SkateZilla Posted April 14, 2016 Posted April 14, 2016 (edited) As I Posted Previously, w/ SteamVR: w/ 1 7970 GPU, SteamVR Said I was "capable", w/ 2 I was in the lower section of "Ready", w/ 3 GPUs I was peggged to the edge of "Ready", The Rendered Frames was a difference of about 700 Frames. so the 2nd GPU didnt do much but add maybe a lil less than 10% more Frames Rendered, the 3rd added another 500 or so, however the quality of the rendering increased. 1 GPU: 9,007 Frames (Med/Low Quality) 2 GPU: 9,717 Frames (High Quality) 3 GPU: 10,020 Frames (Very high Quality) Also, AFAIK,. the Oculus Runtime Does not Support SLi, Crossfire, or nVidia Optimus (GPU Switching). Here's to hoping Oculus themselves integrate Per Eye/SplitScreen/Side By Side multi-gpu rendering. DX11 Supports it, so It's a matter of integrating into the Actual Oculus SDK and Runtime. Not sure if DCS will Run Multi-GPU direct to Rift, Will check my GPU's This weekend. (Adapter was Left in my Mailbox a Day early, but I am working long shifts the next 2 days) So the Biggest Beefiest Single GPU is Recommended, along with a CPU w/ Single Thread/IPC Hgih Enough to Manage and Process the Doubled Up DirectX 11 Commands. Once Both Manufacturers release their new GPU's this summer, I'll hit up clearance to upgrade to a Fury or FuryX Likely, as the HBM will greatly help w/ VR. Edited April 14, 2016 by SkateZilla Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs
DerekSpeare Posted April 14, 2016 Posted April 14, 2016 My PC scored an 11 on the Vive test and passed the Oculus test as well, but there are still times when in DCS that the frames get bogged down to < 40 over dense "urban" areas. I wonder if implementing SLI and Multi/Hyperthreading could help! Derek "BoxxMann" Speare derekspearedesigns.com 25,000+ Gaming Enthusiasts Trust DSD Components to Perform! i7-11700k 4.9g | RTX3080ti (finally!)| 64gb Ram | 2TB NVME PCIE4| Reverb G1 | CH Pro Throt/Fighterstick Pro | 4 DSD Boxes Falcon XT/AT/3.0/4.0 | LB2 | DCS | LOMAC Been Flight Simming Since 1988! Useful VR settings and tips for DCS HERE
ED Team NineLine Posted April 14, 2016 ED Team Posted April 14, 2016 My PC scored an 11 on the Vive test and passed the Oculus test as well, but there are still times when in DCS that the frames get bogged down to < 40 over dense "urban" areas. I wonder if implementing SLI and Multi/Hyperthreading could help! SLI is in works. Forum Rules • My YouTube • My Discord - NineLine#0440• **How to Report a Bug**
SkateZilla Posted April 14, 2016 Posted April 14, 2016 My PC scored an 11 on the Vive test and passed the Oculus test as well, but there are still times when in DCS that the frames get bogged down to < 40 over dense "urban" areas. I wonder if implementing SLI and Multi/Hyperthreading could help! Pretty sure both tests are generic and actually state per application performance may vary. Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs
Corbett1403 Posted April 14, 2016 Posted April 14, 2016 This is another fantastic review again seems Oculus is more refined if the two companies came together they could make one amazing headset with all the features of both. Sent from my iPad using Tapatalk
SkateZilla Posted April 14, 2016 Posted April 14, 2016 This is another fantastic review again seems Oculus is more refined if the two companies came together they could make one amazing headset with all the features of both. Sent from my iPad using Tapatalk This review has been posted in this thread at least 5 times already, lol. :joystick: We need a VR Headset Emoji.:pilotfly: Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs
DerekSpeare Posted April 14, 2016 Posted April 14, 2016 This review has been posted in this thread at least 5 times already, lol. :joystick: We need a VR Headset Emoji.:pilotfly: QFT - among other things... Derek "BoxxMann" Speare derekspearedesigns.com 25,000+ Gaming Enthusiasts Trust DSD Components to Perform! i7-11700k 4.9g | RTX3080ti (finally!)| 64gb Ram | 2TB NVME PCIE4| Reverb G1 | CH Pro Throt/Fighterstick Pro | 4 DSD Boxes Falcon XT/AT/3.0/4.0 | LB2 | DCS | LOMAC Been Flight Simming Since 1988! Useful VR settings and tips for DCS HERE
Corbett1403 Posted April 14, 2016 Posted April 14, 2016 I thought this was a new review as it only came out on the 11th April iv seen other review done by these guys before on this thread this is an update of that review really goes into more depth Sent from my iPad using Tapatalk
SkateZilla Posted April 14, 2016 Posted April 14, 2016 QFT - among other things... Which QFT are you referring to?, there's 3 Defi's now. Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs
