Rusty_M Posted November 12, 2010 Posted November 12, 2010 (edited) I had a search around, and couldn't find a thread with this information. I think it'd be really useful to people to know which headsets can fit the TrackClip pro and how easily they do it. I'll keep this OP as a list and update it as I get confirmed information from other forum users. If this helps just one other simmer, I'll be happy. Most of the information I'm going to start with is stolen from a thread at NaturalPoint's forums. Feel free to contribute with further info/corrections. Confirmed Compatible: Audio Technica ATH-AD700 Beyerdynamic DT234 pr Creative Fatal1ty Creative HS-1200 Cyber Snipa SONAR Hama Headset CS-453 KOSS SB45 Logitech G35 Plantronics Audio 770 Plantronics Gamecoms 377 Plantronics GameCom 777 Razer Barracuda HP-1 Razer Megalodon Saitek Pro Flight Headset Sennheiser HD238 Sennheiser HD470 Sennheiser HD555 - Only when "extended" Sennheiser PC 150 sennheiser PC161 Sennheiser PC 166 Sennheiser PC 350 - Only when "extended" Sennheiser RS120 Speedlink Medusa Sony MDR-XD200 - note these have no mic and are just headphones (I currently have them) Technics RP-F350 Tritton AX51 Zalman Headset Alternative Methods Hair band/alice band Martial-arts belt (i'm sure the art doesn't matter, but i'm not trying my own!) Xbox 360 Live Headset (old dead edition) - with mic & earpiece removed. Confirmed incompatible: Audio Technica ATH-A700's Edited November 29, 2010 by Rusty_M The world is going mad. Me? I'm doing fine! http://www.twitch.tv/rusty_the_robot https://www.youtube.com/user/RustyRobotGaming
topdog Posted November 12, 2010 Posted November 12, 2010 I held my proclip on with just a makeshift bandana for a while (it was actually an old jiu-jitsu belt :D). Even if it doesn't fit directly onto a given headset it should be easy to somehow clip or tie it on to something else that does. [ i7 2600k 4.6GHz :: 16GB Mushkin Blackline LV :: EVGA GTX 1080ti 11GB ] [ TM Warthog / Saitek Rudder :: Oculus Rift :: Obutto cockpit :: Acer HN274H 27" 120Hz :: 3D Vision Ready ]
Yomo Posted November 12, 2010 Posted November 12, 2010 (edited) I used an old dead Xbox 360 wired headset (the official MS one-sided one). Remove the earpiece/mic where it connects to the rest of the headband, fasten the proclip to the remaining part of the white sliding section on the band, and you're good to go. Adjustable and comfy(ish). RB Edited November 13, 2010 by rb05033 (JTF-1) Yomo | 55th FS JTF-1 Discord Asus Prime Z370 MB // Intel i7 8086k @ 5GHz // 32GB DDR4 3200 // RTX 2080ti // Virpil FSSB3 Lighting, Cougar Throttle with USB mod, T-50 Base + Warthog HOTAS, custom collective // Thrustmaster TPR // Vipergear v2 ICP // 3xCougar MFDs // a bunch of DIY Button Boxes // Oculus Rift
kylania Posted November 12, 2010 Posted November 12, 2010 I use mine with the old Plantronics Audio 770 and it's tight, but fits nicely along side the microphone. [sIGPIC][/sIGPIC] Christmas Cheer - A Landing Practice Mission : Beta Paint Schemes : HOTAS Keyboard Map : Bingo Fuel - A DCS A-10C Movie
71st_Mastiff Posted November 13, 2010 Posted November 13, 2010 works great with my turtle beach 5.1 sursound head set. http://www.turtlebeach.com/products/pc-gaming-headsets/ear-force-hpa2.aspx "any failure you meet, is never a defeat; merely a set up for a greater come back", W Forbes. "Success is not final, failure is not fatal, it is the courage to continue that counts", "He who never changes his mind, never changes anything," Winston Churchill. MSI z690 MPG DDR4 || i9-14900k|| ddr4-128gb PC3200 |zotac RTX 5080|Game max 1300w|Win11| |turtle beach elite pro 5.1|| ViRpiL,T50cm2||MFG Crosswinds|| VT50CM-plus rotor Throttle || G10 RGB EVGA Keyboard/MouseLogitech || PiMax Crystal VR || 32 Asus||
Succellus Posted November 13, 2010 Posted November 13, 2010 I have a zalmann 5.1 that i find great with a track ir Pro, perfect!! HaF 922, Asus rampage extreme 3 gene, I7 950 with Noctua D14, MSI gtx 460 hawk, G skill 1600 8gb, 1.5 giga samsung HD. Track IR 5, Hall sensed Cougar, Hall sensed TM RCS TM Warthog(2283), TM MFD, Saitek pro combat rudder, Cougar MFD.
bumfire Posted November 13, 2010 Posted November 13, 2010 Fits onto my technics headphones. Just a pity that the clip pro is a cheap piece of shit that falls apart and needs to be held together with rubber bands to stop the back piece from falling off, not to mention the actual piece with the lights on it, it just loves to pop out of its swivel hole... But apart from that it fits fine on my headset.
MackTheKnight Posted November 13, 2010 Posted November 13, 2010 fits perfectly on my Astro A30 headset.
Total Posted November 13, 2010 Posted November 13, 2010 Fully Compatible with the Turtle Beach Ear Force HPA 2 5.1 surround sound headsets.
104th_Crunch Posted November 13, 2010 Posted November 13, 2010 I have a thin light Logitech headset. I cut an eraser into a small shim and used it to make the headset band thicker to fit the minimum gap of the TIR clip.
