Shimmergloom667 Posted March 28, 2019 Posted March 28, 2019 Can confirm having problems - I now have strange problems, too: - shut down DCS & VoiceAttack - started VA as admin, updated vaicom to 2.5.9.4, shut down VA, restarted VA -> 2.5.9.4 confirmed - downloaded and installed AI RIO dll according to manual - started VA, activated AI RIO license, did NOT YET enable AI RIO extension - started DCS -> several Categories of Keybindings in F-14 module missing (e.g. "Stick", "Throttle"), see attached screenshot - shutting down VA and repairing DCS brings back categories i7 - 9700K | 32 GB DDR4 3200 | RTX 2080 | VKB Gunfighter Mk II /w MCG Pro | Virpil T-50CM2 Throttle | TrackIR 5 | VKB Mk. IV AJS-37 | A/V-8B | A-10C | F-14A/B | F-16C | F-18C | F-86F | FC3 | JF-17 | Ka-50 | L-39 | Mi-8 | MiG-15bis | MiG-19 | MiG-21bis | M2000-C | P-51D | Spitfire LF Mk. IX | UH-1H
Mud Posted March 28, 2019 Posted March 28, 2019 I didn't loose all the keybinds but it messed up my Warthog joystick only control bindings for f-14, rest or the bindings are ok. Haven't tried repair or other modules yet. Same for me with the latest update of Vaicom. Going back to the Jester wheel for now. Spoiler W10-x64 | B650E Gigabyte Aorus Master | AMD Ryzen 7 7800X3D | Noctua NH-D15 G.Skill Trident ZS Neo DDR5-6000 64Gb | MSI RTX 3080ti Gaming X Asus Xonar AE | TM Hotas Warthog MFG Crosswind pedals | Valve Index
Shimmergloom667 Posted March 28, 2019 Posted March 28, 2019 After shutting down VoiceAttack and repairing DCS, the Input Categories are back. Turning Voice Attack back on also damages the input categories again. i7 - 9700K | 32 GB DDR4 3200 | RTX 2080 | VKB Gunfighter Mk II /w MCG Pro | Virpil T-50CM2 Throttle | TrackIR 5 | VKB Mk. IV AJS-37 | A/V-8B | A-10C | F-14A/B | F-16C | F-18C | F-86F | FC3 | JF-17 | Ka-50 | L-39 | Mi-8 | MiG-15bis | MiG-19 | MiG-21bis | M2000-C | P-51D | Spitfire LF Mk. IX | UH-1H
Aerovenator Posted March 28, 2019 Posted March 28, 2019 From the included Install Notes Notes On This Release: F-14 radio tuning is done using the regular plugin commands (Select). Thanks for your answer. I experienced two things: 1. I tried it with F-14 free flight mission on the Caucasus map with a „Texaco“ Tanker. And used „Texaco, select“. Got the message in VA that there is no Texaco present. Then I tried „Tanker, select“, but received the same message in VA. 2. According to the manual pages you mentioned with the select command the radio call is addressed to the specific entity, but without easy comms, tuning has to be done separately. So how is that with Jester working with easy comms off? Gesendet von iPhone mit Tapatalk I7-9700K -- 32GB RAM -- RTX 4070 -- Virpil T-50CM3 Throttle + WarBRD Base -- Thrustmaster TPR -- Quest 3
metzger Posted March 28, 2019 Posted March 28, 2019 Here are my default .lua config files for warthog joystick, before and after running voiceattack: https://my.pcloud.com/publink/show?code=kZ9HL67Z7NR1vPRyySkTb0eRjKJPFY7U6w27 [sIGPIC][/sIGPIC]
Harker Posted March 28, 2019 Posted March 28, 2019 Couple of questions regarding the AIRIO plugin, what is the command to select Datalink Host? And regarding the vaicom commands that have (show options), like TACAN mode - >(show options), is an option menu supposed to pop up? Because it doesn't. Thanks in advance! The vCVW-17 is looking for Hornet and Tomcat pilots and RIOs. Join the vCVW-17 Discord. F/A-18C, F-15E, AV-8B, F-16C, JF-17, A-10C/CII, M-2000C, F-14, AH-64D, BS2, UH-1H, P-51D, Sptifire, FC3 - i9-13900K, 64GB @6400MHz RAM, 4090 Strix OC, Samsung 990 Pro
Shimmergloom667 Posted March 28, 2019 Posted March 28, 2019 After a few restarts it seems to be running w/o issue on my X56, can confirm though that the Warthog of my aforementioned buddy suffers the same problem that metzger has. It is entirely reproducable: as soon as VoiceAttack runs, starting up DCS afterwards messes up Warthog bindings (vaicom 2.5.9.4, VA 1.7.3) i7 - 9700K | 32 GB DDR4 3200 | RTX 2080 | VKB Gunfighter Mk II /w MCG Pro | Virpil T-50CM2 Throttle | TrackIR 5 | VKB Mk. IV AJS-37 | A/V-8B | A-10C | F-14A/B | F-16C | F-18C | F-86F | FC3 | JF-17 | Ka-50 | L-39 | Mi-8 | MiG-15bis | MiG-19 | MiG-21bis | M2000-C | P-51D | Spitfire LF Mk. IX | UH-1H
Manhorne Posted March 28, 2019 Posted March 28, 2019 Ok.. So I installed the AIRIO.DLL file in the extensions folder and the message I get in the EX Tab is "AIRIO..DLL not Loaded". I have tried and installed it several times with the same message.Any Ideas??
