Joe1978

Sorry I´m not sure if it´s the correct place for post it: After finishing mission nº9 "interceptor", specifically when I return to the carrier, DCS always suffers the same crash; the picture freezes (although not the sound) and I see on SteamVR the message "waiting for DCS"... I'm just flying back, preparing for landing, etc... There are also several friendly aircraft flying nearby. It has happened to me several times more or less in the same place (close to the carrier). Could it be a mission issue?

I've been reading some articles about the A4 and I've seen that some pilots did something called "wet start". It appears that this starter produced a large flare in the engine exhaust. Does anyone know what it was or if it can be played on our A4?

Thanks!!! I've been working away from home all week and haven't been able to see your message.

Sorry, I recover this old thread (please excuse me for my poor English too). I have one problem with this campaign and I need some help. After finishing mission nº9 "interceptor", specifically when I return to the carrier, DCS always suffers the same crash; the picture freezes (although not the sound) and I see on SteamVR the message "waiting for DCS"... I'm just flying back, preparing for landing, etc... There are also several friendly aircraft flying nearby. It has happened to me several times more or less in the same place (close to the carrier). Could it be a mission issue? Thanks PS: I have repaired the DCS but I still have the same "bug".

Thanks Raven. Yes, I remember that in an interview (before the Apache release, maybe last year) the ED team talked about one of their future priorities being VR... but not much more has been said about it. I cross my fingers. I understand that this type of work (process code) is not at all attractive... but it is very necessary, especially because building a PC according to DCS requirements is more expensive every day.

I also prefer to have as much RAM as possible in my PC´s, although being objective, even today 64GB of RAM is almost double what is necessary for "normal" use. Our problem it's called "DCS" and its voracious appetite for consuming resources; GPU, VRAM, RAM, CPU... nothing is optimized here (especially in VR). With all the respect in the world, I wonder what characteristics the computers of the ED developers have.

Yep you're right, F5 works. Thanks for you input. I haven't had time to check all modules but I find this issue in: Mig Saab Dora

Yes same problem with Mig21, F5....

Although DCS has excellent trainers (Albatros or C101), I would recommend the A4 or the F5.

Sorry to "refloat" this old thread, but this happened to me today and I am not able to fix it. I have changed my password twice but when I enter DCS I cannot register

Any news about this problem?

Hi guys Have you been able to discover something about the problem with the navigation system and the editor ver.2.7?

Muchas gracias!!!!

With all due respect, I like the new update but even flying at an altitude of 200 feet, there is not a single trace of foam in the sea ... not a single white pixel. That in particular (always from my point of view) no matter how calm the wind is, its not very normal. Right now I have the feeling of flying over a lake instead of the sea.

Yes!!! thanks JNelson. I was not coming out of the dive with such angle I update my procedure/notes in case it helps anyone. 1º With an agressive dive (around 45º) Bomb Pilon switch select ON Fuse nose and tail. Ripple Single AWRS 2 (for example) Selector to "LABS" Master Arm ON. AG radar mode A) I put the target on my reticle and "dive" towards it. I try to maintain a stable flight B) The "In Range" warning comes on C) I press and HOLD pickle button/Bomb release button. D) Warning beep sounds E) LABS light comes on (It may take several seconds for the computer to launch ) and off. This confirms the launch E) Break in any direction . 2º With a soft dive (around 25º) Bomb Pilon switch select ON Fuse nose and tail. Ripple Single AWRS 2 (for example) Selector to "LABS" Master Arm ON. AG radar mode A) I put the target on my reticle and "dive" towards it. I try to maintain a stable flight B) The "In Range" warning comes on C) I press and HOLD pickle button/Bomb release button. D) Warning beep sounds E) LABS light comes on. F) Break up (with aprox 45º angle) G) LABS light off. This confirms the launch

Thanks Bozon. I have tried very quickly twice with MK82. 1º With an agressive dive (around 45º) Bomb Pilon switch select 5 and 1 Fuse nose and tail. Ripple Single AWRS 2 (for example) Selector to "LABS" Master Arm ON. AG radar mode A) I put the target on my reticle and "dive" towards it. I try to maintain a stable flight B) The "In Range" warning comes on C) I press and HOLD pickle button/Bomb release button. D) Warning beep sounds E) At the moment, LABS light comes on and off ( I can feel/see a launch) E) I break softly. OK work!!!!. 2º With a soft dive (around 25º) Bomb Pilon switch select 4 and 2 Fuse nose and tail. Ripple Single AWRS 2 (for example) Selector to "LABS" Master Arm ON. AG radar mode A) I put the target on my reticle and "dive" towards it. I try to maintain a stable flight B) The "In Range" warning comes on C) I press and HOLD pickle button/Bomb release button. D) Warning beep sounds and LABS light comes on. E) I break softly. No Work So I do not know if the problem has been the angle of attack has been bad or the selected bays

Yes, for using the CP-741 I use "LABS" mode. The "Bombs & GM Arm" mode works correctly. The launch sequence I´m using is: Bomb Pilon switch select On. Fuse nose and tail. Ripple Single AWRS 2 (for example) Selector to "LABS" Master Arm ON. AG radar mode A) I put the target on my reticle and "dive" towards it. I try to maintain a stable flight B) The "In Range" warning comes on C) I press pickle button/Bomb release button. D) At the moment, warning beep sounds and LABS light comes on E) I "break" softly. ... but no bomb release. I've tried holding press the pickle button when diving towards the target until the LABS warning comes on, but aside from the annoying acoustic warning signal, I haven't gotten a release bombs. PD; I´m sorry. Obviously English is not my native language.

Thanks Nelson, I am trying whit all stations and the bombs are not being released. I think there is a step that I am not doing correctly, setting the objetive maybe ¿?

Gracias Rudel!!! It´s a nice video-tutorial, but I am missing some detail since the bombs are not released from the ventral support. I will continue investigating

Thanks Rudel & JNelson. Ok, I was checking my A4E right now with the selector in the LABS position and the radar working AG. In LABS position, the indicator light "In range" is activated. The white "LAMP" indicator only lights up when I press the release bombs button but... there is no bomb release ¿? I am doing something wrong?

Could someone tell me if the LABS launch is working? Thanks

Yes, it was only available in Iraq units.

If you buy at the right times (sales, offers, miles program...), the cost of DCS is not a large outlay either.

It seems that version 2.7 is scheduled for April 7th. We will have to keep waiting for our Mosquito

Was there a video?....