DMouse

Well since the update my AB9 keeps crashing even after a new clean install of DCS!! Just tested in MSFS to make sure the new MOZA software and firmware perform ok and not a hint of a crash or glitch. Even though DCS now runs, and I mange to start a mission, ie Spitfire Cold and Dark, and I taxi out and take off, the MOZA software will crash soon after. Not sure whether there is a fix I can do or just wait for MOZA and/or DCS to come up with a fix.

Must admit I am now having major issues getting DCS to run at all!!! Currently doing a full clean install, a little extreme but haven't done that in a long time. Not sure if the MOZA Cockpit software or the firmware update is the cause, yet!!

The new Moza Cockpit Software is now Version 1.0.1.19, and the new AB9 firmware version is 1.1.1.27 Hopefully this will fix a few issues I was having!!! BTW flew the Spitfire for the first time with the AB9 and it was awesome!!!

Software and Firmware already updated. After trying a few different USB ports it is working but no FFB and Trimming has no effect even though I tried remapping the buttons and switching it to Buttons instead of D PAD in the MOZA software. Anyone have a similar experience? Thoughts on fixes? Any help is appreciated

Mine arrived yesterday (Sept 12th). I ordered on August 16th. Having some issues getting it to work in DCS, game keeps crashing. Do we need a MOZA tab for this stick?

Got a text message from DHL saying I have a parcel inbound. But when I check my order on my Moza account it is still marked as Processing. I did think the DHL message was just SPAM but it turns out I do have a package inbound and I am not expecting anything else. Looks like the MOZA website isn't updating the shipping status. Also the shipping company was in Honk Kong and is called JACKMAX Co. Limited. Expecting delivery on Friday the 13th? Fingers crossed!!!

I have noticed that the MOZA website now says orders will ship within 10 business days after being placed. So existing orders are starting to get shipped in the next week or two? Any thoughts anyone?

According to Chucks F18 guide the max weight is 33,000 lbs. This can be checked on the SUPT CHKLST page, A/C WT. Make sure to jettison fuel tanks and stores until below that weight and try again. Personally I have never had a landing gear issue with the Hornet. Hope that Helps, good luck

Go to windows setting>Mixed reality>Environment. Then try clear environment data. This can help with head position jumping around. Also you can try a reset as well and re do the rooom boundary if you use that. Hope that helps

Hey Lawndart, I am looking to get back into to some online play. I was previously a member aka PBSmooth, used to fly the A10C. Any chance of an invite, my discord user name is DMouseCA007 Cheers Paul

Apologies if I missed this. But is there an indicator that shows the current speed brake position, or on/off light? Searched the manual and can't find anything in the plane? Thanks

One of the Razbam Team (Galinette) has been posting a few videos of the LANTIRN I believe, on the Razbam DISCORD channel https://discord.com/channels/536389125276827660/544231925263630336/1106243145554997419

Ok so just ran it again. Looks like on initial departure even though I am supposed to call on Strike, they are actually on Comm1 Channel 1. Also for marshal on return the frequency doesn't match. I have also noticed that the Comm 1 and Comm 2 Kneeboard freqs for Marshall also don't match. I managed to finish the mission, but a little frustrating.

So i get the comms check in on startup, but nothing after that. I get the text messages for Chaff/Flare and Fence In, but no voice at all. I have checked I am on the correct frequency and that all appears ok. Thanks in advance for any input!!

As for the mixed movements, that is because DCS will assign axis to the rudder for both elevator and ailerons, make sure to delete those. Also check to see if your trim switch has been assigned to the views, you may also want to delete all of those as well. After that try the options below, good luck! If deleting the config folder doesn't work there are three other options. 1: Do a repair, which should be easy to find under Apps/Eagle Dynamics 2: Unplug all usb devices and then plug in your controllers indifferent usb ports, just mix them up from what they were. windows will assign them a new identifier, You may have to rebind the controls. But should work. 3: Last resort but do a full clean reinstall. making sure to delete the folders in your documents and saved games folders as well as the games root folder. Hope that helps

Ok so the parameters have changed from first to second image. First Image: Target Range 60nm 6bar scan 20 degree azimuth Second Image: Target Range 50nm 4 bar scan 40 degree azimuth. It all looks good to me I'll let you do the math but the AZ/EL box looks correct.

Switch is on the left side, far back near the top left corner. Above the OBOGS switch, if that helps

I did some testing myself as I havent used the new voice chat system, and it appears that some servers have Voice Chat turned off. I started my own server, enabled voice chat and the window appears fine. Turn off voice chat in the server settings and it wont appear. So its down to the person running the server you are using. If they have Voice Chat disabled then old time SRS would be an option.

Thanks I'll look into that when I get home from work

To be honest the IHADSS looks ok in the image but with the headset on it seems a lot bigger, ie the full width of the top cockpit bar. I am using a Reverb G2 v2. It just feels a lot larger than the A10CII or the F18 for example. Also isn't the pitch ladder supposed to be fixed to the horizon? Mine move with my head movement? Although I may have missed something

As a side note here, I had a similar issue with George not firing, turned out that I had to jump in the from seat (CPG) and turn the laser on myself (WPN>UTIL>LASER), once I did this then I havent had any issues getting him to fire.

After watching a few videos in pancake mode, I am noticing that the IHADSS display seems to appear small on a monitor rather than in VR. Also in VR I feel the size of the field of view that IHADSS covers is relatively large and that the CPG George Target list is too faint?

The problem now is that you can only use the hand controller buttons if you enable the hand controllers in the VR options menu. I used to use mine to re center my view point , but use the mouse for all the cockpit clickable items. Now the hand controllers don't allow that. I also cannot assign the hand controller buttons to a function, not sure why?

OK ED take my money already!!! Done and Done!!!

I did a clean install of my Beta version and so far all is working fine. Not sure why my joysticks ended up not working properly.