Harker Posted March 28, 2019 Posted March 28, 2019 Ok.. So I installed the AIRIO.DLL file in the extensions folder and the message I get in the EX Tab is "AIRIO..DLL not Loaded". I have tried and installed it several times with the same message.Any Ideas??Did you activate it from the "About" tab? The vCVW-17 is looking for Hornet and Tomcat pilots and RIOs. Join the vCVW-17 Discord. F/A-18C, F-15E, AV-8B, F-16C, JF-17, A-10C/CII, M-2000C, F-14, AH-64D, BS2, UH-1H, P-51D, Sptifire, FC3 - i9-13900K, 64GB @6400MHz RAM, 4090 Strix OC, Samsung 990 Pro
Florida Posted March 28, 2019 Posted March 28, 2019 Just wanted to add that the updating of the keywords drove me up a wall. On my system at least, the entry box was blank, although I could see all the words when I moused over the field. It took me over an hour to realize that they were "invisible" and the delete and paste worked even though I couldn't see it. Why is that? -= Gary =- a.k.a. Florida - Current DCS Beta, A-10C II Warthog, F/A-18C Hornet, F-16, F-14B Tomcat, P-51D, Spitfire, Track IR, Logitech X-56 HOTAS, Logitech rudder pedals, Thrustmaster Cougar MFDs, Honeycomb Bravo Throttle Quadrant, CH Throttle Quadrant, Razer Orb Weaver, X-Box controller
Hollywood_315 Posted March 28, 2019 Author Posted March 28, 2019 Code snag was found: 2.5.9.5 hotfix is up. Thanks There is no spoon. VAICOM PRO plugin for DCS World www.vaicompro.com
lancerr Posted March 28, 2019 Posted March 28, 2019 (edited) @lancer that's a typo should be page 30 thanks @Oban You have some lua install problem, possibly other apps interfering Try check the 2 mins install fix here As a courtesy to kneeboard builders: attached is the reference tables in .docx format. Grtz Thanks Hollywood. Got past that one and then ran into the usual issue - F14B not being detected by Vaicom plugin on the PTT page. Deleted Export.lua and VAICOMPRO folders in both DCS and DCS.OpenBeta. REstarted VoiceAttack, Vaicom. Then started DCS. STill nothing. Edited March 28, 2019 by lancerr
Ala12Rv-Birdman Posted March 28, 2019 Posted March 28, 2019 Hi. Everything seemed to install properly, but no new keywords from AIRIO are recognized. Looked into the EDITOR TAB and the keywords are there. Clicked the TEST button and VA prompts "276 missing aliases in VA profile VAICOM PRO for DCS World." What am I missing? How can I load all those missing aliases into the profile? Thanks in advance for your support Spanish Ala12rv Pilot Nevada TTR // Persian Gulf // Syria // South Atlantic T.35C Tamiz // C-101 Mirlo // F-5E Tiger // FA-18C Hornet // Mirage F1 // EF2K!!! // F-14B Tomcat // F-16C Viper MSI.Z690 // i9-12900F 5.1GHz // RTX3090 24GB // DDR5 5600Mhz 64GB QuestPro // Hotas.Warthog // MFG.Crosswind // WW.Panels // TK.ICP // MFD.Cougar // Jetseat
Firebird1955 Posted March 28, 2019 Posted March 28, 2019 Go to the editor tab of the Viacom control panel (Lt CTL, Lt ALT, C) and see if the finish tab isnt orange. That is what I had to remember how to do. You have to update the profile just as you would with a new command phrase. Hopefully that helps System Specs: System Specs: MSI Tomahawk Z590 wifi, I9 11900K Processor, 64gb Corsair Vengance 3600mhz ram, 4070TI Video Card, Windows 11 Pro, 2 Samsung NVMe SSD (2tb and 1 tb), Valve Index VR system
chaser Posted March 28, 2019 Posted March 28, 2019 with the recent up date the dsc coms menu is in auto and keeps on popping up I can delete the export files but that only last once Keep binding are okay so its not that [sIGPIC][/sIGPIC]
Specter Posted March 28, 2019 Posted March 28, 2019 I've got the same issue with AIRIO.DLL not being loaded! i7-10700K @ 5Ghz | Asus Z490 Tuf Pro Gaming | RTX 3090 | 64 Gb RAM @3.6Ghz | 1TB Samsung 970 EVO+ SSD | 1TB addlink S70 M.2 SSD | 1TB Samsung 850 EVO | 4TB HDD | Reverb G2 | Thrustmaster Warthog HOTAS | Thrustmaster TPR rudder pedals | Thrustmaster Cougar MFDs
Manhorne Posted March 28, 2019 Posted March 28, 2019 Did you activate it from the "About" tab? Yes, I activated it and it says that it is activated in the software..
