theropod Posted March 31, 2015 Posted March 31, 2015 can i use saitek cyborg evo force and logitech g940 mix with dcs world? my g940 josytick hat switch broken and i installed saitek cyborg evo force but when i try to enter options menu dcs stops working. is there any way to combine both controller?
hannibal Posted March 31, 2015 Posted March 31, 2015 ppjoyjoy.. find me on steam! username: Hannibal_A101A http://steamcommunity.com/profiles/76561197969447179
cichlidfan Posted March 31, 2015 Posted March 31, 2015 DCS should see both of them separately, just fine. ASUS ROG Maximus VIII Hero, i7-6700K, Noctua NH-D14 Cooler, Crucial 32GB DDR4 2133, Samsung 950 Pro NVMe 256GB, Samsung EVO 250GB & 500GB SSD, 2TB Caviar Black, Zotac GTX 1080 AMP! Extreme 8GB, Corsair HX1000i, Phillips BDM4065UC 40" 4k monitor, VX2258 TouchScreen, TIR 5 w/ProClip, TM Warthog, VKB Gladiator Pro, Saitek X56, et. al., MFG Crosswind Pedals #1199, VolairSim Pit, Rift CV1 :thumbup:
theropod Posted March 31, 2015 Author Posted March 31, 2015 ppjoyjoy.. i'll try it, thank you! DCS should see both of them separately, just fine. i realized the same but results no:( it says, dcs stop working
cichlidfan Posted March 31, 2015 Posted March 31, 2015 Try renaming your Saved Games\DCS folder. ASUS ROG Maximus VIII Hero, i7-6700K, Noctua NH-D14 Cooler, Crucial 32GB DDR4 2133, Samsung 950 Pro NVMe 256GB, Samsung EVO 250GB & 500GB SSD, 2TB Caviar Black, Zotac GTX 1080 AMP! Extreme 8GB, Corsair HX1000i, Phillips BDM4065UC 40" 4k monitor, VX2258 TouchScreen, TIR 5 w/ProClip, TM Warthog, VKB Gladiator Pro, Saitek X56, et. al., MFG Crosswind Pedals #1199, VolairSim Pit, Rift CV1 :thumbup:
theropod Posted March 31, 2015 Author Posted March 31, 2015 Try renaming your Saved Games\DCS folder. thank you cichlidfan,i have just tried but same results again:(
cichlidfan Posted March 31, 2015 Posted March 31, 2015 Does Windows see both controllers correctly? ASUS ROG Maximus VIII Hero, i7-6700K, Noctua NH-D14 Cooler, Crucial 32GB DDR4 2133, Samsung 950 Pro NVMe 256GB, Samsung EVO 250GB & 500GB SSD, 2TB Caviar Black, Zotac GTX 1080 AMP! Extreme 8GB, Corsair HX1000i, Phillips BDM4065UC 40" 4k monitor, VX2258 TouchScreen, TIR 5 w/ProClip, TM Warthog, VKB Gladiator Pro, Saitek X56, et. al., MFG Crosswind Pedals #1199, VolairSim Pit, Rift CV1 :thumbup:
theropod Posted March 31, 2015 Author Posted March 31, 2015 (edited) yes! there is no problem on installations and configurations. note:the worse thing is ,there is only dcs World to test it:( i had uninstalled p3d,fsx. Edited March 31, 2015 by theropod
cichlidfan Posted March 31, 2015 Posted March 31, 2015 Shot it the dark, but you could try to run a repair on DCS and use a clean Saved Games folder. ASUS ROG Maximus VIII Hero, i7-6700K, Noctua NH-D14 Cooler, Crucial 32GB DDR4 2133, Samsung 950 Pro NVMe 256GB, Samsung EVO 250GB & 500GB SSD, 2TB Caviar Black, Zotac GTX 1080 AMP! Extreme 8GB, Corsair HX1000i, Phillips BDM4065UC 40" 4k monitor, VX2258 TouchScreen, TIR 5 w/ProClip, TM Warthog, VKB Gladiator Pro, Saitek X56, et. al., MFG Crosswind Pedals #1199, VolairSim Pit, Rift CV1 :thumbup:
joey45 Posted March 31, 2015 Posted March 31, 2015 Should be fine. I use the HOTAS Warthog and my G940 peddles plus my Logitech F710. The only way to make sense out of change is to plunge into it, move with it, and join the dance. "Me, the 13th Duke of Wybourne, here on the ED forums at 3 'o' clock in the morning, with my reputation. Are they mad.." https://ko-fi.com/joey45
