TACAN to find wingman?

[AbortedMan]

Anyone familiar with using TACAN to find your wingman distance (and/or bearing) in the Hornet? You can use TACAN like this in the Mirage, but when following the same steps in the Hornet all I could get was a spinning TACAN icon around my aircraft in the HSI. Anyone have success?

 

TACAN to wingman instructions for Mirage (followed this, but in context of the Hornet):

Set TACAN rotary to A/A and X or Y.

Use a separation between leader and wingman of 63 channels.

For example you on Channel 3 and your wingman on Channel 66.

Move the HSI rotary to TACAN.

You will see on the HSI distance display your distance with your wingman.

[Kayos]

Hopefully they get the datalink working soon so we can see them on the HSI

[Frosties]

To my knowledge that is how it shall be.

 

You can only see range to the other aircrafts, thats why the bearing is spinning.

[Frederf]

You will only get transponder ranging with buddy TACAN. The bearing equipment is the size of a house. No airplane smaller than a tanker has bearing capability.

[Shadow KT]

http://www.mudspike.com/how-to-use-the-air-to-air-tacan-in-dcs-a-10c/

[vctpil]

Hi,

 

I have tried, but seems not working with the F/A-18.

 

Any idea?

 

Thanks,

Vincent

[Oban]

A Real F18 pilot had this feature running on a recent fun video he made with Bananimal, that's posted here somewhere. CW Lemoine is the pilot I believe.

[195th_Magic]

A Real F18 pilot had this feature running on a recent fun video he made with Bananimal, that's posted here somewhere. CW Lemoine is the pilot I believe.

 

 

[BarTzi]

It does work. Yes, the needle will spin, just like in the A10C.

[-Painter-]

maybe cross check if you both did set TCN "ON" in the UFC if it did not work for you

[Beazle]

You need to be in A/A mode. Wingman has to be +63 from what you have. For example lead is 1x wingman will be 64x.

 

An easy one to remember is lead 29x and wingman 92x (29.92 standard altimeter setting) it will only give you range no bearing

 

Beazle

[Spiceman]

The OP didn’t mention whether his wingman was AI or not, but I don’t believe this works for AI wingmen. I’ve tried to have an F-18 set A/A TACAN to 29X and I set mine to 92X and nothing. I believe only AI tankers support A/A TACAN.

[vctpil]

No, it does not work with the F/A-18.

 

But if it really work for someone, may I ask to provide the detailed procedure in the editor and o board the aircraft ?

 

Thanks

[=Panther=]

Spam the ON/OFF button on the UFC, it seems that it works but very intermittent at best.

[Banman]

We got it to work yesterday in MP. Make sure TACAN is on in the UFC. Had a buddy use 6X, I used 69X (they have to be 63 apart). Mare sure A/A is also on and TCN is boxed in the center DDI. Not sure if you have to box it but we did anyway. It will give a range in the HUD about 1 inch below where Altitude is displayed. There will not be any bearing as to where they are at as previously stated. Just a distance. So theoritacally say it says 1.0, they could be at any point on a sphere with a radius of 1 mile from your aircraft. You can use this for when you go line abreast to know how far apart you are.

[sobe]

Banman

We have tried every way to get this to work with no joy. As you were able to do so, we will try again today.

[Spiceman]

I use it in MP all the time and it works fine.... it’s never not worked in MP.

[ShadowVonChadwick]

I use it in MP all the time and it works fine.... it’s never not worked in MP.

 

 

In that case would give us all a detailed checklist for the procedure ?

 

 

Thanks:joystick:

[BarTzi]

In that case would give us all a detailed checklist for the procedure ?

 

 

Thanks:joystick:

 

https://forums.eagle.ru/showpost.php?p=3695771&postcount=15 It's very simple.

[ShadowVonChadwick]

Its not working for us