edmuss Posted June 13, 2024 Posted June 13, 2024 5 hours ago, f4l0 said: Kiowa support will be available on the weekend Awesome, thank you so much for your work 2 Ryzen7 7800X3D / RTX3080ti / 64GB DDR5 4800 / Varjo Aero / Leap Motion / Kinect Headtracking TM 28" Warthog Deltasim Hotas / DIY Pendular Rudders / DIY Cyclic Maglock Trimmer / DIY Abris / TM TX 599 evo wheel / TM T3PA pro / DIY 7+1+Sequential Shifter / DIY Handbrake / Cobra Clubman Seat Shoehorned into a 43" x 43" cupboard.
tomeye Posted June 14, 2024 Posted June 14, 2024 14 hours ago, f4l0 said: If you use whirl and G effect, SSA increases/decreases the strength of the effect depending on the g force... Kiowa support will be available on the weekend Thanks for that! I had an idea, have you considered an option on the GUI to allow addition or duplication of existing to a custom named aicraft/heli? This could help with mods or interim time between updates.
TFS Posted June 14, 2024 Posted June 14, 2024 Is there a guide I missed to explain in detail what each category is and what is translated to what action in the game?
edmuss Posted June 15, 2024 Posted June 15, 2024 All of the effects are named as to what they represent, it's fairly self explanatory. It might take a while to learn which effects are triggered with which flight condition, it might help to turn other effects down in order to isolate a specific one to understand what's happening. Using the effects monitor can help with this as well Ryzen7 7800X3D / RTX3080ti / 64GB DDR5 4800 / Varjo Aero / Leap Motion / Kinect Headtracking TM 28" Warthog Deltasim Hotas / DIY Pendular Rudders / DIY Cyclic Maglock Trimmer / DIY Abris / TM TX 599 evo wheel / TM T3PA pro / DIY 7+1+Sequential Shifter / DIY Handbrake / Cobra Clubman Seat Shoehorned into a 43" x 43" cupboard.
ZACHI Posted June 15, 2024 Posted June 15, 2024 Hello guys, very new here as I just got my new NLR HF8. I've downloaded SSA, set it to ForceFeel (and while DCS is running I see ForceFeel Seat State: OK) but no effects when flying... Any guidance would be highly appreciated. Also, I see in the effect settings tab that there are only Generic models; if any specific module profiles are needed/available I'll be happy to get one for the F16. Thanks!
=Andre= Posted June 15, 2024 Posted June 15, 2024 42 minutes ago, ZACHI said: Hello guys, very new here as I just got my new NLR HF8. I've downloaded SSA, set it to ForceFeel (and while DCS is running I see ForceFeel Seat State: OK) but no effects when flying... Any guidance would be highly appreciated. Also, I see in the effect settings tab that there are only Generic models; if any specific module profiles are needed/available I'll be happy to get one for the F16. Thanks! Hi, Please check if you can see any numbers in the SimShaker for Aviators -> View -> DCS Debug window during the mission. Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC]
ZACHI Posted June 15, 2024 Posted June 15, 2024 Hi Andre, There is nothing in the Debug view. But, I found out that I'm getting an error - see attached. I tried to uninstall, restart, and re-install SSA and I'm still getting this error. Do I need to have the NLR HF8 software installed for the SSA to work? Thanks!
