HOKUM52

i hope a third party does a vulcan bomber. be a novelty i know, but falklands map? iconic AC, return would be good and the legend alone would drag loads of people into the sim. just an opinion though.

Please take the time to read, as I am on the verge of sending it back against my instinct. There are 2 main reasons for this below. I recently received my new Pimax crystal 08/2023, I have attached images of all my settings and computer hardware. 1. Motion blur Experience & immersion is completely spoiled by a motion blur. It occurs whenever I move my head. As said in the first post the picture is only clear if you have your head still.. When moving the head around the cockpit for switches, the motion blur smears the view making everything unreadable until the head is held still again. In my searching for the cure the words persistence blur has come up and I don't know for sure but maybe this is what i'm experiencing. Personally its utterly pointless having a "crystal" clear image but with the ridiculous caveat: only if you keep you head still. At the moment I'm telling myself surely this cannot be how it is for everyone who has a crystal otherwise there would be major complaints out there, it must be my settings/ hardware however I have carefully copied setup guides from youtube and elsewhere specific to DCS with Pimax and even the Pimax support team. As well as this head movement associated blur...It is also blurry to watch other aircraft pass by they often appear as a double aircraft with a ghosting effect, or if I look out the canopy whilst doing a roll for example ... The ground and the whole outside world blurs sooo much. My archaic Rift S did not have the roll problem but did have the ghost aircraft. Either way these two issues are really undesirable. 2. Not edge to edge Clarity I've heard many people speak of edge to edge clarity however this is certainly not the case. Infact only the centre of my image is crystal clear, I estimate 40-50% of the FOV radiating out. If the head is still & you move just your eyes to the edges of the FOV, any Gauge or switch labels around the edge are blurred significantly enough to be unreadable. Interestingly if I close one eye at a time, it seems, for example looking at a right side cockpit MFD.. my right eye sees it clearly (eye looking straight ahead through the lens).. while the left eye sees it blurred.( eye looking across through the left lense) & so whatever edge is looked towards does not have clarity. Whilst the Pimax has a sharp image, great colours & way better performance these new phenomena are not present on an old Rift S. For a headset that cost £1000+ yes its an upgrade in one sense but it has a crippling trade off. Multithreading is being used with open xr+ pimax xr + quad views. Im getting 50-60FPS solid in multiple aircraft flying around. I've condensed all my settings into these images. Computer spec: Processor (CPU) Intel® Core™ i7 Eight Core Processor i7-10700K (3.8GHz) 16MB Cache Motherboard ASUS® ROG STRIX Z490-F GAMING (LGA1200, USB 3.2, CrossFireX/SLI) - ARGB Ready Memory (RAM) 32GB Corsair VENGEANCE RGB PRO DDR4 3200MHz (2 x 16GB) Graphics Card 10GB NVIDIA GEFORCE RTX 3080 1st Storage Drive NOT REQUIRED 1st M.2 SSD Drive 1TB SAMSUNG 970 EVO PLUS M.2, PCIe NVMe

anyone have a guide to what times of day they come on, I have a gen next to each light but they dont come on at 7 am 6 5 or 4am?

Gents how i fixed it, and this is the second time i've done this for such a problem.. Uninstall oculus, try Game-- doesn't work still reinstall oculus try game--completely cured I have no explanation. Had nothing to do with anything else and i dont know why it begun as there were no updates on either DCS or Oculus within a week. This happened once in the past to me about a year ago.

Sorry to drag this one out of the depths. With the sale on im wondering to buy, but wanted to know if 1 year on has it been improved? I like to fly VR when dogfighting, normandy atm is just about good enough to fly on .

hello i have the access violation code also in my logs. My scenario: I have 0 Mods installed and nothing in Mods tech, some skins only in the main folder. Played 1 time after the patch in VR totally fine. quit game 4 days later after NY i start game, (not been touched since) and now crashes when loading anything or any map at :terrain init, 1: how do i fix the Violation code thingy ("That means that your program is accessing (either reading or writing) a memory address to which it does not have rights") from the quote above? Slow repair done, removed all skins it found, still crash at same point! dcs.20210414-182842.crash

Thanks for the tips guys, but I know for sure this has worked in the past and ive made many multiplayer missions this way. When i press: shift @. I can see the score going up by 5 each time i damage one of the 3 vehicles. Yet the trigger condition : mission score higher than 10 never shows its action :message to all "victory" i cant understand why this isnt working anymore

Hello. I'm on the beta. I make sure I test it on multiplayer. I've set up the most basic mission to test. 3 red vehicles unit 1,2,3. In goals 'ive put 5 points for blue for each ( that is e.g. 5,blue : condition unit 1 damaged.... ) and one single trigger, Mission score higher than 10 (blue) : message to all : victory Not working. I made this mission because my more complex missions i've noticed things not working (messages appearing when mission score reached eg) and thought this might be why. I'm fairly certain these missions' triggers worked correctly on the release version, but I removed that now since I got a new rig suffice to say is this not working in beta?