Rusty_M Posted November 13, 2010 Author Posted November 13, 2010 Just a pity that the clip pro is a cheap piece of shit that falls apart and needs to be held together with rubber bands to stop the back piece from falling off, not to mention the actual piece with the lights on it, it just loves to pop out of its swivel hole... So very true. I'm often frightened of breaking it. The world is going mad. Me? I'm doing fine! http://www.twitch.tv/rusty_the_robot https://www.youtube.com/user/RustyRobotGaming
bumfire Posted November 26, 2010 Posted November 26, 2010 (edited) Do NOT fit onto my new Audio Technica ATH-A700's :( Things would of been the bomb had the Track Clip Pro fitted onto them. Sadly I will just have to use my new cans for music and movies and other games and keep my Technics RP-F350 for flying with as I have attached the TCP to it and zip locked it into position, so it isnt coming off of them in a hurry. Works with Technics RP-F350 Doesnt work with Audio technica ATH-A700 Edited November 26, 2010 by bumfire
Barrakooda Posted November 26, 2010 Posted November 26, 2010 Fully compatible with Beyerdynamic DT234 pro. I clip it to the left hand side, same side as mic & works well. Does not interfere with mic at all
mrsparkle1811 Posted November 26, 2010 Posted November 26, 2010 Do NOT fit onto my new Audio Technica ATH-A700's :( Things would of been the bomb had the Track Clip Pro fitted onto them. Sadly I will just have to use my new cans for music and movies and other games and keep my Technics RP-F350 for flying with as I have attached the TCP to it and zip locked it into position, so it isnt coming off of them in a hurry. Works with Technics RP-F350 Doesnt work with Audio technica ATH-A700 I am able to attach it to my Audio Technica ATH-AD700's on the metal band above the cans. I know you have the ATH-A700's, but they are pretty similar in design to the AD700's.
bumfire Posted November 29, 2010 Posted November 29, 2010 Oh, never tried attaching it to the bands at the top, I just tried attaching it to the chunky plastic bit at the bottom. Does it fit ok and more to the point, does the tir unit have no problems seeign the lights ? cuz I am looking at my set now and by the looks of it, if i attach it, i am not sure if the lights will be how they should be aligned, if you know what i mean, cuz the 2 top moveable head pads would come into contact with it. the ad700s have the same setup as me, so if you have it working it should work on mine, but tbh I just cant see it without a struggle. any chance of posting a pic to see what it looks like on your ones ?
mrsparkle1811 Posted November 30, 2010 Posted November 30, 2010 Will try and post a pic later but I can tell you it definitely works. You will need to make sure the clip is not expanded to fit a thicker headset otherwise the clasp will not close. You then simply use the clip hinges to get the right angle / height. Give it a go. You can always run a test in the software to see how it tracks. Like you, I love my Audio Technicas and would have made a mod to the clip if necessary to make it fit.
bumfire Posted December 1, 2010 Posted December 1, 2010 I will give it a try and see, but I am still doubtful, but I guess there is one way to find out :)
GriffonBR Posted August 20, 2012 Posted August 20, 2012 Guys, sorry to dig deep here, but instead to create a new topic, I think that I could use this one too. Do you think that a track clip pro, could be attached on a Corsair HS1? Thanks for the help. Intel 8700K@4.7ghz(all cores) / 32Gb DDR4 /WD Black SN750 Heatsink 500gb (DCS Only) / MSI GeForce RTX 2070 GAMING Z 8G / Windows 10 PRO / VPC WarBRD Base + Warthog Stick + Foxx Mount / Thrustmaster TPR pedals / Thustmaster MFD / Thrustmaster Warthog throttle + Monstertech chair mount
allygash Posted November 30, 2012 Posted November 30, 2012 i cant get my clip to fit on my Corsair 2000 wireless cans... appears the side is too thick and wide. I use a rubber band, crude but works...
Arctic Posted February 1, 2013 Posted February 1, 2013 TrackClip Pro is compatible with Sennheiser 323d, too.
AceKng1 Posted February 3, 2013 Posted February 3, 2013 The clip fits great on my Turtle Beach X12 headset.
-MadCat- Posted February 4, 2013 Posted February 4, 2013 Perfectly works on : - AKG K-518 DJ - AKG K-242 HD (almost exclusively using it with these headphones) Fits on : - AKG K-701 (yet, due to the design, the clip sits rather high above the ear (lower LED at about eye level)) Link -> Stateful button commands for many DCS modules
JaseGill Posted February 4, 2013 Posted February 4, 2013 Fits great on my wireless Turtle Beach X42's J Rig: Home Built, water cooled,i5 2500K @ 4.3Ghz, ASUS P8P67Pro Mobo, 8GB Patriot Viper 2 Sector 5 RAM, MSI Nvidia GTX970 4GB Gaming OC, 120GB OCZ Vertex 2e SSD Boot, 120GB OCZ Vertex 2e SSD Games (BS & WH), Samsung Spinpoint F3 1TB other, Samsung UE37D5000 37" LED TV,EloTouch 1600x1200 secondary, Thrustmaster Warthog No.467, Thrustmaster MFD, Saitek Pro Pedals, Track IR4 with Track Clip Pro. Ex RAF Aircrew, Real Life Pilot, proud Geek and father of one :)
Lorimer Posted February 4, 2013 Posted February 4, 2013 Perfect fit with my Creative SoundBlaster Tactic3D Alpha
tietze Posted February 10, 2013 Posted February 10, 2013 Fits nicely on Ultrasone DJ1 Pro. Please fix the KA-50 bugs :-) Black Shark: Controller profile & setup, TrackIR profile, pit. Warthog HOTAS: Lubing the stick and extending the stick. Posts on howto customize switches in DCS & . Must-have mods for DCS World and KA-50 (mostly JSGME). Casual couch pilot, watching capped.tv...
Recommended Posts