Jump to content

AH-64 TEDAC unit built

Alphamike7
 Share

Recommended Posts

corbu1

corbu1

Posted
Posted
vor 21 Stunden schrieb GNCRamBo:

Hello flight enthusiasts,

I have ordered a TEDAC from Alain Dofour and have attached a review.

(Small spoiler: Great work, I'm very happy with it 🙂 )

Best regards
RamBo

TEDAC Review 03.2024.pdf 4.1 MB · 21 Downloads

Thank you for your review,

Alain‘s Tedac looks really great. According to your pictures it looks really beautiful made. I‘m really thinking about it!

DCS Version: 2.9.15.9408
Modules: UH-1H - SA342 - KA-50 BS3 - MI-24P - MI-8MTV2 - AH-64D - CH-47F - OH-58D - UH-60L(Mod, n.i.) - OH-6A(Mod, n.i.) - A-10CII - F-16C - F/A-18C - AJS37 - F-14 - MiG-21bis - JF-17 - Mirage F1 - MiG-29A - (prepurchase) - FC2024 -Combined Arms - Supercarrier - NTTR - Normandy2.0 - Channel - Persian Gulf - Syria - SA - Sinai - Afghanistan - Kola - Iraq - Cold War Germany — Waiting for: BO-105 - AH-1G/F(Mod)

DCS-Client: 9800X3D, 64GB 6200, RTX3090, 1TB M2 NVMe(win10), 4TB M2 NVMe(DCS), VR VivePro2, PointCTRL, VaicomPro, Wacom Intuos S with VRK v2Beta

DCS-DServer: 11600KF, 64GB 3600, GTX1080, 1TB M2 NVMe(win10), 2TB M2 NVMe(DCSDServer), DCS Olympus

Simpit: NLR Flightsim Pro Cyclic: TM Warthog Grip with 30cm Extension + VPforce Rhino FFB FW Stick: TM Warthog Grip and Base, Throttle: TM Warthog Pedals: Komodo Sim. with Dampers Collective: VPC Rotorplus+AH-64D Grip Other: NLR HF8, Buttkicker (3*MiniConcert), TotalControls AH64D MPD‘s and EUFD, Alain Dufour’s AH-64 TEDAC, TM MFD, Streamdecks (1*32,3*15,1*6), VPC CP#1

  • 2 weeks later...
  • Replies 198
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Alphamike7
Alphamike7

Hello to all, i will here share my work on TEDAC display unit. I am quite in project now, making prototypes, electronics...etc But first i would like, if it is posible, to get in touch with aweso

Grennymaster
Grennymaster

So i have mine completet 🙂 took about 30- 40 hr of work in generell. Printing, wiring, painting, assamble since i am not able to programm Arduino, i used BBI Board from Leo Bodnar. downside

SrSosio
SrSosio

Once I've finished mine, I hope to be able to share everything  with clear instructions. I will be sharing the code as well as gerber zip files ready to upload to PCBWay or similar, so anyone who want

LT. Warhero

LT. Warhero

Posted
Posted (edited)

Finally coming along. Pretty happy with the design and size now. Feels like it is what it needs to be. Next up; software 🙂

For those who are interested in building this themselves. files are available on

https://cults3d.com/en/3d-model/game/boeing-ah-64-apache-helicopter-left-and-right-hand-grip-for-co-pilot-gunner-seat

They're €60 but for people contacting me here, ill be happy to send em over for 55 😉

20240324_145217.jpg

 

 

20240324_145258.jpg

20240324_145311.jpg

20240324_145424.jpg

Edited by LT. Warhero
  • Like 1
ruprecht

ruprecht

Posted
Posted
On 3/28/2024 at 3:10 AM, LT. Warhero said:

For those who are interested in building this themselves. files are available on

 

 

Is this your original design? 

DCS Wishlist: | Navy F-14 | Navy F/A-18 | AH-6 | Navy A-6 | Official Navy A-4 | Carrier Ops | Dynamic Campaign | Marine AH-1 |

 

Streaming DCS sometimes:

LT. Warhero

LT. Warhero

Posted
Posted
5 hours ago, ruprecht said:

Is this your original design? 

yup 🙂

Started over entirely after the previous one which was too big. And full of design mistakes and missing links in fusion

Zarma

Zarma

Posted
Posted (edited)

Warthog HOTAS

Saitek Combat Rudder pedals

Multipurpose UFC

Cougar MFD

TEDAC by Alain Dufour

Monstertech MFC chair with supports.

