TK-421

I agree!

It's hard to get an accurate playback assessment of where the strikes are happening but I just counted the "hit" notifications from the debrief. I counted 100 hits to kill two Dora's, funnily enough it was almost 50 for each plane, don't know if that is just a coincidence. I saw in the December update they adjusted the values for seat armour, that may have affected it. I suppose you would have to test it with other aircraft that have .50 cals on them against other airframes and see? P51.trk

Yeah I was experiencing the same thing. The hit marker feed would keep going and going but the aircraft wouldn't have any form of catastrophic failure unless I'm super lucky. Most of the time the German planes fly away and just crash land from engine failure. It's like you can't actually kill the A.I. pilot.

Does the A.I. still use a SFM or have they fixed that?

If you are moving that will also affect the rounds as there is the inertia of the helicopter, but since OP said this error only happens with a cold start and not a hot start it sounds a little odd.

George will also fall victim to VRS if you tell him to descend to fast or if you hand over to him with a helicopter that is already descending too quickly.

I would love if the native DCS system for VR and NVGs allowed you to look under them without the need for mods. They should never take up your entire FOV.

Would it be possible to have an option in the special menu where George doesn't list friendlies at all? I can't really see a scenario where it would be beneficial for him to target friendly units if he is able to positively identify that they are friendly.

I agree, there needs to be maybe a slider or option for IHADSS transparency? I noticed in the old photos of the module it seems the IHADSS had a semi transparent version, that may better reflect how the eye doesn't focus on close in items and gives them a slight blurry effect. The same thing happens with ghost ring sights on rifles, they look big when you are focused on them but when you look through it up close it turns into a faint line and doesn't block your vision.

Any updates to this? I just exploded while taxing at King Hussein Air College on Enigmas cold war server. Exactly the same issue, few bumps at first caused the pilot to black out, and then it exploded. This should be added to the known issues list for the MB-339

Bumping, I have the same issue

As the title says, I have been setting up a Virpil Sharka panel and I've noticed that a lot of the 2, 3 and 5 position switches for the KA50 don't have individual button assignments but only one option for a push button that cycles in between. Makes having multiple position switches useless for a HOTAS set up. I know this can be fixed via editing the files within the DCS game but it would be nice if the Devs could make these more realistic buttons maps for the Black Shark 3 as standard.

Processor 11th Gen Intel(R) Core(TM) i9-11900K @ 3.50GHz 3.50 GHz Installed RAM 32.0 GB (31.8 GB usable) Card NVIDIA GeForce RTX 3080 Ti I've been running Steam VR with a valve index, but I think I need to go to OpenXR...

This is what it normally looks like when running the cold war server with the Huey.

Hey I'm encountering this as well? Bought the Huey and the Hind on sale. Huey is smooth as butter in VR, but the Hind is a mess. Stutters and lag, then eventually crashes. I have tried multiple instant action missions. Any fix? dcs.log dcs.20220629-072216.crash

Hey @RealA4EPilot You wouldn't happen to have any photos of the cockpit of an A-4 set up for the AGM-12 Bullpup or the AGM-62 Walleye? I figure there was a controller joystick for both of them and a TV screen installed for the Walleye but I can't find any photos of what they actually looked like when installed inside the aircraft. Closest information I could find was this doco;

Dude this is amazing, exactly what I was looking for. You wouldn't happen to have dimensions for this?

I found this 11 position rotary switch for it. The only issue is that it isn't 360 degrees like the real one, but that isn't much of a problem.

Thanks for the info! I like the idea of that Bodnar board, seems fairly simple. I think I might have to use DCS-BIOS to figure out this dial. It is for selecting the pylons and there is something like 11 options on the dial. DCS recognises it and "next" or "previous" to cycle through. I also only fly in VR, so I do not need outputs for dials or monitors, just physical things I can reach out and touch.

Hello, I have been browsing through a few of the topcis through here and this looks like a lot of fun. My airframe of choice is the MiG-21 because it should be pretty simple. My first plan is to experiment with an old cheap thrustmaster hotas I have lying around, I was going to pull it apart and replace the buttons with ON-OFF switches. I figured this would be easier as it already has the software support built in. My next project was going to be figuring out how to do multiple position dials and 3 position switches, such as the pylon selector in the MiG-21 or the IR-Neutral-SAR switch. I was hoping you guys could advise me on the most suitable program for beginners, I saw that DCS-BIOS seems to be popular, but it also has been around since 2015. As of 2022 is this still the go to program for this type of project or is there another program you would recommend? Cheers!

Здравствуйте, во-первых, прошу прощения за использование автоматического переводчика. На форумах по МиГ-21 нет англоязычного раздела. Я хотел задать вопрос о системе RWR, насколько я понимаю, когда вы слышите устойчивый сигнал и загораются все четыре индикатора, это означает, что вы заблокированы. Однако у меня были некоторые ситуации, когда я получаю ровный звук, но не загораются индикаторы, это часто происходит на серверах, где МиГ-21 сражается с современными истребителями, такими как F-16. Вскоре за ним все еще следует AIM-120, так что я знаю, что меня заблокировали до того, как убили. Так это система Ф-16 с использованием "мягкой блокировки", а не СТТ, или это баг?

I am having the same issues with the radio feed back since the last update. Whenever I use the intercomm menu or the PTT and then go through the F key options I do not get any response either by voice or text. This is happening with my wingmen, the ATC, AWACS and ground crew. This problem seems to be specific to the open beta and the MiG-21. I tested the F-16 and it works fine, even on the open beta. In the MiG-21 when I went back to the stable version it was fine, but then back to open beta same issue. Happens in single player ED created missions and multiplayer servers Freq has been verified (it is highlighted in white as well, checked multiple presets) SRS comms still works as normal, I checked with Enigmas cold war server with the AI AWACS and it was fine. I checked the integrity of files through steam and it was normal Audio input/output is still set to my valve index, tried it on a normal headset and the issue is still there. The ground crew still carry out the rearm but remain silent My pilot still talks and sends messages DCS log.txt dcs.log

I am having the same issues with the radio feed back since the last update. Whenever I use the intercomm menu or the PTT and then go through the F key options I do not get any response either by voice or text. This is happening with my wingmen, the ATC, AWACS and ground crew. This problem seems to be specific to the open beta and the MiG-21. I tested the F-16 and it works fine, even on the open beta. In the MiG-21 when I went back to the stable version it was fine, but then back to open beta same issue. Happens in single player ED created missions and multiplayer servers Freq has been verified (it is highlighted in white as well, checked multiple presets) SRS comms still works as normal, I checked with Enigmas cold war server with the AI AWACS and it was fine. I checked the integrity of files through steam and it was normal Audio input/output is still set to my valve index, tried it on a normal headset and the issue is still there. The ground crew still carry out the rearm but remain silent My pilot still talks and sends messages Seems like this is randomly happening to a few people, good to know I am not alone. dcs.log DCS log.txt