Moxica

Don't think so. I turned it off every time I went back to the boat to rearm. Last (seventh) time I turned it on, it was like that.

I was just thinking about that just now, as I've flown for HOURS when suddenly it stopped working, and it just hangs there like a fricken paralyzed leg on a broken spine. "Boresight" does nothing. But I checked, and there is no signal when centered. Even if that was the culprit, how can one reactivate, Because it does not react to any input. Damn that was way more than annoying! My beer went all flat from me cursing,

Depending on the position of the virtual switch at the start of mission, it often has reversed position in relation to the one one my throttle.. Up becomes down.. on becomes off. Same goes for the magnetic brake. "Very nuisance"

The brightness and the contrast controls (pots) can be assigned. But the increments are to large, and is stepping about 1/5 with each step. I have assigned them to arduino rotaries,, still with the same result, making it impossible to adjust to a useful level.

Hmm.. I have assigned the HOT3 selector to a rotary. Sitting here at work, I wonder if that one "ASS/Boresight" control is also bound to the (next) rotary, and that I might have come to touch that one by accident from time to time.. Fumbling blindly from behind the VR goggles. You know.. Those things happen. Thx for bringing it to my attention, MAXsenna!

Thx. I'll look for an update on Massun's.. Hope there's a field shower included now.

Yeah. I know which button you mean. I'll try. (I think I've triad allready, though. You know.. "clicking everything" when having a malfunction..) Thing is; Re-center stops working, Annoying af.

Is he from a mod, or one of the default crew? Because he is smoking when hit.

Whaddyamean boresight? Wut?

I can confirm the uncontrollable drift; Monitor goes black, re-center button does nothing until suddenly monitor comes to life, but camera is uncontrollable. I've had to give up countless missions because of this.

Here's an "official" quote: "The TSD can display more than 16 targets when set to the attack phase, but all low-priority target symbols will be displayed at half the size as the 16 high-priority target symbols. The C-SCOPE and ZOOM functions on the FCR page are not currently implemented, nor is the LINK function on the Sight-Select switch. These will come later in early access, along with other radar modes." I'm hoping the "ZOOM" function helps distingushing targets on FCR.

Sounds like rocking good news! Thanks a lot. I had no idea!

I'd like to do a cinematic. I tested on a short mission yesterday. But on replay, all the Gazelle's missiles went straight into the ground. Looks like I can not use the replay method

..so I tried a mission on Normandy, and it gives me half of the framerate compared to other maps (I.e. South atlantic) Install prompt is still there.