AH64 Virpil grip should arrive next week

image.jpeg

Edited by Zarma

i9 9900k, 64 Go RAM, RTX 4090, Warthog HOTAS Throttle & Stick, Virpil AH64 collective, TPR rudder, MFD Cougar, Trackir 5 Pro, Multipurpose UFC, Alain Dufour's TEDAC and Oculus Rift S (when I want some VR),

http://www.twitch.tv/zarma4074 /  https://www.youtube.com/user/Zarma4074 

 

Copy-of-DCS-A-10C-User-Bar-CMR-ConvertImage.jpg

  • 2 months later...
corbu1

corbu1

Posted
Posted

Cool 😎 Looking nice!

DCS Version: 2.9.15.9408
Modules: UH-1H - SA342 - KA-50 BS3 - MI-24P - MI-8MTV2 - AH-64D - CH-47F - OH-58D - UH-60L(Mod, n.i.) - OH-6A(Mod, n.i.) - A-10CII - F-16C - F/A-18C - AJS37 - F-14 - MiG-21bis - JF-17 - Mirage F1 - MiG-29A - (prepurchase) - FC2024 -Combined Arms - Supercarrier - NTTR - Normandy2.0 - Channel - Persian Gulf - Syria - SA - Sinai - Afghanistan - Kola - Iraq - Cold War Germany — Waiting for: BO-105 - AH-1G/F(Mod)

DCS-Client: 9800X3D, 64GB 6200, RTX3090, 1TB M2 NVMe(win10), 4TB M2 NVMe(DCS), VR VivePro2, PointCTRL, VaicomPro, Wacom Intuos S with VRK v2Beta

DCS-DServer: 11600KF, 64GB 3600, GTX1080, 1TB M2 NVMe(win10), 2TB M2 NVMe(DCSDServer), DCS Olympus

Simpit: NLR Flightsim Pro Cyclic: TM Warthog Grip with 30cm Extension + VPforce Rhino FFB FW Stick: TM Warthog Grip and Base, Throttle: TM Warthog Pedals: Komodo Sim. with Dampers Collective: VPC Rotorplus+AH-64D Grip Other: NLR HF8, Buttkicker (3*MiniConcert), TotalControls AH64D MPD‘s and EUFD, Alain Dufour’s AH-64 TEDAC, TM MFD, Streamdecks (1*32,3*15,1*6), VPC CP#1

JetCat

JetCat

Posted
Posted

The things that can be done with 3D printers nowadays are as limitless as they are incredible! (I heard there are machines ready to print even houses with 3D printers.)

I wonder how long it will take until one can print out some Apache of F-fighter cockpit and sit in there as new simpit, just for fun. Without all the wooden frame structures and other stuff simpit builders currently do.

  • Like 2
  • 5 months later...
LT. Warhero

LT. Warhero

Posted
Posted
On 6/29/2024 at 6:15 PM, JetCat said:

The things that can be done with 3D printers nowadays are as limitless as they are incredible! (I heard there are machines ready to print even houses with 3D printers.)

I wonder how long it will take until one can print out some Apache of F-fighter cockpit and sit in there as new simpit, just for fun. Without all the wooden frame structures and other stuff simpit builders currently do.

its preferable to build the large sections out of wooden materials since printing a flat surface without details is a waste of printer materials and time. Printing items with high details is usually done with low printing speeds and take up quite a bit of time. Just printing the surfaces with details and make inlays in the wooden panels or screw them to the panels would be less time consuming and can be done with a minimum of compromise usually. It just take a ton of time building a fully enclosed simpit.

hannibal

hannibal

Posted
Posted
On 6/29/2024 at 12:15 PM, JetCat said:

The things that can be done with 3D printers nowadays are as limitless as they are incredible! (I heard there are machines ready to print even houses with 3D printers.)

I wonder how long it will take until one can print out some Apache of F-fighter cockpit and sit in there as new simpit, just for fun. Without all the wooden frame structures and other stuff simpit builders currently do.

3d printer does unlock possibilities!

 

  • Like 1

find me on steam! username: Hannibal_A101A

http://steamcommunity.com/profiles/76561197969447179

  • 3 weeks later...
loadie150

loadie150

Posted
Posted

currently building a TEDAC for myself. Coming along pretty well if I must say, lol.. waiting on some parts to arrive and some decent filament as well! Also plan on using a leobodnar board too, if I have to I'll add a 12 button board on top.

