DCoffey

You got that right!

Just purchased and when I hoped in and brought up the ground crew to apply ground power, the reo menu is half cut off, like as if its inside a smaller box. How to fix?

To add to earlier posts concerning VDS. Make sure you have a ethernet cable from your PC directly to your wifi router, if you have not split your wifi, consider doing that. I have a 2.4 that all the kids, tv's, alexa's, lights, thermostats, etc run on and the 5Ghz just for me. This will make a huge difference (If you are techy you could consider QOS) I found that I can run the VR pixel density at 1.0, and set the VDS to god like (its upscale I think) its the clearest and sharpest image in DCS I have seen.

Are you being condescending to me? My machine exhibited out of norm symptoms by being 99% GPU bound, all new hardware except GPU and now its CPU bound (which is expected) and the GPU is running its little heart out. I don't know why it was GPU bound so I was throwing darts at possibilities. I am now finished with this problem as it nolonger concerns me. My new setup is running like a scalded dog, that I7-14700k is friggin awesome. I just experimented with setting it to 90hz (45FPS per eye) and its smooth as butter. I am not touching anything for a while (next update most likely) Thanks for everyones assistance and advice with this.

Yeah I get it, doesn't make sense but it was what it was. I wonder if low power could have had the card downgrade its performance. Old PC had a 500 watt PSU, and I know the old I7-10700 used about 215 under load and the RTX4070Ti uses 285 watts underload, just those two devices would have put the PSU at its maximum. That could explain the results. I am a very happer camper with this new setup.

Yep, my old system 99% of the time displayed "GPU Bound" It apperas the old system was not capable of pushing enough data to the GPU. As I am getting this new one dialed in I have cranked up new settings that I had off or low on the slider. and am still getting butter smooth framerates and it appears the GPU is just stretching its legs, if I am reading the data correctly its running a little under 70% utilization. Thats at marianas. I am very pleasently suprised at these results thus far. Thanks to everyone for your replies!

The normal with the old pc was “gpu bound” so being that everything but the gpu changed for the better I didn’t expect to see “cpu bound “ https://cpu.userbenchmark.com/Compare/Intel-Core-i7-14700K-vs-AMD-Ryzen-7-7800X3D/4152vsm2081998 I7 on average is 17% better performance

I have a I7-10700, quest 3, 64gb ram at 2666 ddr4, 4tb gen 3 ssd. was getting 36fps (72hz in vr) very smooth decided to build a new pc I7-14700k, 64gb with 5600 ddr5, 2tb gen 4 m.2 same gpu RTX4070ti so faster cpu, faster chipset, faster ram, faster ssd. Dcs now reports its “cpu bound” what am I missing?

Forgive me if this is a dumb question. i use quest 3 headset and occasionally I will get a message that trackir is unplugged. does dcs think quest 3 is trackir? If not can I delete the bindings for trackir?

Do I need a headset or does the quest 3 have a mic? I assume there will be voice communication?

Switching to vds was a game changer for me. Set PD to 1.0 in dcs and godlike in VDS huge clarity improvements and fps increase. bought a good size battery and am now wireless. i did notice dcs looses link occasionally if i use AV1 codec. Hevc 10 works for me with no issues hope you experience the same

Teasers on the new earth fog, everything in fog, carrier in fog, helo's in fog, aircraft in fog, grunts in fog, trains coming out of fog, buildings rising out of the fog, you get the picture. Oh and a UH-1 refresh with new N model with twins.

I always had a slightly blurry vision in VR of the cockpit, I started using VDS and it was like night and day for me. I was able to drop the pixel density from 1.3 to 1.0 which made a nice FPS increase as a bonus

I am instructed to tune to 688khz for adb but I have zero luck tuning it in. rebooted and restarted mission 5 times advice?

Thanks for all the info, I did not realize this had been posted, this is way more informative. Thanks for everyone's work!

Nice visuals and FPS improvement in MSFS, I know it is frowned upon with DCS, for me in VR this is a big improvement. Especially it removed the ghosting with lights that I have been just accepting. but now it's all gone. Not advocating others try it, but it seems to work in my situation. I7-10700, RTX4070ti, 64gb, 4tb M.2

wait you can take over the LSO and air boss?

what ship control panel?

Thank you for clearing that up!

Can't seem to find anything in the manual and nothing in the briefing jumped out at me.

I say a graphics refresh like they did with the KA-52 would be more welcomed, but I know someone else is working on a new cockpit (god bless them)

Great mission, I was on high alert flying way out to sea, twice. Unfortunately, my homing equipment was damaged on the way to pick up you know who, navigating there was a challenge and fun.

it's not some bug DCS introduced, this is as intended. I'll give it some more attempts. Thanks for your response again.

I almost forgot what a terrific campaign this is, mission 5 was a pucker factor!

I've tried this 5 times now, the UH-1 starts out slightly overweight at 9500, the cargo is 3,000 so that makes my UH-1 extremely overweight and can't even lift the cargo off the ground? What am I doing wrong? you don't burn very much fuel from starting point to the cargo area.