Originally posted in F14B bugs but redirected here. 1. Lantirn pod not appearing on Ac for RIO, some random occasions it has been present but normally it is not visible. RIO can still operate / look through invisible pod. (always RIO Player, whether client or host) 2. GBU-12 on occasion completely misses target even though it seems to start tracking the laser. yet for other player the bomb stays on target hits and destroys. It has gone both ways such that pilot sees target hit and RIO sees a miss, but also RIO sees a hit and pilot sees a miss. 3. Perhaps more a DCS world bug, but vehicles groups that disperse when under fire move from original position (pos A) to new position (pos B). For the host this is what is seen, however the client is seeing no movement and vehicles are still in pos A. This plays out differently from bug 2 which is just a wild miss. In this scenario if the RIO is the client he will target the vehicles as they appear to him in pos A, but since they moved it looks to the pilot that the RIO is just targeting some random ground. and .. when the bomb lands for the RIO he sees a hit on target and kill, for the pilot he sees a miss but yet still the vehicle is killed.? Kind regards Pat

1. Lantirn pod not appearing on Ac for RIO, some random occasions it has been present but normally it is not visible. RIO can still operate / look through invisible pod. (always RIO client or host) 2. GBU-12 on occasion completely misses target even though it seems to start tracking the laser. yet for other player the bomb stays on target hits and destroys. It has gone both ways such that pilot sees target hit and RIO sees a miss, but also RIO sees a hit and pilot sees a miss. 3. Perhaps more a DCS world bug, but vehicles groups that disperse when under fire move from original position (pos A) to new position (pos B). For the host this is what is seen, however the client is seeing no movement and vehicles are still in pos A. This plays out differently from bug 2 which is just a wild miss. In this scenario if the RIO is the client he will target the vehicles as they appear to him in pos A, but since they moved it looks to the pilot that the RIO is just targeting some random ground. and .. when the bomb lands for the RIO he sees a hit on target and kill, for the pilot he sees a miss but yet still the vehicle is killed.? Kind regards Pat

I second that. Does it run DCS maxed out with pixel density in VR to 2.0+ Buying a new beast and dont want it to fall short in VR, Kind regards

thanks for response.. is that (only) on beta for the time being?

Hello all Am I missing something obvious here? Is it only in beta? I Could have sworn ive seen some in the past but i cant even filter by Normandy map (see pic) Brother also has identical issue, both purchased WW2 and asset pack recently.

any change on this? would really like to be able to use trackir and aim with the mouse!

bump

Hello, im having a problem with my mission brief pictures. they appear as thou they are high contrast or low gamma? they are all PNG or JPEG files and appear this way in the editor and in game for clients: the brighter colour image is how they should all look. as you can see the night picture is of no use atall. anyone experienced this or know why/a fix many thanks Pat

any new info on this? any general consensus forming, about to buy a completely new rig i7-8700k 3.7- 4.9GHz 32GB RAM 1tb SSD and now im stuck with 1080 x1 or 1080 SLI!! Would one 1080 be sufficient to achieve 60fps with that spec?

Hi this really concerns me as im about to buy a new laptop that has almost the same specs - SLI 8th Generation Intel® Core™ i9-8950HK Windows 10 Home 64bit English 32GB DDR4-2666MHz, 2x16GB NVIDIA® GeForce® GTX 1080 OC with 8GB GDDR5X now Im pretty worried its not gonna run the game flawlessly as i would expect especially when i consider how much its costing me. No one seems to have any info on how this core performs. Do you get 60fps on the release version because im not really interested in the beta??

Hi all, About to buy a new laptop, but this time I'm future proofing it by making no compromises. Gonna cost a lump of gold but the specs are as follows: Alien ware 17" 8th Generation Intel® Core™ i9-8950HK Windows 10 Home 64bit English 32GB DDR4-2666MHz, 2x16GB NVIDIA® GeForce® GTX 1080 OC with 8GB GDDR5X My quesie is: Has anyone tried this kind of processor out with 2.5? Its 6 core 5GHz and it will kick the arse out of modern games but remains a concern because I know DCS prefers fewer cores (the old dcs at least). I really want this to run dcs flawlessly now and into the future! and at this price I cant make a mistake!! It very difficult to find custom laptops which allow older generation core in them now so this is pretty much the newest/top processor out there.

Any news on this because i really want to host a missions i have made for me and my friend and cannot since 1.5.8 came along, 1.5.6 same issue. 1.5.7 it was working

Hello, i was pleased to finally have version (1.5.7) where my friends could finally discover my sever again but it seems after the 1.5.8 update its back to this again?? please tell me there was a fix in the end Predattak?

Hi Hope your problem is fixed, however rather than post a new thread I believe I'm suffering from same problem. I've attached the check that keeps coming up, thing is I cannot find these files anywhere in anything related to DCS on my computer so i cant delete them. Also they dont always come up, sometimes its just some of them. Please any advice because i'm sick of being called a tainted client!!

thank you, it was the admin permission.

Hi This error message comes up whenever I try to save anything. I currently have to make missions on different computer. message is strange aswell.

I also have problem as sever host i could not use radios, but client could :S