=Andre= Posted June 15, 2024 Posted June 15, 2024 (edited) 20 minutes ago, ZACHI said: Hi Andre, There is nothing in the Debug view. But, I found out that I'm getting an error - see attached. I tried to uninstall, restart, and re-install SSA and I'm still getting this error. Do I need to have the NLR HF8 software installed for the SSA to work? Thanks! No, it will most likely bring a conflict you will have to resolve. This error looks unfamiliar. It's rather in @f4l0 scope as SimShaker for Aviators developer. Edited June 15, 2024 by =Andre= Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC]
ZACHI Posted June 16, 2024 Posted June 16, 2024 (edited) 15 hours ago, =Andre= said: No, it will most likely bring a conflict you will have to resolve. This error looks unfamiliar. It's rather in @f4l0 scope as SimShaker for Aviators developer. Thanks @=Andre= @f4l0 any insight or suggestions here? For the time being, tried to uninstall and reinstall again, including the Beta version but I'm getting the same result... Edited June 16, 2024 by ZACHI
ZACHI Posted June 16, 2024 Posted June 16, 2024 7 hours ago, ZACHI said: Thanks @=Andre= @f4l0 any insight or suggestions here? For the time being, tried to uninstall and reinstall again, including the Beta version but I'm getting the same result... UPDATE: I managed to fix the issue! After reading through many forum pages here, I found a reference to the Scripts folder under Saved Games. I uninstalled SSA again and cleaned the Script folder from SSA and NLR leftovers. After a fresh install, SSA works with DCS! I mostly fly the F16 - do I need to change any effect settings, or anyone has a recommendation? 2
f4l0 Posted June 19, 2024 Author Posted June 19, 2024 Beta 2.7.12 is available. I just noticed that the version checker which checks if a newer version is available sometimes fails. This beta release should fix this issue... So please get the latest beta from the website: SimShaker for Aviators (simshaker-for-aviators.github.io) 4 4 f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums SimShaker for Aviators (simshaker-for-aviators.github.io)
edmuss Posted June 20, 2024 Posted June 20, 2024 So much better being able to feel what the Kiowa is doing now, thanks for your work @f4l0 3 Ryzen7 7800X3D / RTX3080ti / 64GB DDR5 4800 / Varjo Aero / Leap Motion / Kinect Headtracking TM 28" Warthog Deltasim Hotas / DIY Pendular Rudders / DIY Cyclic Maglock Trimmer / DIY Abris / TM TX 599 evo wheel / TM T3PA pro / DIY 7+1+Sequential Shifter / DIY Handbrake / Cobra Clubman Seat Shoehorned into a 43" x 43" cupboard.
westr Posted June 20, 2024 Posted June 20, 2024 Is it possible to set a turbulence effect when flying into cloud with simshaker? 1 RYZEN 7 3700X Running at 4.35 GHz NVIDIA GeForce GTX 1080Ti 32gb DDR4 RAM @3200 MHz Oculus CV1 NvME 970 EVO TM Warthog Stick & Throttle plus 11" extension. VKB T-Rudder MKIV
jww123 Posted June 22, 2024 Posted June 22, 2024 (edited) Could someone answer a few questions re SSA and DCS OH-58d Please? I just set up an NLR HF8, using SSA beta 2.7.12, latest DCS build. DCS is installed on D:\\ drive not the default C:\ drive, Saved game is installed on C:\ drive. I am getting some vibration through the HF8 but I wonder if I am missing some effects. I get vibration when on ground but after lifting off I don't get any vibrations until I am at risk for vortex ring state. When I increase pitch with the cyclic I hear the change in tone as the rotor blades bite but no vibration. As I accelerate or decelerate through ETL the cockpit shudders in game but no vibration from the HF8. If I come in hard triggering the airbags no vibration. If I crash no vibrations. As I land maybe, a slight vibration but not as much as I would have thought. Does this sound like I am seeing what's there to see (feel) or am I missing some vibration effects? Some problem with my configuration of SSA? Problems with my HF8 installation? Any help will be greatly appreciated!! If I select Realteus in the SSA software I get no vibration at all in game though testing the vibration in the settings software I get vibrations throught the HF8. I get more vibration in game if I leave it set to Gametrix. No matter what I do after flying missions I never can select the aircraft type. It remains showing only the generic aircraft types. ISSUE RESOLVED- I had copies of old DCS World in the saved game folder where my active DCS saved game folder was. I removed these copies of DCS. Log file showed SS4A was reading all copies of DCS. This helped but didn't solve all the issues. I uninstalled SS4A and all script files it had created (they persist in saved game script file after uninstall). I had installed HF8 software initially then uninstalled it when I couldn't get SS4A to work. It too, left orphan files in the saved game script folder. I removed that file, I ran DCS world repair then reinstalled SS4A. After doing those steps SS4A worked as it should. It is now setting up specifications for each aircraft as it is flown. Must have been some conflict Edited June 24, 2024 by jww123 added addnl info. 1
f4l0 Posted June 24, 2024 Author Posted June 24, 2024 On 6/21/2024 at 1:02 AM, westr said: Is it possible to set a turbulence effect when flying into cloud with simshaker? SSA uses the data DCS provides. It calculates turbulence depending on g force and wind data. I'm not sure if in DCS the plane reacts to clouds... 1 f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums SimShaker for Aviators (simshaker-for-aviators.github.io)
Hiob Posted June 24, 2024 Posted June 24, 2024 1 hour ago, f4l0 said: SSA uses the data DCS provides. It calculates turbulence depending on g force and wind data. I'm not sure if in DCS the plane reacts to clouds... I‘m rather sure it doesn’t. Clouds are just cosmetic so far afaik. 1 "Muß ich denn jedes Mal, wenn ich sauge oder saugblase den Schlauchstecker in die Schlauchnut schieben?"
