kylekatarn720

I ll be in San Francisco in a week. I need a store name and an address from where i can buy a trackIR 5. I cant buy it online. Price is too freakin high in my country cos of the exchange rates. so please help me fellas:helpsmilie:

well, lets say that you want the play the georgian hammer campaign without the CA. And you want to play it with a friend. what you need to do is, first you need to edit the missions u want to play in that campaign to add multiplayer slots for your friend to join. lets say your friend wants to use a f15c in that mission. you just need to create a f15c flight and select "client" from the skill level menu. after that just load that mission u just edited on a server so u guys can play together. in your case what you need to do is open a mission from the "georgian hammer with ca" campaign using mission editor and add a slot there for your friend. That slot should be somethin like "game master" or "tactical commander" or something like that (like nomdeplume said above). you should check the box says players can drive for the units that u want to control manually(again like nomdeplume said above). After doing all of this just get in to multiplayer, create a new server, add the mission u just edited to the mission list and start the server. Still ive never tried to create a multiplayer mission with CA, so im not exatly sure that this is the right way to do it but it should work.

Get into adjust controls menu. Select A10C from the drop down list. press the "make HTML" button. quit the game. post the html files which u will see after exiting the game.

my pleasure:thumbup:

well i dont have any of them for stick or throttle but nullzones and curves are not something you should just check out from the internet and set a standart value. if you feel like you need them just try them out.

close the canopy

ah im not sure if its cos of the skill level but you should check that out. just select the ai flight inside mission editor. there is a section called something like "skill" or "skill level" above the waypoint and payload tabs.

hey man, im using tm warthog and tflight rudder pedals. One thing you need to check out is the axis commands section inside controls. i dont know if its only happened to me but after i plugged in my equipment dcs tried to assign pitch roll rudder and throttle axises to every equipment. so when i put in some right rudder at the same time it input right roll and right throttle. just check them out if u experience something weird. Edit: im not sure if you are aware of it or not but i wasnt until someone said it to me. you can lift up your throttle and pull them back for shutting down the engine and u can lift them up push them forward for starting the engine.

Hey man, sometimes if i dont lower the collective all the way down after the touchdown i get the same thing. Maybe its cos of that.

Well u can select and play the 2. mission directly from the mission instead of the campaign menu if im not mistaken.

well, lowering the flaps to down position from maneuver position does pretty much the same thing with flare. i know the procedure is different but i didnt experience any problems this way. but you are right i should have said that this wasnt the standart procedure. gonna edit the post right now.

i use easy comms too. however i actually tune and use the proper radios if im not busy doing something more important in the cockpit. But i cant get that ground crew option "white" no matter what i do. if someone can tell me how to contact ground crew without using easy comms that would be really cool.

lol u want more brrrrt?:d

hey man, first of all im no expert on aviation or on dcs. Im just a guy who loves spending time in this game. If i gave some bad information im sorry and feel free to correct my mistakes. I ll be more than happy learn from them. in my opinion if you really suck at doing something, you shouldnt try to learn it in a10c. a10c is a complex aircraft lots of systems lots of details(dont get me wrong having more detail doesnt make it hard it just takes more time). get in the su25t and learn to use the hsi ,the adi and the AoA indexer for instrument landing. reason for this is su25t has ssm modelling which means you dont have to learn and use the various systems of the aircraft unlike a10c. hsi , adi and the AoA indexer are pretty much universal instruments for aircrafts. And they can guide you to the airfield and give you precise information on landing if you use them right. Just get in the su25t and try to land without damaging the aircraft. after you manage that try landing in crosswind, bad weather, low visibility conditions, just try them step by step, not all together like a midnight 10m/s crosswind with storm plus mist. when i started this game, first thing i tried was to take off and try shooting things but after 1-2 hours i realized that landing perfectly on any condition is the hardest thing you can do on an airplane. so i pretty much practised landing in various weather conditions for 2-3 weeks. this is what i learned, as long as your aircraft systems or not damaged, in any weather, in any visibility conditions there are 3 instruments you always have to watch, they are hsi, adi and AoA indexer. as long as you know what they are saying, you can land without a problem. Once you learn how to use them you can land pretty much every freakin aircraft in this game. Only problem here is this, if you try to learn them on an asm modelled aircraft like a10c u will have to learn the systems that govern the hsi and the adi. like tacan and ils on a10c or like the rsbn on mig21. so my advice is get in a simple modelled aircraft(su25t, su33, su27,f15 etc.) and learn these instruments first. Still if you want to learn it in a10c here are some advices. 1)always contact the atc and follow the bearing they give you. it will let you put some good distance between you and the runway so you can land nice and relaxed. 2)dont lower your flaps to down position until a moment before you touchdown. lowering them fully at the right moment will cusion the landing and you will touchdown like a feather. 3)when setting up the course on hsi dont use the course information given you by the tower or the f10 map, or the cdu s divert page. use the ones in your kneeboard pages. find the airfield you wanna land and get the course information from the detailed page on the kneeboard. airfields have more than 1 pages each on kneeboard use the detailed one for the course information not the simple one. 4)lower the voice of tacan and ils. it will break your concentration. 5)usually u wont have to use the tacan just select the airfield from the cdus divert page as your steerpoint. 6) dont forget to put flight director needles switch to able on the navigation mode select panel(its right behind your flight stick). 7) if you wanna do something while you are on your landing approach, do it slowly. no sharp 70 deggree turns or pushing the trottle to max cos you see low speed indicator on the AoA indexer. Edit: second advice is not the standart procedure. its just the way how i do it. thanks for Xavven reminding me of it.

