ctguy1955

For some reason, today everything is working in all three models, at least in Mission Editor anyway and I am all set ! Wish I could have just deleted the thread instead of this. My TM Warthog is fairly new and I do not know how to use the Target GUI at all. I have my M and L model flying very well, but the Mistrel has these red bars over many of the commands and I cannot get my pedals nor Warthog Hotas to function the same way as the other two versions. No joystick pitch or roll is worst enough, but no thrust nor even being able to use my yellow crosshair to flip any switches, although keyboard commands do work. Thank You for any advice !

I had downloaded and installed the 5.42 one and it was not working

I am sorry but I did not write down the upgrade, but it was released on Aug 2nd and is the one year anniversary upgrade. The LED and all lights on my Track IR 5 stopped working. I got the sound when I plugged in or unplugged the device and it did show in Device Manager. I felt very badly that my 1 1/2 year old TIR5 was fried. This was last night and today I did a roll back ( system restore ) and now the Track IR5 is working just fine. Just thought I would give others a heads up.

I have been using mine for just about every day for over a year now, and tonight my camera just died !!! I hope I can just buy a new camera from NaturalPoint. I will look into if its getting any juice. It does see it in Device manager.

I have always updated my DCSW files and I have no ability to ever choose rockets. Is this something that can only be done offline ? Mission Editor ? I would appreciate it very much if someone would give me a heads up on where I can find the rockets ? Thank You !!!

Thank You for uploading the calibration tools !!! When I try to fly the Dora and let go of the joystick, she vears to the left really bad. Now that I have read Yours and other peoples numbers, I will be able to see what mine are and hope the calibration tool will help me with the Dora.

Yesterday I received a new PCB board in the mail and now My throttle is as good as new !!! TM sure is nice !!! I am ok with my TM rudder to replace my broken Saitek Pro rudder pedals, but I wish it was as easy to fix them as my throttle was. Saitek wont sell you parts to fix things. I know there is a guy in england who sells green boards but Im not sure its an exact replacement with the two plug ins that dont need to be soldiered ? The TM rudder pedals are too close compared to the Saiteks, and do not have adjustable tension, which I like. Wish I could just send the whole thing to someone have get it fixed.

OK, so I just got a new TM Warthog Hotas and when flying the Dora, I have to constantly keep a LOT of pressure on the stick to the left in order to get the Dora to fly straight. Can someone please tell me what I can do to change this ? Can I use some sort of curve or anything that will allow the dora to not need constant left pressure ? The Mustang has the ability to do so from the cockpit left side dials, but We know the Dora only has weight changed for front to back. Thanks for the help !!\

I really like the "L" model, I find it much more easy to fly. I cant get the MG Pod to fire, have not tried the space bar though..... Great Job !!!

My New Warthog Throttle had only been used for two days ONLY and stopped working. I get a "USB device not recognised" message every time I plug into a USB port on the PC. Joystick and Pedals work fine. HELP !!! I cant get the "Throttle Bulk Driver" thing to work at all either ????

I used my brand new from NewEgg Hotas and after two days my joystick and rudder pedals work fine, but now my Throttle only gives me a message that USB device is not recognised and I have read about bricked and other things but cant seem to fix it. Tried it on a old 32bit laptop and it was not seen at all. The target software used to see it when it worked and also does not see it now. I tried doing the Throttle BULK driver and must have done it wrong. I would really appreciate some help with this as I had to save up for a long time to buy the best hotas on the market and to have this happen after only two days is just terrible. I have reinstalled drivers and everything I can think of. I cant upgrade firmware and dont know whats up

My new pedals and joystick are just fine, but my throttle only worked for 2 days and now i only get a "last USB plugged in is not recognised" message. The Target GUI also does not see the warthog throttle either. I am a little confused about installing the throttle bulk driver, but something needs to be done as only two days of use and then it stops working is really problematic for me !

My Warthog Joystick and pedals are working, but My Throttle only worked for TWO days and now is not recognised by usb port. Tried powered hubs and front and back 2.0 ports on ROG VII Formula (3003.cap) Tried doing the "installing the throttle Bulk Driver " and no luck but I most likely did it wrong. HELP !!!

The Video I watched mentioned $9.99 and then I saw this: Originally Posted by Starway "It will cost $ 14.99 and will be available very soon!" I have not been following any of this on the forum, and have been just waiting to see it available as a Terrain or Mod or whatever. Now its donations for it to be available. All I know is that I really liked the way the new "mod" makes things look and that I want it very much. I'm waiting on my first retirement check to arrive, or my income tax check, and then I will gladly contribute, and I really hope that this becomes a reality.

My cat knocked the rudders off the table and rods and round black circle things went all over. I found my soldering iron at least, as we moved and everything was in boxes. I had asked about checking out the USB plug first, I have 5 volts of power but am not sure how to test: the USB cable has two blacks, a white, a red, and a Green. The Green board shows from top to bottom, : *VCC *0_ *0+ *Gnd *Shield OK, I just tested the red wire and I have 5.08 volts using the shield as my grnd. I have no idea of how the Data + and - will be tested ?????"

Thank You Cibit and Pocket Sized, appreciate the help !!! Have a great Weekend !!!

Thank You Sokol1_br I appreciate the help very much, Thank You for Your Help. Mike

Hard to believe that in this Forum, i cant get any help

I am not up to speed with how things work anymore, but I was wondering if because Win 10 with DirectX 12 makes any difference using DCSW 2.0, as its only using DX11 to run it? I know my twin 680 4 gigs now double the video ram of the cards and makes things run better, but Im not sure if the OS running faster or what will have an effect on DCSW. Thanks for giving me any info on whats what with this Mike

Thank You !!!! I just found my Fluke 73 series Multi meter !!!!! OK, so the USB cable has two blacks, a white, a red, and a Green. The Green board shows from top to bottom, : *VCC *0_ *0+ *Gnd *Shield OK, I just tested the red wire and I have 5.08 volts using the shield as my grnd. I have no idea of how the Data + and - will be tested ????? Id appreciate some help with this..

I lived in Schwetzingen, Heidelberg, and Worms for almost 3 years and I came to respect the German People ( well back in 1972, it was West Germany, so I really only was able to meet West Germans ) and I find it very very hard to believe that if the Mustang has a mirror in 1944 or 45, then WHY would the Dora not have the same advantage anyway ? Does anyone have any info about the Dora and Mirrors ? Thank You, I love to learn.

board testing Would You have any idea how I can test my unit to see if its the board or USB cord. I recently moved and am having a hard time finding my multi meter, but I do have a continuity tester available. Thank You !!!

I spent 200 on my rudders and they are nice to use when they work, and there are replacement boards by Leo Bodner. replace the standard Saitek electronics with one of our universal USB joystick interfaces then something like this product would be suitable for your requirements: http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=94&products_id=204 it would be a lot less expensive to fix what I am familiar with, then to buy other pedals that may not be comfortable for me. The new Thrustmaster ones look terrible and have their pedals way too close. Besides, I'd rather take the extra money from not replacing mine and buying: http://WWW.newegg.com/Product/Product.aspx?Item=N82E16826280021

I cant find my copy of the "Idiots guide to test Saitek Rudder Pedals with a multimeter" and would like some info as to where to begin please..... Thank You for any help

Since you have the meter check continuity between the usb plug and the corresponding wires inside the pedals. __________________ I have it all open, so Im going to give this a try. All wires look good. My Razor Orbweaver is now giving me problems as well..... System does not see it because of lack of driver and Razer Synapse does not see it. While the rudders do nothing but the power light coming on, the orbweaver does show up in device manager as something not recognised ? Thanks for all Your Help !!! \