backspace340 Posted November 7, 2018 Posted November 7, 2018 it would be good if we could catch the laser with our jhmcs :D the hardest part will be the catching the laser lock i assume The sensor FOV is pretty big - as long as you're in the rough area you should be fine. It'll be a lot easier online using the JTACs that pop smoke on targets - in SP the only issue is the JTAC doesn't give the location as lat-long coordinates (or that the Hornet can't input MGRS coordinates yet).
Arkangel Posted November 7, 2018 Posted November 7, 2018 The sensor FOV is pretty big - as long as you're in the rough area you should be fine. It'll be a lot easier online using the JTACs that pop smoke on targets - in SP the only issue is the JTAC doesn't give the location as lat-long coordinates (or that the Hornet can't input MGRS coordinates yet). There is a mod to change coordinates from MGRS to lat-long.
Silvern Posted November 7, 2018 Posted November 7, 2018 Are AGM-65F and G still planned for this month?
DeathAngel1 Posted November 7, 2018 Posted November 7, 2018 Are AGM-65F and G still planned for this month? I hope so...and HARM and LGB also.:thumbup: ..:NAVY PILOTS ARE THE THE BEST PILOTS:..
Silvern Posted November 7, 2018 Posted November 7, 2018 I hope so...and HARM and LGB also.:thumbup: I don't know about those, but Wags stated in Hornet mini-updates that G and F were delayed to November. So I'm wondering if they're still planned...
backspace340 Posted November 7, 2018 Posted November 7, 2018 I don't know about those, but Wags stated in Hornet mini-updates that G and F were delayed to November. So I'm wondering if they're still planned... I have a feeling they're not going to guess at delivery dates any more / for a while, they got burned by a pretty fierce backlash to the JHMCS/65E. We might only find out when things are already finished and ready for the next release.
DeathAngel1 Posted November 7, 2018 Posted November 7, 2018 Guys how can i make JTAC to lase targets. When I put JTAC near to target, and select it to use laser guidance, nothing happens, and JTAC says only coordinates, not 4-digit laser code. ..:NAVY PILOTS ARE THE THE BEST PILOTS:..
Milli Posted November 7, 2018 Posted November 7, 2018 I'm having exactly the same problem. JTAC doesn't lase or give a laser code.
Flamin_Squirrel Posted November 7, 2018 Posted November 7, 2018 https://forums.eagle.ru/showpost.php?p=3679744&postcount=86 I'm going to try the Wags mission. Hopefully it'll work.
schurem Posted November 7, 2018 Posted November 7, 2018 Getting the FAC to lase things is finicky to say the least. Make sure he has Line Of Sight to the intended targets. If you want you can cheat a little and have JTAC be a predator drone set as invisible in the editor. I5 9600KF, 32GB, 3080ti, G2, PointCTRL
DeathAngel1 Posted November 7, 2018 Posted November 7, 2018 I found what is the problem with JTAC - just need to select what kind of weapons will be used by aircraft (GBU`s AG missiles, etc.) via JTAC`s menu and it will give you a laser mark and a code. ..:NAVY PILOTS ARE THE THE BEST PILOTS:..
ED Team Wags Posted November 7, 2018 ED Team Posted November 7, 2018 So we have the AGM 65 E now. Where are instructions on how to use it? Youtube: https://www.youtube.com/user/wagmatt Twitch: wagmatt System: https://forums.eagle.ru/showthread.php?p=3729544#post3729544
Cloudie Posted November 7, 2018 Posted November 7, 2018 you must to turn on the JHMCS by HMD ROTATING SWITCH on your right under the IR COOL SYSTEM Sorry I deleted my message, it was totally my fault. It was a mod for the HUD color that broke with the update, disabled the mod and the JHMCS is visible now.
Flamin_Squirrel Posted November 7, 2018 Posted November 7, 2018 Can someone explain the use/purpose of the DLY1/DLY2 views?
Kang Posted November 7, 2018 Posted November 7, 2018 Not having actually pushed that button yet I had assumed those were delayed fusing options for the Mav?
Kazius Posted November 7, 2018 Posted November 7, 2018 Can someone explain the use/purpose of the DLY1/DLY2 views? I'm no expert, but I think the purpose is so the missile crashes into a building before exploding rather than exploding as the missile hits the roof or the outside wall. However, I have no clue how long each delay is. I also don't know if a maverick has any ability to penetrate concrete or steel so not sure if the delay is useful for tanks or bunkers. So hopefully someone else can clarify that.
Rom_un Posted November 7, 2018 Posted November 7, 2018 Select MAV, setup 4 digit laser code, then swith to A/A mode, and back to A/G mode. This is what you get : Cage/Uncage show the scan, and when JTAC turn laser on, MAV has a lock and can be fired. FOV is not functionnal.
Hog_No32 Posted November 8, 2018 Posted November 8, 2018 Select MAV, setup 4 digit laser code, then swith to A/A mode, and back to A/G mode. This is what you get : Cage/Uncage show the scan, and when JTAC turn laser on, MAV has a lock and can be fired. FOV is not functionnal. Is that with the E-model or the „modded“ G-model of the AGM-65?
backspace340 Posted November 8, 2018 Posted November 8, 2018 Is that with the E-model or the „modded“ G-model of the AGM-65? It does it with the E, it's a bug that's been reported. Steps are actually easier than that - select Mav on the stores page twice (so you go to the seeker page), then select AIM-7 (doesn't matter if you've got them equipped), you'll see the placeholder IR Mav page.
Hog_No32 Posted November 8, 2018 Posted November 8, 2018 It does it with the E, it's a bug that's been reported. Steps are actually easier than that - select Mav on the stores page twice (so you go to the seeker page), then select AIM-7 (doesn't matter if you've got them equipped), you'll see the placeholder IR Mav page. Thanks, backspace. Very interesting :) Wanted to try out the LMav yesterday but in my selfmade mission I didn‘t get the JTAC to lase the target for me. His 9-line read: „mark:no“ despite the fact that I set „Laser“ as the designation method in the ME and there were no errors indicating no L-o-S or out of range. Will habe to learn how to set up JTAC properly...
backspace340 Posted November 8, 2018 Posted November 8, 2018 Thanks, backspace. Very interesting :) Wanted to try out the LMav yesterday but in my selfmade mission I didn‘t get the JTAC to lase the target for me. His 9-line read: „mark:no“ despite the fact that I set „Laser“ as the designation method in the ME and there no errors indicating no L-o-S or out of range. Will habe to learn how to set up JTAC properly... I had the same thing, no idea what I was doing wrong - if you go to the mini-updates thread, Wags has attached a mission just below the Maverick video and after I couldn't get mine working I used that without any issues.
Hog_No32 Posted November 8, 2018 Posted November 8, 2018 I had the same thing, no idea what I was doing wrong - if you go to the mini-updates thread, Wags has attached a mission just below the Maverick video and after I couldn't get mine working I used that without any issues. Thanks again! I will try out that mission and also compare the JTAC setup in that mission to mine.
olivier-gaming Posted November 8, 2018 Posted November 8, 2018 I had the same thing, no idea what I was doing wrong - if you go to the mini-updates thread, Wags has attached a mission just below the Maverick video and after I couldn't get mine working I used that without any issues. Maybe this vidéo Can help you (it s a french langage but its visual so...)
Recommended Posts