jean.francois Posted May 24, 2023 Posted May 24, 2023 SimShaker for Aviators not work for me with DCS beta Multi Threading. Works fine in DCS official release. And for you ?
jean.francois Posted May 24, 2023 Posted May 24, 2023 Another question, i'm using a 2dof motion sim with Simtools ; in FS2020 both Simtools + Simshaker work fine simultaneously. In DSC only simtools works. As Simshaker, Simtools use Export.lua in \DCS\scripts.... Is there a conflict ? If i make a "DCS Repair", Simshaker work but no more Simtools...
Bazz_Mulder Posted May 24, 2023 Posted May 24, 2023 (edited) Its working for me in beta MT Edited May 25, 2023 by Bazz_Mulder Kowalsky - "Fox 3" simply means that you have commitment issues
AeriaGloria Posted May 24, 2023 Posted May 24, 2023 9 hours ago, Ala12Rv-Tundra said: That's a tricky question, maybe it's not programmed like that, but the current and specific vibrators you have are not at their best, some of them may need at certain amount of current to begin spinning or are unable to spin slowly. Also did you test the threshold vale for g load? Yes setting threshold/dead zone works perfect and doing the testing my motors seem able to work fine at low speeds. Maybe something else. I might just put an extra pad on it so it doesn’t shake me to death Black Shark Den Squadron Member: We are open to new recruits, click here to check us out or apply to join! https://blacksharkden.com
jean.francois Posted May 26, 2023 Posted May 26, 2023 (edited) On 5/24/2023 at 4:00 PM, Bazz_Mulder said: Its working for me in beta MT Steam version of Dcs MT ? Edited May 26, 2023 by jean.francois
Bazz_Mulder Posted May 26, 2023 Posted May 26, 2023 11 hours ago, jean.francois said: Steam version of Dcs MT ? Yes, Steam Open Beta MT current version Kowalsky - "Fox 3" simply means that you have commitment issues
Snacko Posted May 29, 2023 Posted May 29, 2023 Flying the F18.. I have been able to test and adjust the vibration strength for all of the effects on the F/A-18, except for the following: Failure and Damage - tested by allowing myself to be shot up in a dogfight. Also set to 100 with 0 vibrations. High Speed Shudders - tested at 100 flying 600-700kts with 0 vibration AFAICT.. Seat Ejection - tested at 100 on the ground, and in the air, with 0 vibration. Wheel Blocking/Skidding - tested by moving fast and holding the brakes and turning left/right... Spinning around on the runway and ground. I get no Vibration for these 4 effects, even with their strength set to 100. Can anyone confirm this, or are these working for you?? 1 Snack Officer Intel I9-10850K (OC @ 5.0ghz) │ 64GB (4x16GB) DDR4 3200 │Gigabyte RTX 4090 Gaming OC 24gb - ҉ - Blackshark Cockpit Trainer - ҉ - ♣ Thread | ♥ Download
Lekaa Posted June 4, 2023 Posted June 4, 2023 Hello, first week of owning Jetpad, when using it with various planes, sometimes the pad keeps vibrating after the effect have ended, and flying straight, the only thing i can do is to click to click on restart, anything that i'm doing wrong? the logs have a message saying send stop vibe but it doesn't stop.