I started install, and it downloaded, but ended like this. 00000.088 --- Log file: F:\Eagle Dynamics\DCS World\autoupdate_log.txt 00000.000 === Log opened UTC 2024-02-25 20:53:05 00000.020 INFO : DCS_Updater/2.16.2.17 (Windows NT 10.0.22631; Win64; nb-NO) 00000.020 INFO : src-id: 5972e82a1851d36865c17506579c27cbd5b8e3b4, lib-id: b88ea51ae2210987a3865f77cc1802548216d7a8 00000.020 INFO : cmdline: "F:\Eagle Dynamics\DCS World\bin\dcs_updater.exe" apply e69b5405-19ba-4c56-b2da-26a79bce11bb 5856 00000.060 STATUS: Initializing... 00000.085 INFO : basedir: F:\Eagle Dynamics\DCS World 00000.087 INFO : Command: install NORMANDY_terrain_new 00000.089 INFO : DCS/2.9.3.51704 (x86_64; EN; WORLD,A-10A,MARIANAISLANDS_terrain,A-10C_2,A-10C,PERSIANGULF_terrain,AH-64D,SYRIA_terrain,F-16C,NEVADA_terrain,BALTICDRAGON_A10C_IRON_FLAG_PART1_campaign,GROUND_POUNDER_SIMS_A10C_OPERATION_PERSIAN_FREEDOM_campaign,BALTICDRAGON_A10C-ENEMY_WITHIN_3_campaign,SUPERCARRIER,FA-18C,SU-33,SPITFIRE-MKIX,WWII-ARMOUR,THECHANNEL_terrain,POLYCHOPSIM_SA342,UH-1H,A10C-TTQ_campaign,A10C-BFT_campaign,FALKLANDS_terrain,COMBAT_KING_SIMULATIONS_A-10C_OPERATION_AGILE_SPEAR_campaign,BADGER633_FA18C_RISE_OF_THE_PERSIAN_LION_campaign,NORMANDY_terrain,BALTICDRAGON_FA18C_RAVEN_ONE_campaign,REFLECTED_SIMULATIONS_UH-1H_PARADISE_LOST_campaign,AJS37,P-51D,CA,BADGER633_FA18C_RISE_OF_THE_PERSIAN_LION_II_campaign,HEATBLUR_F-14,REFLECTED_SIMULATIONS_SPITFIRE_BEWARE_BEWARE_campaign,A10C-STONE_SHIELD_campaign,CAUCASUS_terrain,BF-109K4,MOSQUITO-FBMKVI,P47D30,SPITFIRE-MKIX-THEBIGSHOW_campaign,STONE_SKY_MAD_AH-64D_campaign,SINAIMAP_terrain,LOOKING_GLASS_FA18C_INHERENT_RESOLVE_campaign,STONE_SKY_MAD_campaign,F-86F,RAZB8 00000.089 INFO : branch: 00000.090 STATUS: Downloading version info... 00000.872 STATUS: Preparing to install NORMANDY_terrain_new ... 00000.961 STATUS: Unknown module NORMANDY_terrain_new 00051.148 === Log closed. null

I still havent made a single DCS movie yet, but this is what I figured: (I once capured from VR, and it was a shaky mess) I fly in VR, so I'd have to save a track file? I'd have to change monitor resolution to use full screen flat PC monitor as source? I'd have to capture same track multiple times from different angles? Will that be the most usual way to do it, or am I missing some more efficient steps? (Not asking about fancy camera positions and shortcuts for those. And I know how to edit movies once I have the footage.)

Makes sense; I got a New PC, and just put the old drive into the new one, and the copied installation to an M2 drive. -And now that Beta is gone, what to do with all that extra space? :P

Thanks, but but there is no "Eagle Dynamics" under HKEY_CURRENT_USER\Software in my registry. I'm doing backups an removing as per BigNewy's advice.

I have both vanilla and beta on my PC. Now I can/want to remove one of them. Do I just delete? Do I use some uninstall function? Which one should I keep?

THX! It is "Trimmer" And whaddyaknow! It was still assigned to the "look up slow" after I assigned to "Trimmer" I deleted that, and voila! -Now I can start loving her again!

Thx mate! I suspect you are on the right track.I want to trim like you do, but I don't remember the name of the assigned function. I tried binding all trim and magnetic brakes I could find, but they do not trim like it used to before the patch. As in: I did not use the auto-hover, I just trimmed it into stability. It used to work like the AH-64 trim. (Position stick/pedals, click, and let go) -I'm looking to assign the "click"

I would like to assign the ah-64 style trimmer, but I can't get it to work; I assigned the "trimmer" and "trimmer off" for the pilot, but they do nothing. Also;, There are no "trimmer" for copilot, only "trimmer off" Halp!

I had two missions (F-15E "Enemy bomber raid" is one) that was allways jerky. Upon testing both "troubled" missons now, one was completely fluid, and the other was very much there, and absolutely acceptable. No doubt there is a VR perfomance increase. (Alas I believe it came with a tiny cost of reduced clouds quality, but if so, I totally agree with that decsicion)

Same, and now I can not assign trim. Whatever alternative I choose, they all turn the master on or off. And the mouse is deactivated for so many functions.. (Like Labels on/off)

"Link" not doing anything in AH-64, and ground crew emits smoke when hit..