Charlie122sq
Members-
Posts
34 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by Charlie122sq
-
-
The first one is historical 100% and the others 2 are the skins in the RF-4C IRL. The F-4C was in the Torrrejón de Ardoz AB in the "Ala 12" (Wing 12) in 2 fighters squadrons, 121 and 122 until their replacement by F/A-18. A third squadron, the 123, was specialized in Recon with the RF-4C (With a refueling probe attached) until their retirement in 2002. When I finish fixing and adding some details and "dirty" them a bit, I'll upload them.
-
-
After the 2.8.0.33006 OB update, i can't get working the velocity switch, doesn't matter the position, always shows CAS speed ( "C" in the HUD)
-
DCS World TARGET profile for TM Cougar and Warthog + MFDs
Charlie122sq replied to Home Fries's topic in Thrustmaster
Hi, i am using T-45 Goshawk profile with Hotas Cougar, 2 MFDs, TrackIr, Vaicom and SRS. Some keys are not working like Nosewheel Steering and others do different things like disabling Vaicom when i press DMS down, enabling or disabling CommState when i press CMS UP or DOWN, enter profile change mode and changing profiles when i use Dogfight switch. I have noticed that when i change to T-45 profile, the gear state is always up (light off) and there is an execute error: There is no tmc module for the T-45 I don't know if that is intentional -
DCS World TARGET profile for TM Cougar and Warthog + MFDs
Charlie122sq replied to Home Fries's topic in Thrustmaster
Thanks. Understood, i thought that setting was for change how airbrakes works in the desired profile. Anyway, The real F16 airbrakes works like Bynary-Momentary, it is possible edit the script for change it and make it work with the cougar? could you do it for next updates? -
DCS World TARGET profile for TM Cougar and Warthog + MFDs
Charlie122sq replied to Home Fries's topic in Thrustmaster
Hello Home Fries, I want to know if i am doing something wrong with airbrakes logic. I have set in CTS VALUES, DCS: Standar DirectX, Aircraft Type number 0 (Binary-momentary), this should do that airbrakes works when the button is held and it close when button is released (like works in real F-16), but when i choose a plane, always is set in Type 3 (Analog-Momentary). I go to Directx config with profile switch and press S3+T9 to cycle airbrakes type and just cycle between Type 0 (Binary-momentary) and Type 1 (Binary-Discrete). I choose Type 0 and switch back to an aircraft profile and now to open the airbrakes i need a lot of clicks, holding button does not work. -
I took model from this site: http://www.arcforums.com/forums/air/index.php?/topic/299453-monogram-148-f-86-sabre-jet/ i tried to get the same colors and matte effect i hope you enjoy it Download Link
-
I meant ICS Hot Mic option on This options are the same i have always had EDIT: When Vaicom start, "HOT REL" is orange, if i turn it off, VA stops listening but if i active it manually and then i press ICS comm button one time, HOT REL turn on again and Hot Mic works fine
-
Hi, Since i updated VA and Vaicom, Hot Mic in F14 from pilot with Jester doesn't work, i have to press INT comm button to make it work, if i try without do this, i have "Command 'select' is currently disabled for this session and was not executed." in VA. I have both Hot Mic switch in Vaicom and cockpit on. Before the VA and Vaicom updates it was working fine
-
Doing a CASE III, initially the ship gives a Marshall course and a final course, but then the sip change his course, due to a waypoint, and does not warn of it. Before 2.7, it did. This Happens with all Supercarriers ships
-
I have a "halo" around the plane, as a low resolution shape, only shows with the new clouds and with any module. I tried with all clouds graphic options, diifferent MSAA and anisotropic options with the same result. I have an AMD Ryzen 3800x, 16gb RAM 3200Mh, AMD R9 380 with the last drivers installed
-
DCS World TARGET profile for TM Cougar and Warthog + MFDs
Charlie122sq replied to Home Fries's topic in Thrustmaster
I use S3+H3U/D to cycle the gear, maybe this is not sending the gear state signal, i will try S3+T6 Thanks -
DCS World TARGET profile for TM Cougar and Warthog + MFDs
Charlie122sq replied to Home Fries's topic in Thrustmaster
Hey Home Fries, i can't make work Lantirn Mod with my Cougar, i set CTS Lantirn option at 2, rebuilded script and loaded. I go to controllers, load keyboards and joystick profiles again, the new options are showed but when i press S3+T1 long it doesn't change to Lantirn master mode, however i can turn on/off lantirn camera, move it with microstick, toggle Laser master arm etc. I tried with your controller lua improvements and the original mod -
Thanks, i will try
-
Hi, i want to do a mission where each time a player or client go to fly, spawn in a random position, both in sp and mp, that is possible?
-
DCS World TARGET profile for TM Cougar and Warthog + MFDs
Charlie122sq replied to Home Fries's topic in Thrustmaster
I think i fixed, i set CommState Allow to 0 and now is working fine. I see all buttons and i haven´t double press -
Hi, when i put the keyboard default.lua from Lantirn Mod, DCS freeze on controls setup page or loading a mission, it happens to someone else?
-
DCS World TARGET profile for TM Cougar and Warthog + MFDs
Charlie122sq replied to Home Fries's topic in Thrustmaster
I have cheked and it is set to 1, the issue persist -
DCS World TARGET profile for TM Cougar and Warthog + MFDs
Charlie122sq replied to Home Fries's topic in Thrustmaster
Hi Home Fries, i am trying to setup the SRS as manual says to use the F18 and MIDS radio, i set SimpleRadio Standalone value to 1 in Global section. I execute the script and then open SRS, i set RADIO 1 and RADIO 2 in buttons 20 (comms switch left) and 22 (comms switch rigth) but when i try to set RADIO 3 in button 21 (comms switch down), button 20 is activated or "keyboard 44" is displayed: and button 23 (comms switch up) doesn't even work. So if i push comms switch left or down, button 20 is actived or "keyboard 44" displayed, rigth is button 22 and up doesn't activate anything. I try in DCS controls setup to set buttons 21 and 23 and they are not working. In DCS i can use button 20 and 22 for SRS comms , but when i depressed any one, sounds like a double click and "TR" turns on and off even if i keep pressing the button. I have checked the buttons in case they were malfunctioning in Windows, others simulators and without the script running and all of them are working fine. This is with a HOTAS COUGAR with COUGAR stick -
DCS World TARGET profile for TM Cougar and Warthog + MFDs
Charlie122sq replied to Home Fries's topic in Thrustmaster
Nope, is Hotas cougar with cougar stick -
DCS World TARGET profile for TM Cougar and Warthog + MFDs
Charlie122sq replied to Home Fries's topic in Thrustmaster
Hi, i updated to 2.46, i put the .lua flie for F14 Lantirn mod from CTS¡s custom luas files and 2.46 profiles for the keyboard and the hotas cougar. I selected SC and set the Lantirn value for F14 in 2. In controllers i have new options in F14 Pilot section to turn on the Lantirn pod in LMFD, even i have Air Source options in RMFD and set slew axis for Lantirn. But i don't have any other option like S4 buttons, laser latch, WHOT/BHOT, etc... set in the hotas, just in keyboard i have keyboards commands without modifier. I can't make it work -
[RESOLVED]DCS Crash when CPU does not support SSE 4.1 or greater.
Charlie122sq replied to TempRyan's topic in Game Crash
Working again, thanks