=Andre= Posted June 4, 2023 Posted June 4, 2023 2 minutes ago, Lekaa said: Hello, first week of owning Jetpad, when using it with various planes, sometimes the pad keeps vibrating after the effect have ended, and flying straight, the only thing i can do is to click to click on restart, anything that i'm doing wrong? the logs have a message saying send stop vibe but it doesn't stop. What kind of the restart? Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC]
Lekaa Posted June 4, 2023 Posted June 4, 2023 34 minutes ago, =Andre= said: What kind of the restart? null
Sn8ke Posted June 4, 2023 Posted June 4, 2023 Anyone have a good balance of effect settings for the A-10C II? Using Buttkicker Gamer Pro. Asus Prime Gaming Wifi7 // Intel 14900K @5.5GHz // 64Gb DDR5 6000MHz // 3090 RTX // 4TB Samsung NVME M.2
Hammer1-1 Posted June 4, 2023 Posted June 4, 2023 Im hoping someone can answer this...is the audio jack really necessary to plug in? Wouldnt the USB port be enough to make this work? Curious because I have to contend with sound coming through the right speakers now. 1 Intel 13900k @ 5.8ghz | 64gb GSkill Trident Z | MSI z790 Meg ACE | Zotac RTX4090 | Asus 1000w psu | Slaw RX Viper 2 pedals | VPForce Rhino/VKB MCE Ultimate + STECS Mk2 MAX / Virpil MongoosT50+ MongoosT50CM | Virpil TCS+/ AH64D grip/custom AH64D TEDAC | Samsung Odyssey G9 + Odyssey Ark | Next Level Racing Flight Seat Pro | WinWing F-18 MIPS | No more VR for this pilot. My wallpaper and skins On today's episode of "Did You Know", Cessna Skyhawk crashes into cemetery; over 800 found dead as workers keep digging.
Bazz_Mulder Posted June 22, 2023 Posted June 22, 2023 Hello, How can we add F-15E to be recognizable? 3 Kowalsky - "Fox 3" simply means that you have commitment issues
Ala12Rv-Tundra Posted June 23, 2023 Posted June 23, 2023 5 hours ago, Bazz_Mulder said: Hello, How can we add F-15E to be recognizable? New modules are usually donated from the ssa community to the software creators 4 i5 8400 | 32 Gb RAM | RTX 2080Ti | Virpil Mongoose T-50 base w/ Warthog & Hornet sticks | Warthog throttle | Cougar throttle USB | Orion 2 throttle base w/ Viper & Hornet grips| VKB T-Rudder Mk IV | Oculus Rift S | Buddy-Fox A-10 UFC | 2x TM MFDs & 1x WW DDI | 2x Bass shakers | SIMple SIMpit chair | WW TakeOff panel | Andre JetSeat | WW Hornet UFC | WW Viper ICP FC3 - Warthog - F-5E - Harrier - NTTR - Hornet - Tomcat - Huey - Viper - C-101 - PG - Hip - SuperCarrier - Syria - Warthog II - Hind - South Atlantic - Sinai - Strike Eagle - Phantom - Mirage F1 - Afghanistan - Irak
lax22 Posted June 25, 2023 Posted June 25, 2023 How much SimShaker improves the immersion in DCS gets most obvious when you have to fly without it.... 7 System: 7800X3D / Asus RTX 4090 OC / 64GB 3600mhz / Pimax Crystal / VKB GF3 Ultimate
Hammer1-1 Posted June 25, 2023 Posted June 25, 2023 On 6/22/2023 at 10:45 PM, Ala12Rv-Tundra said: New modules are usually donated from the ssa community to the software creators Ive been wondering why it hasnt been working all day... Intel 13900k @ 5.8ghz | 64gb GSkill Trident Z | MSI z790 Meg ACE | Zotac RTX4090 | Asus 1000w psu | Slaw RX Viper 2 pedals | VPForce Rhino/VKB MCE Ultimate + STECS Mk2 MAX / Virpil MongoosT50+ MongoosT50CM | Virpil TCS+/ AH64D grip/custom AH64D TEDAC | Samsung Odyssey G9 + Odyssey Ark | Next Level Racing Flight Seat Pro | WinWing F-18 MIPS | No more VR for this pilot. My wallpaper and skins On today's episode of "Did You Know", Cessna Skyhawk crashes into cemetery; over 800 found dead as workers keep digging.
t-stoff Posted June 25, 2023 Posted June 25, 2023 (edited) Someone sent me this workaround on discord. Paste the content to the original file (back it up first) or just change the extension If I recall its the one on the savedgames / dcs / scripts correct me if I'm wrong EDIT: it seems that only the left pylons give rumble on release. SimShaker.lua.txt Edited June 25, 2023 by t-stoff 1 [sIGPIC][/sIGPIC] "The nation which forgets its defenders will be itself forgotten"
Gunfreak Posted June 25, 2023 Posted June 25, 2023 10 hours ago, lax22 said: How much SimShaker improves the immersion in DCS gets most obvious when you have to fly without it.... Yeah. My ass doesn't tell me if I dropped that GBU-24! i7 13700k @5.2ghz, GTX 5090 OC, 128Gig ram 4800mhz DDR5, M2 drive.