M.Muir Posted March 28, 2019 Posted March 28, 2019 Found a possible Bug. During voice training TACAN Sierra Tango November is missing from the Command Phrase list. Drove me up a wall the last half an hour trying to figure out why that command doesn't work.
Ala12Rv-Birdman Posted March 28, 2019 Posted March 28, 2019 Yeaaaa it worked perfect!!!! Now, let's take Jester for a ride!! Thanks a million!! Spanish Ala12rv Pilot Nevada TTR // Persian Gulf // Syria // South Atlantic T.35C Tamiz // C-101 Mirlo // F-5E Tiger // FA-18C Hornet // Mirage F1 // EF2K!!! // F-14B Tomcat // F-16C Viper MSI.Z690 // i9-12900F 5.1GHz // RTX3090 24GB // DDR5 5600Mhz 64GB QuestPro // Hotas.Warthog // MFG.Crosswind // WW.Panels // TK.ICP // MFD.Cougar // Jetseat
Ala12Rv-Birdman Posted March 28, 2019 Posted March 28, 2019 Opppsss No voice commands for INS alignment? What are the keywords for that? Or how can I make contextual menu appear to choose one alignment? Spanish Ala12rv Pilot Nevada TTR // Persian Gulf // Syria // South Atlantic T.35C Tamiz // C-101 Mirlo // F-5E Tiger // FA-18C Hornet // Mirage F1 // EF2K!!! // F-14B Tomcat // F-16C Viper MSI.Z690 // i9-12900F 5.1GHz // RTX3090 24GB // DDR5 5600Mhz 64GB QuestPro // Hotas.Warthog // MFG.Crosswind // WW.Panels // TK.ICP // MFD.Cougar // Jetseat
Specter Posted March 29, 2019 Posted March 29, 2019 I've got the same issue with AIRIO.DLL not being loaded! Sorted. Voice attack needed updating as well as Viacom. i7-10700K @ 5Ghz | Asus Z490 Tuf Pro Gaming | RTX 3090 | 64 Gb RAM @3.6Ghz | 1TB Samsung 970 EVO+ SSD | 1TB addlink S70 M.2 SSD | 1TB Samsung 850 EVO | 4TB HDD | Reverb G2 | Thrustmaster Warthog HOTAS | Thrustmaster TPR rudder pedals | Thrustmaster Cougar MFDs
Manhorne Posted March 29, 2019 Posted March 29, 2019 Sorted. Voice attack needed updating as well as Viacom. Both of mine are up to date but it still is not working......
lancerr Posted March 29, 2019 Posted March 29, 2019 (edited) Edit // Finally got it working. Be careful not to mess with the F14B PTT settings inside DCS. Set it back to default, restarted everything and it seemed to work. ----------- How is it working for you guys? On my end its detecting Jester but that's it. Commands like Jester Scan 50 does nothing and its not picking up the scan 50 or frankly anything after Jester. 10:06:04 PM - Constructing message... 10:06:04 PM - TX4 | SEL/AUTO: [ F-14 AI RIO ],[ ],[ ] Perform Start Procedure [ ] [ ] 10:06:04 PM - Specific recipient called, instant select mode = True 10:06:04 PM - Have result, identified as command : Startup 10:06:04 PM - Have result, identified as recipient : Jester 10:06:04 PM - Constructing message... 10:06:04 PM - TX4 | SEL/AUTO: [ F-14 AI RIO ],[ ],[ ] Perform Start Procedure [ ] [ ] 10:06:04 PM - Specific recipient called, instant select mode = True Sent from my SM-N960U1 using Tapatalk Edited March 29, 2019 by lancerr
Wheelyjoe Posted March 29, 2019 Posted March 29, 2019 Loving AIRIO so far, but is there any way to get custom waypoints in other than the ME?
overalien Posted March 29, 2019 Posted March 29, 2019 Hi Hollywood, AIRIO module is a treat. Thanks for that man!!! Three observations (two already mentioned here): - Stennis TACAN tune command is missing in the keywords - no INS alignment commands (yet?) - Radio tuning not possible with easy comms off (yet?) Sent from my iPhone using Tapatalk __________________ overalien Hog Driver starting to really like the Tomcat System specs: Intel i7-8700k - OC to 5.0 GHz | 32 GB RAM 3600 MHz | Nvidia 1080ti SLi | Mixed Storage - Win 10 and DCS on Samsung SSD 970 Pro Flightgear: 7 Displays (3 x 1440p, 1 X 1080p, 3 X Lilliput Touch) | 3 x Cougar MFDs | Warthog HOTAS | Thrustmaster TPR Pedals | iBEAM Shaker + Simshaker for Aviators w. Sound Module | Helios | VAICOM Pro + AIRIO | TrackIR 5
Recommended Posts