NIGHTMARE-01 Posted October 5, 2019 Posted October 5, 2019 Hi all, I'm having an issue with the F-16 where it is banking ever so slightly to the right! I have set deadzones on my roll and rudder axis (~5) and cannot see any sort of input from my joystick. I am wondering if this is an issue others are experiencing? I thought to make a post here, as to remain vigilant... just in case this is a bug! Thanks, J
Deano87 Posted October 5, 2019 Posted October 5, 2019 Are you flying with the Tpod? If so it’ll need some left trim to trim it out. Proud owner of: PointCTRL VR : Finger Trackers for VR -- Real Simulator : FSSB R3L Force Sensing Stick. -- Deltasim : Force Sensor WH Slew Upgrade -- Mach3Ti Ring : Real Flown Mach 3 SR-71 Titanium, made into an amazing ring. My Fathers Aviation Memoirs: 50 Years of Flying Fun - From Hunter to Spitfire and back again.
dg6546 Posted October 5, 2019 Posted October 5, 2019 Are you flying with the Tpod? If so it’ll need some left trim to trim it out. Then it starts banking to the left. There is no perfect trim yet I think.
Deano87 Posted October 5, 2019 Posted October 5, 2019 You can do it if you flick the trim hat very quickly. Although I agree the roll trim is over sensitive. Proud owner of: PointCTRL VR : Finger Trackers for VR -- Real Simulator : FSSB R3L Force Sensing Stick. -- Deltasim : Force Sensor WH Slew Upgrade -- Mach3Ti Ring : Real Flown Mach 3 SR-71 Titanium, made into an amazing ring. My Fathers Aviation Memoirs: 50 Years of Flying Fun - From Hunter to Spitfire and back again.
Calicrook Posted October 5, 2019 Posted October 5, 2019 I knew the Tpod would cause some drag to the right... I was wonder if other people were experiencing the trim issue as well lol i7-6700k| 32GB ram| GTX 2080 founders edition| Oculus Rift 2 My WIP Youtube
Falconeer Posted October 5, 2019 Posted October 5, 2019 (edited) I'm having a slight roll to the left, only with stores loaded ctrl+enter shows my controllers are centered Edited October 6, 2019 by Falconeer Planes: Choppers: Maps: Flaming Cliffs 3 Black Shark 2 Syria A-10C Tank killer 2 Black Shark 3 Persian Gulf F/A18C Hornet AH-64 Apache Mariana's F-16C Viper Afghanistan F-15E Strike Eagle Kola Peninsula Mirage 2000C AJS-37 Viggen JF-17 Thunder F-14 Tomcat F-4E Phantom
Deano87 Posted October 5, 2019 Posted October 5, 2019 Completely clean? No weapons on any stores? Proud owner of: PointCTRL VR : Finger Trackers for VR -- Real Simulator : FSSB R3L Force Sensing Stick. -- Deltasim : Force Sensor WH Slew Upgrade -- Mach3Ti Ring : Real Flown Mach 3 SR-71 Titanium, made into an amazing ring. My Fathers Aviation Memoirs: 50 Years of Flying Fun - From Hunter to Spitfire and back again.
Chefen41 Posted October 5, 2019 Posted October 5, 2019 Clean configuration and it rolls slightly to the right.
Greyman Posted October 5, 2019 Posted October 5, 2019 as there is another thread that suggests the aircraft pulls to the left, is there a chance that this might be something to do with the bit of the startup procedure that involves resetting the trim back to the centre, after one of the checks? if the trim isn't set perfectly to the neutral position, might this be causing the drift?
NIGHTMARE-01 Posted October 5, 2019 Author Posted October 5, 2019 Glad to see this issue isn't just limited to myself. I think it's good that we have confirmed it's occurring for multiple people; out of curiosity, what is everyone using for their setup in terms of HOTAS? I hope this is one ED can patch together quickly, if it is an issue! Thanks for the responses all.
Covurt Posted October 23, 2019 Posted October 23, 2019 Has this been confirmed or has a fix been found?
Donut Posted October 23, 2019 Posted October 23, 2019 Right bank? Everything I have experienced and seen reported on the forums is about left bank in the air and left drift on the ground. Do you guys have tracks showing this? i5 7600K @4.8GHz | 1080 Ti | 32GB 3200MHz | SSD | DCS SETTINGS | "COCKPIT"
Harlikwin Posted October 23, 2019 Posted October 23, 2019 Clean configuration and it rolls slightly to the right. yup... Roll trim is too sensitive to trim out the small movements, so its a constant, L/R trim... Autopilot works though. New hotness: I7 9700k 4.8ghz, 32gb ddr4, 2080ti, :joystick: TM Warthog. TrackIR, HP Reverb (formermly CV1) Old-N-busted: i7 4720HQ ~3.5GHZ, +32GB DDR3 + Nvidia GTX980m (4GB VRAM) :joystick: TM Warthog. TrackIR, Rift CV1 (yes really).
Covurt Posted October 23, 2019 Posted October 23, 2019 You shouldn't have to use the trim when slightly out of trim though. The FCS should handle that for you. I get left roll in the air and a lot of left turn on the ground....like full right rudder after landing. All of my controls are dead center according to the RightCtrl/Enter graph.
Donut Posted October 23, 2019 Posted October 23, 2019 You shouldn't have to use the trim when slightly out of trim though. The FCS should handle that for you. I get left roll in the air and a lot of left turn on the ground....like full right rudder after landing. All of my controls are dead center according to the RightCtrl/Enter graph. Yes, there is obviously something seriously wrong with the F-16 right now as more and more of us are reporting issues about uncommanded roll in the air and yaw/drift on the ground. i5 7600K @4.8GHz | 1080 Ti | 32GB 3200MHz | SSD | DCS SETTINGS | "COCKPIT"
Hamilton Posted October 25, 2019 Posted October 25, 2019 Clean configuration and it rolls slightly to the right. Same here, clean configuration. _________________________________ Aorus Z390 Extreme MB | i9 9900k CPU @ 5.0 GHz | EVGA RTX 2080 Ti FTW3 Ultra | 32 GB G Skill Trident Z 3600 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | Corsair TX 850M PS | Samsung 970 Evo Plus M.2 NVMe SSD 1TB |TMWH Hotas with VPC WarBRD Base| Corsair Gamer 570x Crystal Case | HP Reverb
spidierox Posted October 30, 2019 Posted October 30, 2019 Same here, clean configuration. Same here, but both cases: clean and loaded configuration (no TPOD)
Recommended Posts