Hammer1-1 Posted June 25, 2023 Posted June 25, 2023 Ok so where would one find a bunch of custom shaker profiles at? Think the default ones are a bit too...vibby Intel 13900k @ 5.8ghz | 64gb GSkill Trident Z | MSI z790 Meg ACE | Zotac RTX4090 | Asus 1000w psu | Slaw RX Viper 2 pedals | VPForce Rhino/VKB MCE Ultimate + STECS Mk2 MAX / Virpil MongoosT50+ MongoosT50CM | Virpil TCS+/ AH64D grip/custom AH64D TEDAC | Samsung Odyssey G9 + Odyssey Ark | Next Level Racing Flight Seat Pro | WinWing F-18 MIPS | No more VR for this pilot. My wallpaper and skins On today's episode of "Did You Know", Cessna Skyhawk crashes into cemetery; over 800 found dead as workers keep digging.
lax22 Posted June 25, 2023 Posted June 25, 2023 10 hours ago, t-stoff said: Someone sent me this workaround on discord. Paste the content to the original file (back it up first) or just change the extension If I recall its the one on the savedgames / dcs / scripts correct me if I'm wrong EDIT: it seems that only the left pylons give rumble on release. SimShaker.lua.txt 28.46 kB · 16 downloads This file didn't work for me at all SimShaker still says that the F15 is not supported... System: 7800X3D / Asus RTX 4090 OC / 64GB 3600mhz / Pimax Crystal / VKB GF3 Ultimate
t-stoff Posted June 25, 2023 Posted June 25, 2023 2 hours ago, lax22 said: This file didn't work for me at all SimShaker still says that the F15 is not supported... is it in the right folder? that happened to me on my first try. nevertheless its just "barely" working, so we better wait for the official update [sIGPIC][/sIGPIC] "The nation which forgets its defenders will be itself forgotten"
Ala12Rv-Tundra Posted June 25, 2023 Posted June 25, 2023 4 hours ago, Hammer1-1 said: Ok so where would one find a bunch of custom shaker profiles at? Think the default ones are a bit too...vibby Most likely engine effect at 50%. Ground roll is usually intense too. Things like flaps for Viper or wing rotation for Tomcat might be tone down because they work a lot in flight. i5 8400 | 32 Gb RAM | RTX 2080Ti | Virpil Mongoose T-50 base w/ Warthog & Hornet sticks | Warthog throttle | Cougar throttle USB | Orion 2 throttle base w/ Viper & Hornet grips| VKB T-Rudder Mk IV | Oculus Rift S | Buddy-Fox A-10 UFC | 2x TM MFDs & 1x WW DDI | 2x Bass shakers | SIMple SIMpit chair | WW TakeOff panel | Andre JetSeat | WW Hornet UFC | WW Viper ICP FC3 - Warthog - F-5E - Harrier - NTTR - Hornet - Tomcat - Huey - Viper - C-101 - PG - Hip - SuperCarrier - Syria - Warthog II - Hind - South Atlantic - Sinai - Strike Eagle - Phantom - Mirage F1 - Afghanistan - Irak
FoxTwo Posted June 25, 2023 Posted June 25, 2023 4 hours ago, lax22 said: This file didn't work for me at all SimShaker still says that the F15 is not supported... You have to replace the simshaker.lua in the install folder (C:\Program Files (x86)\SimShaker\SimShaker for Aviators\Data) The one in savedgames should get overwritten by it on launch. If not replace that one too.
Bazz_Mulder Posted June 26, 2023 Posted June 26, 2023 (edited) Update with F-15E is live, thanks f4l0! https://github.com/SimShaker-for-Aviators/SimShaker-for-Aviators-Releases/releases/tag/beta-2.6.6 Edited June 26, 2023 by Bazz_Mulder 2 6 Kowalsky - "Fox 3" simply means that you have commitment issues
Recommended Posts