[LATER IN EARLY ACCESS] slave WPDSG to lantirn?

[silentbob11]

Maybe a noob question but - if I press WPDSG on HSI or SA page - I can see the diamond on the HUD but when I try to depress and desegregate it - it seem to lock on a different place completely.

 

I hope I'm clear about what I'm asking - I'm just trying to slave the WPDSG to the LANTIRN pod

 

SB11

[Ziptie]

14 has the LANTIRN pod, 18 has the Litening pod.

 

 

If you OSB push button on WPDSG, you will have to OSB push button again on WPDSG in order to undesignate the target. (Always a good habit to NWS for undesignate).

 

When using the Litening Pod to designate a specific target, you will need to have the FLIR as SOI, then TDC depress to designate a target. NWS to undesignate.

 

 

Cheers,

 

Don (callsign Ziptie)

[silentbob11]

14 has the LANTIRN pod, 18 has the Litening pod.

 

 

If you OSB push button on WPDSG, you will have to OSB push button again on WPDSG in order to undesignate the target. (Always a good habit to NWS for undesignate).

 

When using the Litening Pod to designate a specific target, you will need to have the FLIR as SOI, then TDC depress to designate a target. NWS to undesignate.

 

 

Cheers,

 

Don (callsign Ziptie)

 

You're correct sir, :thumbup: I was referring to tha LITENING pod of the Hornet. My bad.

Anyway, I was trying to figure out how to make the FLIR designation point "follow" the WPDSG point - assign OSB WPT than OSB WPDSG than make the FLIR as SOI and than "SOMEHOW" make it align with the waypoint I designated with the WPDSG earlier. that what I am looking for

 

Thanx

[Ziptie]

You're correct sir, :thumbup: I was referring to tha LITENING pod of the Hornet. My bad.

Anyway, I was trying to figure out how to make the FLIR designation point "follow" the WPDSG point - assign OSB WPT than OSB WPDSG than make the FLIR as SOI and than "SOMEHOW" make it align with the waypoint I designated with the WPDSG earlier. that what I am looking for

 

Thanx

 

Having FLIR as SOI, the depressing WPDSG on the SA or HSI after having the desired waypoint selected, should automatically slave the TGP to that point. But I’m not certain that ED has implemented this yet for the Hornet.. For now I believe you have to use the SA page for reference, and place the Litening pod “indicator” over the desired waypoint, and with the FLIR as SOI, just move the TDC cursor to get it to latch in the approximate area (can be fairly precise this way).

 

 

Cheers,

 

Don (callsign Ziptie)

[silentbob11]

Thats exectly how I use it now, and thats why I was trying to figure out how to use it, well, quicker by slaving it to the WPDSG SOB

 

Thanx

[moggel]

Slave LANTIRN to WP?

 

Is there a way to slave the LANTIRN to the active steerpoint or is that still in the works?

[Habu_69]

Is there a way to slave the LANTIRN to the active steerpoint or is that still in the works?

Not yet implemented. You CAN slew the square TGP LOS icon to a WP on the SA page.

[QuiGon]

Is there a way to slave the LANTIRN to the active steerpoint or is that still in the works?

It's already possible to slave the LANTIRN to various waypoints using the QWp- and QWp+ functions on the S3 hat of the Tomcat. The Hornet does not use the LANTIRN as mentioned above.

[Paco]

Ability to slave TGP to a waypoint

 

Is this ever going to happen? A TGP is a targeting tool, not a search tool. To have a TGP that doesn't have that ability is a severe degradation, when employing the Hornet as it should be. Same for the AV8. As far as I know, the A-10C is the only module where we can slew a TGP to a point using both Lat Long and MGRS. Bonus would be to have the TGP in the A/G mode linked to the JHMCS.

[BarTzi]

It's going to happen sometime in the future. ED said December will be a great month for the Hornet, and that TGP improvements are planned. Personally- I would like to hear about:

 

-Slave to target and CZ

-Missing symbology such as: coordinates, range, scale, airplane orientation, north arrow

-HUD symbology

-Status of SP and A/A mode

[QuiGon]

Is this ever going to happen? A TGP is a targeting tool, not a search tool. To have a TGP that doesn't have that ability is a severe degradation, when employing the Hornet as it should be. Same for the AV8. As far as I know, the A-10C is the only module where we can slew a TGP to a point using both Lat Long and MGRS. Bonus would be to have the TGP in the A/G mode linked to the JHMCS.

Exactly, the TGP is a targeting tool, not a search tool. So instead of being forced to slew it around manually to search for the correct target, we should be able to point it on given target locations.

 

Btw, even the F-14s LANTIRN can be slewed to various waypoints, not just the A-10Cs TGP.

[Paco]

I stand corrected, you can slew the TGP to a W/P....on the AV8. Hornet...not so much.

[silentbob11]

OK so no slaving to WP at the moment.

but

is there a way to slew the TGP diamond on the HUD? right now you can slew to search for a target on the FLIR screen, while the HUD diamond stays on its previous location. Only depressing TDC makes the HUD diamond "jump" to correspond with it's FLIR screen location. Is there a way to make the FLIR screen and the HUD diamond move together?

 

SB11

[Ziptie]

Not that I have discovered as of yet, and have done my fair share of discovering....

 

Cheers,

 

Don (callsign Ziptie)

[silentbob11]

Thats a shame...

wonder if the real Litening/Hornet has that feature in RL....

 

SB11

[Tholozor]

It probably does else ED wouldn't even plan on modeling it.

[silentbob11]

Looks like the Hornet was rushed out super half baked... even for ED standards...

[BarTzi]

Looks like the Hornet was rushed out super half baked... even for ED standards...

 

It's the TGP that was released super half baked - not the Hornet itself. There was silence on that front (TGP) since it was originally released, but that's probably because of the priorities at that time (Viper)

[QuiGon]

OK so no slaving to WP at the moment.

but

is there a way to slew the TGP diamond on the HUD? right now you can slew to search for a target on the FLIR screen, while the HUD diamond stays on its previous location. Only depressing TDC makes the HUD diamond "jump" to correspond with it's FLIR screen location. Is there a way to make the FLIR screen and the HUD diamond move together?

 

SB11

HUD indication is still in development and will come later. Same is true for WP-slaving AFAIK.