jgreg Posted June 27, 2024 Posted June 27, 2024 @f4l0 Thankyou for the Kiowa support. All seems to be working well, except for having no 'Touchdown' effect, which is the same for the Gazelle. Would it be possible to add this? Maybe @Polychop Simulations could help? I can provide a track if required. I posted a Gazelle track a couple of pages back. Many thanks! 1
_JMax Posted June 27, 2024 Posted June 27, 2024 I am stumped trying to get SimShaker working for DCS. SimShaker Sound Module installed.SimShaker for Aviators installed. At first,the gui for SoundModule came up and my shakers tested correctly. Tried in DCS,but no effects. Tried to re-open SoundModule,but it wont re-open. Just a quick flash in the taskbar.R e-installed to no avail.Checked firewall and anti-virus-no difference. Intel I7 13700KF 48GB DDR4 GeForce 4070 Ti 2x1000GB SSD Quest 3 MSI 3440x1440@100hz. VKB Stecs VKB Gladiator EVO G502
Tzigy Posted June 27, 2024 Posted June 27, 2024 Recently my Shaker stopped working as well, what fixed it was to download and re-install the latest version of the Sound Module... TM Warthog MFG TIR5 GT Omega Pro/ButKickerx1/WheelStandPro Playseat/ButKickerx2
_JMax Posted June 28, 2024 Posted June 28, 2024 I uninstalled and re-installed both,and unfortunately have the same problem still..... Intel I7 13700KF 48GB DDR4 GeForce 4070 Ti 2x1000GB SSD Quest 3 MSI 3440x1440@100hz. VKB Stecs VKB Gladiator EVO G502
TFS Posted June 28, 2024 Posted June 28, 2024 I recently ran into an issue where my bass shakers essentially disconnect and I hear windows thought my bass shakers say "pc mode". I specially if I alt tab out of the game for a second. I can't get my bass shakers to reconnect unless I am in an aircraft and manually close and reopen ssa with sound module. The issue is solely the sound module, my seat never disconnects. Anyone else have any ideas?
hannibal Posted July 1, 2024 Posted July 1, 2024 On 6/19/2024 at 2:10 AM, f4l0 said: Beta 2.7.12 is available. I just noticed that the version checker which checks if a newer version is available sometimes fails. This beta release should fix this issue... So please get the latest beta from the website: SimShaker for Aviators (simshaker-for-aviators.github.io) i was wondering when simshaker support was coming for kiowa. i guess there was an unannounced update! going to look for update! find me on steam! username: Hannibal_A101A http://steamcommunity.com/profiles/76561197969447179
Dos Posted July 2, 2024 Posted July 2, 2024 I usually go to this link Releases · SimShaker-for-Aviators/SimShaker-for-Aviators-Releases (github.com) which is tied to the software and yes it is still on 2.7.9.0. So the software will not trigger an update needed, I guess.
f4l0 Posted July 3, 2024 Author Posted July 3, 2024 Kiowa is already available in the latest beta 2.17.12 you can get it here: https://simshaker-for-aviators.github.io/SimShaker-for-Aviators-Releases/ 1 1 f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums SimShaker for Aviators (simshaker-for-aviators.github.io)
=475FG= Dawger Posted July 4, 2024 Posted July 4, 2024 @f4l0 Is there any chance of getting Indicated Airspeed as an available effect with a special options slider to set the beginning airspeed for the effect (similar to the G feeling threshold)? My request is due to the poor simulation (non-existent) of wind rush noise in DCS. 600 knots IAS is loud IRL. Of course, it would be better to have wind noise sent to a sound effect but I will take a seat vibration as a substitute 2
Recommended Posts