20250102_111651.jpg

  • Like 4
loadie150

loadie150

Posted
Posted
On 1/2/2025 at 3:54 PM, alaindufour said:

if you need a tedac im building them 

 

IMG_9058.jpeg

IMG_9080.jpeg

IMG_9063.jpeg

IMG_9064.jpeg

https://discord.gg/8rzjSTJW

Thanks for the offer; However, I'm half way through building my own! At the  wiring stage now. Just having a hard time wiring the momentary on/on toggle switches. I have a 3 spdt 3 pin toggle switch. both sides are on and he center is stationary with the ground wire. I've wired them up and doesn't matter what I do, they show as 1 button push.

alaindufour

alaindufour

Posted
Posted
2 hours ago, loadie150 said:

Thanks for the offer; However, I'm half way through building my own! At the  wiring stage now. Just having a hard time wiring the momentary on/on toggle switches. I have a 3 spdt 3 pin toggle switch. both sides are on and he center is stationary with the ground wire. I've wired them up and doesn't matter what I do, they show as 1 button push.

the center pin is the ground snd side pin to a input. it should show as 2 switches 

loadie150

loadie150

Posted
Posted
On 1/4/2025 at 4:57 PM, alaindufour said:

the center pin is the ground snd side pin to a input. it should show as 2 switches 

Yup, thanks much! It took me a few minutes to figure that out, lol... I'm no electronics expert by any means....

 

  • 3 weeks later...
corbu1

corbu1

Posted
Posted
vor 20 Minuten schrieb weaselgx:

The discord link is expired. I’m interested in learning more.

https://discord.gg/738T4Jxq
 

try this one

 

  • Thanks 2

DCS Version: 2.9.15.9408
Modules: UH-1H - SA342 - KA-50 BS3 - MI-24P - MI-8MTV2 - AH-64D - CH-47F - OH-58D - UH-60L(Mod, n.i.) - OH-6A(Mod, n.i.) - A-10CII - F-16C - F/A-18C - AJS37 - F-14 - MiG-21bis - JF-17 - Mirage F1 - MiG-29A - (prepurchase) - FC2024 -Combined Arms - Supercarrier - NTTR - Normandy2.0 - Channel - Persian Gulf - Syria - SA - Sinai - Afghanistan - Kola - Iraq - Cold War Germany — Waiting for: BO-105 - AH-1G/F(Mod)

DCS-Client: 9800X3D, 64GB 6200, RTX3090, 1TB M2 NVMe(win10), 4TB M2 NVMe(DCS), VR VivePro2, PointCTRL, VaicomPro, Wacom Intuos S with VRK v2Beta

DCS-DServer: 11600KF, 64GB 3600, GTX1080, 1TB M2 NVMe(win10), 2TB M2 NVMe(DCSDServer), DCS Olympus

Simpit: NLR Flightsim Pro Cyclic: TM Warthog Grip with 30cm Extension + VPforce Rhino FFB FW Stick: TM Warthog Grip and Base, Throttle: TM Warthog Pedals: Komodo Sim. with Dampers Collective: VPC Rotorplus+AH-64D Grip Other: NLR HF8, Buttkicker (3*MiniConcert), TotalControls AH64D MPD‘s and EUFD, Alain Dufour’s AH-64 TEDAC, TM MFD, Streamdecks (1*32,3*15,1*6), VPC CP#1

  • 2 weeks later...
Hammer1-1

Hammer1-1

Posted
Posted (edited)
2 hours ago, Magic Man said:

Link expired again.

https://discord.gg/zj5HQtKW

he's essentially retired from building these for profit, so keep that in mind.

Edited by Hammer1-1
  • Like 1

Intel 13900k @ 5.8ghz | 64gb GSkill Trident Z | MSI z790 Meg ACE | Zotac RTX4090 | Asus 1000w psu | Slaw RX Viper 2 pedals | VPForce Rhino/VKB MCE Ultimate + STECS Mk2  MAX / Virpil MongoosT50+ MongoosT50CM | Virpil TCS+/ AH64D grip/custom AH64D TEDAC | Samsung Odyssey G9 + Odyssey Ark | Next Level Racing Flight Seat Pro | WinWing F-18 MIPS | No more VR for this pilot.
 My wallpaper and skins

On today's episode of "Did You Know", Cessna Skyhawk crashes into cemetery; over 800 found dead as workers keep digging.

 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...