All Activity

The files that you install or uninstall are located in DCS <root folder>\Mods\Aircraft. If the module's folder that you just uninstalled, are still there with any content, you can fully delete them without harm to your installation. IIRC, when you command for a module uninstall, those files at DCS <root folder>\Mods\Aircraft are deleted. Do not confuse with necessary files for displaying a unit properly inside "Core Mods" folder. Everyone need those file to be able to fight against and fight alongside with the unit in the simulator environment. Note: <root folder> - Wrote it because that file name is customizable and it goes by default as DCS World, but I'm not fully sure because it is been a long time since I've installed DCS from scratch.

Nice. Glad to have helped.

на пику вышел новый родной стриммер ПикоКоннект 10.6.6,где пофиксили лаги в OpenXR,который там работает без стимВР. https://github.com/owomushi/Pico-Connect/releases теперь не только VD нормально р аботает с игрой

ага,понял.Так и подумал тогда.

Thanks guys for taking the time to write. I know it is only a few GB of data but even a few KB is too much if I don't need it. I am asking how to fully uninstall a module properly that wont break my DCS.

АААА!!! "The Forest" используют маньяки-расчленители для своих тренировок

This is the F/A-18C bugs forum. F-16 bug reporting forum is over here https://forum.dcs.world/forum/333-bugs-and-problems/

Sniper doesn't have "issues"; it's Lightening that has the problem now, as it should be downgraded, but that's a completely different topic and not for this thread. I completed the entire campaign (except for mission 13) with the Sniper. It's obviously more difficult then, and better guidance with more data would probably be useful at times, but as you can see, it's possible to complete 12 missions with the AAQ-33 . Fortunately, we can rearm ourselves if someone wants to use more difficult optics ;). Cheers!

First of all, not very proficient in the harrier but i did fire mavs before and now like couple of days later i can't.. 1. master arms ON 2. Pick Mavs from STORE 3. double aft sensor select to get DMT running in TV ok.. 4. find target, designate so DMT stays on target 5. sensor select FWD to select irvm mode for mavs 6. lock the target as i aproach ever so closer 7. nothing happens i can't fire the missiles.. cant fire mavs.trk

I noticed that despite the fact that the wind is in the runway direction, if 25L/07R has the same ILS frequency, there is an interference, so I set up the "modern frequency for the 07R so it's fully usable. here is my beacons part of Frankfurt --LOC 07L { display_name = _('Frankfurt'); beaconId = 'airfield163_20'; type = BEACON_TYPE_ILS_LOCALIZER; callsign = 'RHM'; frequency = 110100000.000000; position = { -443583.906250, 100.000100, -851177.812500 }; direction = -100.841391; positionGeo = { latitude = 50.047996, longitude = 8.598907 }; sceneObjects = {'t:73852303'}; chartOffsetX = 4593.000000; }; --GS 25R { display_name = _('Frankfurt'); beaconId = 'airfield163_27'; type = BEACON_TYPE_ILS_GLIDESLOPE; callsign = 'DLF'; frequency = 109500000.000000; position = { -443643.500000, 100.000100, -851917.625000 }; direction = 78.659744; positionGeo = { latitude = 50.046376, longitude = 8.588953 }; sceneObjects = {'t:214099125'}; }; { display_name = _('Frankfurt'); beaconId = 'airfield163_2'; type = BEACON_TYPE_AIRPORT_HOMER; callsign = 'FR'; frequency = 297000.000000; position = { -442648.875000, 128.143317, -844779.937500 }; direction = -101.576053; positionGeo = { latitude = 50.065653, longitude = 8.684068 }; sceneObjects = {'t:73862380'}; }; --GS 25L { display_name = _('Frankfurt'); beaconId = 'airfield163_30'; type = BEACON_TYPE_ILS_GLIDESLOPE; callsign = 'FFM'; frequency = 110700000.000000; position = { -444321.468750, 100.000100, -852673.437500 }; direction = 81.530965; positionGeo = { latitude = 50.039301, longitude = 8.580205 }; sceneObjects = {'t:214090990'}; }; --LOC 07R { display_name = _('Frankfurt'); beaconId = 'airfield163_24'; type = BEACON_TYPE_ILS_LOCALIZER; callsign = 'IFSE'; frequency = 110950000.000000; position = { -444262.406250, 100.000100, -851914.812500 }; direction = -100.825012; positionGeo = { latitude = 50.040944, longitude = 8.590415 }; sceneObjects = {'t:73852304'}; chartOffsetX = 4222.000000; }; { display_name = _('Frankfurt'); beaconId = 'airfield163_5'; type = BEACON_TYPE_AIRPORT_HOMER; callsign = 'FW'; frequency = 382000.000000; position = { -445875.125000, 90.751128, -863257.500000 }; direction = -118.128176; positionGeo = { latitude = 50.009882, longitude = 8.439541 }; sceneObjects = {'t:73828942'}; }; { display_name = _('Frankfurt'); beaconId = 'airfield163_6'; type = BEACON_TYPE_TACAN; callsign = 'FFM'; frequency = 114200000.000000; channel = 89; position = { -443403.843750, 118.535061, -848339.000000 }; direction = -12.414079; positionGeo = { latitude = 50.053775, longitude = 8.637223 }; sceneObjects = {'t:215810048'}; }; --GS 07L { display_name = _('Frankfurt'); beaconId = 'airfield163_21'; type = BEACON_TYPE_ILS_GLIDESLOPE; callsign = 'RHM'; frequency = 110100000.000000; position = { -444432.531250, 100.000100, -855199.875000 }; direction = -97.789724; positionGeo = { latitude = 50.034575, longitude = 8.546010 }; sceneObjects = {'t:212951504'}; }; --LOC 25R { display_name = _('Frankfurt'); beaconId = 'airfield163_28'; type = BEACON_TYPE_ILS_LOCALIZER; callsign = 'DLF'; frequency = 109500000.000000; position = { -444506.750000, 100.000100, -855987.625000 }; direction = 79.143587; positionGeo = { latitude = 50.032752, longitude = 8.535441 }; sceneObjects = {'t:73846094'}; chartOffsetX = 4591.000000; }; --LOC 25L { display_name = _('Frankfurt'); beaconId = 'airfield163_29'; type = BEACON_TYPE_ILS_LOCALIZER; callsign = 'FFM'; frequency = 110700000.000000; position = { -445112.812500, 100.000100, -856363.250000 }; direction = 79.197225; positionGeo = { latitude = 50.026870, longitude = 8.531721 }; sceneObjects = {'t:73835198'}; chartOffsetX = 4222.000000; }; --GS 07R { display_name = _('Frankfurt'); beaconId = 'airfield163_23'; type = BEACON_TYPE_ILS_GLIDESLOPE; callsign = 'IFSE'; frequency = 110950000.000000; position = { -445032.750000, 100.000100, -855591.500000 }; direction = -99.485803; positionGeo = { latitude = 50.028721, longitude = 8.542056 }; sceneObjects = {'t:212951505'}; }; { display_name = _('Frankfurt'); beaconId = 'airfield163_11'; type = BEACON_TYPE_AIRPORT_HOMER; callsign = 'FFM'; frequency = 320000.000000; position = { -443411.906250, 118.986508, -847382.500000 }; direction = -101.576053; positionGeo = { latitude = 50.055115, longitude = 8.650293 }; sceneObjects = {'t:73862381'}; };