DerekSpeare Posted April 14, 2016 Posted April 14, 2016 This review has been posted in this thread at least 5 times already, lol. We need a VR Headset Emoji.:pilotfly: Which QFT are you referring to?, there's 3 Defi's now. This review has been posted in this thread at least 5 times already, lol. - Yes, hence another reason to support a VR subforum We need a VR Headset Emoji. - I'd fear then, that TrackIR people would want one, too...then we'd have cats and dogs living together in no time... I'm just happy to have DCS working with the Oculus v1.3 runtimes. It's really great to have it, and gives such a wonderful user experience. I look forward to the improvements as they come! Happy flying! :pilotfly: Derek "BoxxMann" Speare derekspearedesigns.com 25,000+ Gaming Enthusiasts Trust DSD Components to Perform! i7-11700k 4.9g | RTX3080ti (finally!)| 64gb Ram | 2TB NVME PCIE4| Reverb G1 | CH Pro Throt/Fighterstick Pro | 4 DSD Boxes Falcon XT/AT/3.0/4.0 | LB2 | DCS | LOMAC Been Flight Simming Since 1988! Useful VR settings and tips for DCS HERE
SkateZilla Posted April 14, 2016 Posted April 14, 2016 This review has been posted in this thread at least 5 times already, lol. - Yes, hence another reason to support a VR subforum We need a VR Headset Emoji. - I'd fear then, that TrackIR people would want one, too...then we'd have cats and dogs living together in no time... I'm just happy to have DCS working with the Oculus v1.3 runtimes. It's really great to have it, and gives such a wonderful user experience. I look forward to the improvements as they come! Happy flying! :pilotfly: You're in the VR Subforum. Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs
ED Team NineLine Posted April 14, 2016 ED Team Posted April 14, 2016 [/i]- Yes, hence another reason to support a VR subforum You do realize you are posting in a subforum right now.... dont you?? Forum Rules • My YouTube • My Discord - NineLine#0440• **How to Report a Bug**
DerekSpeare Posted April 14, 2016 Posted April 14, 2016 well goodness...now I want a button box emojii, too...what a morning this has been... Derek "BoxxMann" Speare derekspearedesigns.com 25,000+ Gaming Enthusiasts Trust DSD Components to Perform! i7-11700k 4.9g | RTX3080ti (finally!)| 64gb Ram | 2TB NVME PCIE4| Reverb G1 | CH Pro Throt/Fighterstick Pro | 4 DSD Boxes Falcon XT/AT/3.0/4.0 | LB2 | DCS | LOMAC Been Flight Simming Since 1988! Useful VR settings and tips for DCS HERE
Corbett1403 Posted April 14, 2016 Posted April 14, 2016 Il shut up now my mistake lol Sent from my iPad using Tapatalk
bart Posted April 14, 2016 Posted April 14, 2016 (edited) Actually I took his comments to be asking if his system would be good enough for Rift and running DCS World, I know he is a DCS World player, so makes sense... in that case of course that is on topic here. You can lay off the comments about moderation as well. If you have issues you can PM me or someone else on the moderation team. 1.3 Administrative actions against forum members are not subject to public discussion. If you feel an action against you was unjust or otherwise inappropriate, please use the Private Messaging (PM) system to appeal the action to other forum staff members or the forum administrator. Thanks SiTh.....yes, my CV1 would be used exclusively for DCS. Cheers guy's, some really good answers here, thanks a lot. EDIT I just ran the Steam VR test and all checks out :) However I will have to upgrade and install more USB 3.0 ports as I only have 3 at the moment. and another issue... Their Compatibility Tool is Super Strict, Like Extremely Strict. On that note, the MAJOR Issue that alot of people are runnning into is USB3 controllers, ASMedia and Eltron are extremely problematic, Eltron USB3 drivers will blue screen your system either immediately after you plug in the HMD, or it will lock up the driver and you're system's USB3 ports will no longer detect devices as they are attached or removed, and eventually blue screen when the driver times out. When I ran the test on the OR site it also flagged up about my USB's it's response was..... "Renesas Electronics USB 3.0 Host Controller" now I'm not sure what this is but if I added an extra PCI-E USB card to get some extra USB ports, would this eliminate the issue? Excuse my ignorance on PC hardware, I can get by on the usual stuff but this is getting a bit cloudy now!! Edited April 14, 2016 by bart System :- i7-12700K 3.6 GHz 12 core, ASUS ROG Strix Z690-A Gaming, 64GB Corsair Vengeance RGB Pro 3200MHz, 24GB Asus ROG Strix Geforce RTX 3090, 1x 500GB Samsung 980 PRO M.2, 1x 2TB Samsung 980 PRO M.2, Corsair 1000W RMx Series Modular 80 Plus Gold PSU, Windows 10. VIRPIL VPC WarBRD Base with HOTAS Warthog Stick and Warthog Throttle, VIRPIL ACE Interceptor Pedals, VIRPIL VPC Rotor TCS Plus Base with a Hawk-60 Grip, HP Reverb G2.
whitav8 Posted April 14, 2016 Posted April 14, 2016 Thanks very much for the VR subforum creation!! Dave PC HW 9700K@5.0Ghz Win 10 (Build 2004 ) with WMR VR - Reverb RTX2070 with Nvidia 451.48 DCS 2.5.6 (latest)
ED Team NineLine Posted April 14, 2016 ED Team Posted April 14, 2016 Thanks very much for the VR subforum creation!! Dave This thread is huge, messy and old, I am gonna close it, feel free to open a new topic to discuss anything VR in relation to DCS in the new section. Thanks guys. Forum Rules • My YouTube • My Discord - NineLine#0440• **How to Report a Bug**
Recommended Posts