slowhand Posted March 31, 2015 Posted March 31, 2015 (edited) Strange I ran my g940 throttle and rudder with my cougar stick(940 stick trouble) just had to keep the g940 stick plugged in, Cus the other two run off it..Did you leave your G940 stick connected? Edited March 31, 2015 by slowhand [sIGPIC][/sIGPIC] SMOKE'M:smoke: IF YA GOT'M!:gun_rifle: H2o Cooler I7 9700k GA 390x MB Win 10 pro Evga RTX 2070 8Gig DD5 32 Gig Corsair Vengence, 2T SSD. TM.Warthog:joystick: :punk:, CV-1:matrix:,3x23" monitors, Tm MFD's, Saitek pro rudders wrapped up in 2 sheets of plywood:megalol:
theropod Posted March 31, 2015 Author Posted March 31, 2015 Strange I ran my g940 throttle and rudder with my cougar stick(940 stick trouble) just had to keep the g940 stick plugged Cus the other two run off it..Did you leave your G940 stick connected? yes both saitek and g940 connected.
slowhand Posted March 31, 2015 Posted March 31, 2015 Does it hang up when you remove the other stick? [sIGPIC][/sIGPIC] SMOKE'M:smoke: IF YA GOT'M!:gun_rifle: H2o Cooler I7 9700k GA 390x MB Win 10 pro Evga RTX 2070 8Gig DD5 32 Gig Corsair Vengence, 2T SSD. TM.Warthog:joystick: :punk:, CV-1:matrix:,3x23" monitors, Tm MFD's, Saitek pro rudders wrapped up in 2 sheets of plywood:megalol:
theropod Posted March 31, 2015 Author Posted March 31, 2015 (edited) Does it hang up when you remove the other stick? i missunderstood on my first reply, sorry:) yes. Edited March 31, 2015 by theropod
uboats Posted March 31, 2015 Posted March 31, 2015 (edited) that's really weird. it works completely fine on my machine: x52 + ch Edited March 31, 2015 by uboats [sIGPIC][/sIGPIC] My DCS Mods, Skins, Utilities and Scripts | Windows 10 | i7-4790K | GTX 980Ti Hybrid | 32GB RAM | 3TB SSD | | TM Warthog Stick | CH Pro Throttle + Pro Pedal | TIR5 Pro | TM MFD Cougar | Gun Camera: PrtScn |
Flagrum Posted March 31, 2015 Posted March 31, 2015 I think, that Saitek stick generally has some issues with DCS. I never bothered too much as I do not own such a device, but iirc there are several threads regarding some issues. Maybe you find a solution there if you use the search function.
theropod Posted March 31, 2015 Author Posted March 31, 2015 too weird! i have just uninstalled both joysticks and tried to install evo force alone but results are same! dcs stops working and ctd:( cyborg evo force is not working with dcs world.
theropod Posted March 31, 2015 Author Posted March 31, 2015 i guess cyborg evo force ctd is known problem and that problem belongs to saitek:mad: i cleaned saitek registry files as recommended but that doesnt helped again friends,thank you for all your interest
SkateZilla Posted March 31, 2015 Posted March 31, 2015 What devices are you trying to use? Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs
theropod Posted March 31, 2015 Author Posted March 31, 2015 What devices are you trying to use? logitech g940 pedals and throttles with saitek cyborg evo force. but i noticed that ,there is a known cyborg evo force ctd problem with dcs world. i read the older posts on dcs forum and couldnt find a fix:(
FoReIgNeR Posted April 1, 2015 Posted April 1, 2015 Check here for the solution to the saitek evo force problems: http://forums.eagle.ru/showthread.php?p=2307010 [sIGPIC][/sIGPIC] Limitless Aerobatics Team Facebook
Recommended Posts