We finally got an update for the Iraq map Great news, and the screenshots look awesome! Thanks @BIGNEWY

Hi There I am flying the F-16C module with the latest DCS 2.9.19.13478 version. My system is Intel i7 with RTX 4060. The Joystick is Saitek X45. The issue is that when the Autopilot is engaged, the ATT HOLD and ALT HOLD mode does not work. The lateral modes works OK. I have a track where I activate the ATT and ALT modes. The flight path marker appears to stabilize but it keeps drifting in pitch. It neither holds the ALT or the ATT. Please see the track and let me know if I am missing anything. Cheers! ALT_PIT_HLD_NotWorking.trk

You might want to stop using the communication menu binding, and start using the correct PTT bindings, unless you have Easy Comms enabled and/or only fly FC modules. Easy Comms is going away, and the communication menu will not let you use the comms menu in the air for FF modules if easy comms is forced off in a mission. Cheers! Sent from my SM-A536B using Tapatalk

So last night, I experienced a glitch where I was going along the taxiway towards the runway. I tried putting on the brakes when I was about to turn for the runway. I couldn't. I checked controls to see if it was assigned to my joystick, and it was. This morning, I tested it again, and it worked. Did anyone have this issue? I mean, I hadn't done anything.

Two A-10s from RAF Bentwaters and an OV-10 from the 601st TACW overfly Sembach Air Base, West Germany. Circa 1985.

Absolutely agree.

Hi all, I have looked for information on the forum but didn't find anything conclusive, do we know yet how the FF module will stack up in terms of sensor and platform performances compared to the FC3 29A ? From what I gathered here and there, the IRST is probably over performing in FC3 do to a larger FOV, but what about the radar (range, sensibility to ECM, etc) ? Same question for the plane itself: it's stated that the same EFM will be used, but was the engine modelling tweaked for instance ? Do we have to expect different aerodynamic behavior in some configurations ? Overall, can we expect the same kinematic capabilities as the FC3 module ? Thanks !

TAlking about dynnamic weather, the last time I used it, some clouds disappeared in the field of view, has it been corrected?

https://www.ebay.com/itm/197656568098

Once again I want to point out massive problems I'm experiencing in multiplayer for quite some time now since one of the last updates, especially on Growling Sidewinder Server. I find it very, very sad that ED does not care about multiplayer at all, which is an important part of the game. The following problems occur every single time: Missiles often don't hit visual targets that should be within the NEZ or the kill is not registered, even with the target not evading Planes disappear or pop up out of nowhere or they lag so massively to the point that they become untrackable Frame time spikes and stuttering en masse The game occasionally freezes completely or crashes to the desktop I'm getting a score for a missile that I've never shot (while I'm on an airfield for example) I have a video here that shows some of the points (frame time spikes, freezing and a target that should be dead but just disappears from DL and visually): What happened after the video: After 30 seconds the freezing stopped and I was still alive and surrounded by enemies. Missiles didn't hit me and I couldn't lock targets that were right in front of me until i switched to the desktop and back to DCS. I should have been long dead, but still was able to get another kill until I was shot down. If this doesn't only happen to me, it could explain why some planes just disappear or pop up out of nowhere or don't get killed by close range missiles for no reason. In a previous thread I had already emphasized this problems 5 months ago! Apparently nothing has changed to a point that DCS became unplayable in multiplayer. Here's another topic on a similar issue: Very similar issue here, now half a year old!!: PLEASE FIX THE DCS MULTIPLAYER, THANK YOU!

А как узнать что Вы не используете DCS для обучения? Или любой из нас ? Мало ли кто для чего практикует навыки в симуляторе. Я уже молчу про то что есть отдельная коммерческая версия на базе DCS которая создана специально для обучения пилотов. И благодаря которой и нам немного перепадает.

New driver is out since yesterday. might be too early to call, but the black screen didn't happen to me again since i upgraded.

Here is a Google Drive download folder for 2.0.1: https://drive.google.com/drive/folders/1z-FHf4QHSaYa9VEBb218i9FgKU8HJzzX?usp=sharing Enjoy, TeTeT