Jump to content

DMouse

Members
  • Posts

    46
  • Joined

  • Last visited

Everything posted by DMouse

  1. Go to windows setting>Mixed reality>Environment. Then try clear environment data. This can help with head position jumping around. Also you can try a reset as well and re do the rooom boundary if you use that. Hope that helps
  2. Hey Lawndart, I am looking to get back into to some online play. I was previously a member aka PBSmooth, used to fly the A10C. Any chance of an invite, my discord user name is DMouseCA007 Cheers Paul
  3. Apologies if I missed this. But is there an indicator that shows the current speed brake position, or on/off light? Searched the manual and can't find anything in the plane? Thanks
  4. One of the Razbam Team (Galinette) has been posting a few videos of the LANTIRN I believe, on the Razbam DISCORD channel https://discord.com/channels/536389125276827660/544231925263630336/1106243145554997419
  5. Ok so just ran it again. Looks like on initial departure even though I am supposed to call on Strike, they are actually on Comm1 Channel 1. Also for marshal on return the frequency doesn't match. I have also noticed that the Comm 1 and Comm 2 Kneeboard freqs for Marshall also don't match. I managed to finish the mission, but a little frustrating.
  6. So i get the comms check in on startup, but nothing after that. I get the text messages for Chaff/Flare and Fence In, but no voice at all. I have checked I am on the correct frequency and that all appears ok. Thanks in advance for any input!!
  7. Does the MT support AMD processors as well as Intel? I am running an AMD Ryzen 7 3800X 8-Core Processor, but not getting a significant improvement in VR, for a GPU I have a RTX4090 so should be good there. The biggest thing in MT I am noticing is blurring of buildings while rolling or yawing the aircraft. It appears better in non MT version. I know we are only just in MT so I expect things will improve over the next few updates. Any thoughts regards AMD vs Intel CPU?
  8. As for the mixed movements, that is because DCS will assign axis to the rudder for both elevator and ailerons, make sure to delete those. Also check to see if your trim switch has been assigned to the views, you may also want to delete all of those as well. After that try the options below, good luck! If deleting the config folder doesn't work there are three other options. 1: Do a repair, which should be easy to find under Apps/Eagle Dynamics 2: Unplug all usb devices and then plug in your controllers indifferent usb ports, just mix them up from what they were. windows will assign them a new identifier, You may have to rebind the controls. But should work. 3: Last resort but do a full clean reinstall. making sure to delete the folders in your documents and saved games folders as well as the games root folder. Hope that helps
  9. Ok so the parameters have changed from first to second image. First Image: Target Range 60nm 6bar scan 20 degree azimuth Second Image: Target Range 50nm 4 bar scan 40 degree azimuth. It all looks good to me I'll let you do the math but the AZ/EL box looks correct.
  10. Switch is on the left side, far back near the top left corner. Above the OBOGS switch, if that helps
  11. I did some testing myself as I havent used the new voice chat system, and it appears that some servers have Voice Chat turned off. I started my own server, enabled voice chat and the window appears fine. Turn off voice chat in the server settings and it wont appear. So its down to the person running the server you are using. If they have Voice Chat disabled then old time SRS would be an option.
  12. Thanks I'll look into that when I get home from work
  13. To be honest the IHADSS looks ok in the image but with the headset on it seems a lot bigger, ie the full width of the top cockpit bar. I am using a Reverb G2 v2. It just feels a lot larger than the A10CII or the F18 for example. Also isn't the pitch ladder supposed to be fixed to the horizon? Mine move with my head movement? Although I may have missed something
  14. As a side note here, I had a similar issue with George not firing, turned out that I had to jump in the from seat (CPG) and turn the laser on myself (WPN>UTIL>LASER), once I did this then I havent had any issues getting him to fire.
  15. After watching a few videos in pancake mode, I am noticing that the IHADSS display seems to appear small on a monitor rather than in VR. Also in VR I feel the size of the field of view that IHADSS covers is relatively large and that the CPG George Target list is too faint?
  16. The problem now is that you can only use the hand controller buttons if you enable the hand controllers in the VR options menu. I used to use mine to re center my view point , but use the mouse for all the cockpit clickable items. Now the hand controllers don't allow that. I also cannot assign the hand controller buttons to a function, not sure why?
  17. OK ED take my money already!!! Done and Done!!!
  18. I did a clean install of my Beta version and so far all is working fine. Not sure why my joysticks ended up not working properly.
  19. So I tried this in my Alpha version and the POV worked fine for assigning it to the Jester Menu. I have reinstalled my Beta from scratch and will test it again. I then loaded up the alpha and now the button stopped working. Looks more like a DCS bug rather than an F14 bug.
  20. Hi, I recently came back to the F14 and want to bind the POV hat on the right throttle to activate the Jester AI Menu. It shows I have set it in the controls menu but doesn't work in game. If I press A on the keyboard it works fine, but I want to bind it to the throttle?
  21. Yes it is Spring Tension. I did check out your video and I don't see anything that I am not doing already. I'll give it another go, or wait for an update.
  22. Problem 1) So I pickup the troops at Shpora, but my wingman doesnt always land. If he does he shuts down his engine and eventually gets airborne but is about 15km behind the flight. Problem 2) We do the 2 fake landings, and leads wingman drops off his troops ok. We get to the drop zone for my troops and even though I am behind the flight lead, as close as I dare. I get told "I have lost contact with the flight" and the mission fails. Very annoying to spend this much time flying to a target zone or mission area, for the AI to keep messing things up!!! Any tips greatly appreciated!
  23. First off, correction it is Mission 16!!. The problem is a general DCS bug with the NVGs when there is no Moon. To fix this I loaded the mission in the Mission Editor and changed the date to 28th April (same as mission 13). Saved it, and flew it with no issues. Hopefully they get this fixed soon. Hope that helps someone down the road!!
  24. Glad I found this thread. I am having the same issue with the Mi8. In the Spring Tension Campaign I was ok at night in Mission 13. But Mission 16 with the NVGs on I couldnt see any terrain. I changed the date to the same as Mission 13 and now all is good. Guess it is a Moon light issue, but then the NVG should be able to see regardless.
  25. Not sure if this is mission 16 or 17. But I did one mission with NVGs with no issues. This time whether the NVG gain is high or low, you cannot see any terrain. Is this a bug or am I missing something?
×
×
  • Create New...