hi fellas, So here is my problem, you are supposed to radio a ground spec ops unit when u enter waypoint "Ip inbound" so they can help you with identifying the targets. I cant communicate with the ground forces at all. at first i thought that i was going to use the f10 radio function to talk to them but there is no f10 function after requesting the sam footprints. and i just watched someone else play the mission 8 on youtube in case im the one doing something wrong but the guy i watched just did the same things as me , flied throught that checkpoint and radio talk started automatically. it doesnt work for me. thought it could be some trigger related issue and opened the mission editor only to find there are no triggers :d. anyway need some help here cant figure it out myself.

Still im gonna change my avatar to this. Just to remind myself this exact moment:) Edit: Done. And Thanks for the help ^^

Dude H*** F*** S***, i bought the warthog a month ago and im pretty much spending 2-3 hours every freakin day using it and i didnt even know or realised that u can lift it. Im such a dumbass.

Hi fellas, My problem is, when the throttles are in the OFF position i cant move them unless i use "RAlt+Home" and "RCtrl+Home" keys which are the left and right engine start buttons. I got a thrustmaster hotas warthog and it really bothers me that everytime i need to use the keyboard to release my in-game throttles first so i can move them with my thrustmaster throttles. Am i missing something here? Or doing something wrong?

uh1h campaign, got screwed up. every once in 2 or 3 missions, triggers dont work properly. and everytime i had to quit the game open the mission in mission editor and find and change the broken triggers and play the same mission allover again. oh and the patch deleted my campaign progress. EDIT: I dont have any mods installed.

damn should have looked into this flight modules before buying fc3. i prefer russian ones 2 , its not that i dont like us made ones(i appreciate the beauty of both sides:d) but the imperial system really really pisses me off, everytime i try one (and i actually do every 2-3 days) seeing nautical miles and feet forces me to quit.

Dunno man i started this game a month ago and i love it but there are lots of bugs and glitches. There are too many aircraft if u ask me. I know they want to make people get curious and spend money on it but having 20 simplefied aircraft is worse than having 4-5 detailed aircraft. You should be able to say to yourself that "im really learning something about this aircrafts systems" and u cant say that if it takes you to press 3-4 buttons on keyboard to get a jet from parking to take off. I mean this is supposed to be a simulator.in this simulator I can fly a su33, attack and destroy targets with it, and land it on a carrier. If someone put me on real su33 cockpit right now i wouldnt even be able to turn on the gear lights. I m not expecting to be a real fighter pilot after playing this game but i am expecting to learn about it while im enjoying it. Edit: Got distracted from our subject a bit. I think the main reason of these bugs is they are trying to give more options to people instead of more detail. they are spending more time creating new aircrafts instead of trying to perfect what u have before creating new.

Ye just managed to do that myself it works now thx :d

EDIT: I just did the changes you wanted but same thing happens when i start the mission. Anyway gonna try it myself a bit. Thanks for the help anyway^^

thanks a lot for the help man, gonna tinker around a bit with the campaign builder before posting here from now on :d

oh guess i forgot to mention them:d heavy sky campaign and its the 16th or the 17th mission. objective is to take off from the carrier intercept air targets in senaki area and rtb EDIT: Its not 16th or 17th i just checked it again. And i dont know the mission number. just couldnt find the mission number EDIT: Used the mission planer. Mission file name is fc3_5_33_010_en.miz