vctpil

Hi, For a training mission, I placed 18 vehicles that must be spawned via a radio call (unable to use static vehicles). They are not moving in single player, but move in multiplayer! I preset the group as follow : 1. ALARM STATE = GREEN state 2. Disperse under fire = OFF (Perform task) 3. Hold I make some research on the forum without results. Is it a know bug of multiplayer ? Thanks, Vincent

I found the solution, for those who are interested : ONCE (Smoke Request, NO EVENT) > > RADIO ITEM ADD FOR GROUP (2, Request Smoke, 1, 1) ONCE (AAV-7 Dead, NO EVENT) > UNIT DEAD (AAV-7) > FLAG ON (2) SWITCHED CONDITION (Smoke activation AAV-7) > FLAG EQUALS (1,1) / FLAG IS FALSE (2) > SMOKE MARKER ON UNIT (AAV-7, RED) / FLAG OFF (1) / FLAG OFF (2) Lines 2 and 3 will be repeated for each unit with a differents flag for each as well. Vincent

Hi, For a training mission, I would like to spot easily a convoy of 5 units by using a radio call to put a smoke marker on one of the unit. If a unit is dead, the smoke should appear on another one. How can I do that? I start with : ONCE (Radio call, NO EVENT) > > RADIO ITEM ADD FOR GROUP (2, Request smoke, 1, 1) SWITCHED CONDITION (AAV-7) > FLAG EQUALS (1,1) / UNIT ALIVE (AAV-7) > SMOKE MARKER ON UNIT (AAV-7, RED) / FLAG OFF (1) From that, I have to cover all possibilities for each units to be dead or alive, which is a huge work. There should be a better option. Thanks for your help, Vincent

Hi, Could you check those points : F/A-18C Part 10 Laser guided bomb page 391/626 - Lower left image label 23 : is it not label 34? - Point 31. : Auto lase when TRIG unbox. Is it not the opposite? I try with TRIG boxed and auto lase is working. Very nice work, keep on going. Vincent Edit : my mistake, auto lase is working with TRIG boxed or unboxed.

Same problem here, reported few days ago :

Yes, I have the problem with the SA-2 too. Hope ED will fix those problem in the next update. Thanks in advance.

Yes, I can confirm the problem. I placed 2 x 4 aircrafts invicible just to test the templates. The SA-6 does not react. If I place only one aircraft, the SA-6 fire the missiles. Thanks to highlight the problem.

I tried again the standard Russian SA-6 with ROE = WEAPON FREE, but that does not work. I am on the Stable v2.5.6.59625.

Yes, I tried, but the missiles still does not fire. Even the manpad in the same group are firing.

Hi, I have created realistic templates of several SAMs batteries, and notice that the SA-6 does not shoot. In the track, I place the standard Russian SA-6 available in the ME and behind, my own template. All other SAM templates are firing, but not the SA-6, despite the missiles are following the targets. I try differents level of AI without success. Track in attached. Stablev2.5.6.59625. Thanks, Vincent SA6 does not shoot.trk

Hi, I would like to add a radio item only for the squadron leader. Any chance to add this function ? Thanks, Vincent

Hi, Following this discussion : The problem was solved, thanks to Stuka from the 4765th by this way : "I downloaded your mission that you posted on the ED forums. The problem is not the 476 objects, it is the mission. The mission you are using is "prepared", and contains files for the A-10. There's a bug in the F-16, where the UHF radio uses the A-10 file for presets. You can see on the DED that the preset is on the wrong frequency To fix: open your mission with your favorite zip program, and remove the folder "UHF_Radio"." Because it is not a problem of the 476th objects, but a UHF issue with the F-16, should it be considered as a F-16 bug ? Thanks, Vincent

This is the fix from the 476th forum, thanks to Stuka : I downloaded your mission that you posted on the ED forums. The problem is not the 476 objects, it is the mission. The mission you are using is "prepared", and contains files for the A-10. There's a bug in the F-16, where the UHF radio uses the A-10 file for presets. You can see on the DED that the preset is on the wrong frequency To fix: open your mission with your favorite zip program, and remove the folder "UHF_Radio".

Radio presets are correct. This is the first thing I have checked.

I tried something different. I set a radio transmission of real ATC to be listen on preset 3 frq 380.050. Stiill with the 476th objects. When I select the preset 3, nothing happen. When I select manually 380.050, I can hear the radio transmission. When I select the preset 3 again, the radio transmission stop. With clean mission without the 476th objects, preset frequencies are working.

Hi, "Are these a/c all in the same mission?" Sorry, I don't understand the question. "Did you make that mission?" Yes, I do. You will find in attached. "What is the actual preset frequency that is giving you a problem?" The preset 15 on 295.4. This frequency works prefectly for Hornet and the Harrier. I con only use this frequency in manual with the F-16, not by preset. And it is the same for any frequencies. TRANS TR-1 to -6.miz

Hi, Something strange is happening when I try to contact the tanker, UHF radio, realistic COMM. When creating a new mission, only a F-16 and a tanker, no problem. When I am using the 476th objects, the tanker cannot be contacted with a preset frequency, but respond when I enter the frequency manually!?! I don't have this probkem with the F/A-C or the AV-8B. F-16CM mission without 476th objects : tanker is responding on preset frequencies F-16CM mission with 476th objects : tanker is NOT responding on preset frequencies F/A-18C/AV/8B mission with 476th objects : tanker is responding on preset frequencies Anybody have the same problem ? Track too big to be posted. Thanks, Vincent

Hi, Tested with the TPOD v4 (OB for the moment), the LSS mode is working well. Vincent

Agree, I would like to revert to the old system, more flexible and easier to use to my opinion.

Hi, I found this post because I have the same problem. the DMT/LST is working but not the TPOD in LSS mode. Maybe because this is the version 1 of the TPOD. I will try tomorrow with the OB version and the version 4 of the TPPOD.

Ah, ok, sorry. COM AFT: Select COMM 2 - JOY_BTN6 COM FWD: Select COMM 1 - JOY-BTN4 Those button are also used as PTT (in reality). Thanks, Vincent

With the same function on my HOTAS Warthog.

Hi, When I play solo with any aircrafts, I can select the COM1 or COM2 ATC menu. When I play multiplayer or host a server, either the menu does not display with the AV-8B or the menu AUTO appears with the F/A-18C. So, I cannot use the ATC menu in multiplayer, and then, not able to refuel. Any idea(s) how to solve this problem ? Thanks, Vincent

You can remove vegetation with the ME by using SCENERY REMOVE OBJECTS ZONE.

Thanks to you to change it to REPORTED.