-
Posts
40 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by Redeye
-
Hey Deltaalphalima1 I received the unit today. Should have waited one more day before contacting you. Tab"Redeye"Harris
-
Merry Christmas everybody and a happy 2019!
-
PointCTRL - Finger Mounted VR Controller
Redeye replied to MilesD's topic in PC Hardware and Related Software
Please add me to the list.- 3388 replies
-
- virtual reality gloves
- vr flight simulation
-
(and 2 more)
Tagged with:
-
Order #1447
-
I tried the shapeways detent but found it too hard to push through for formation flying. I could shave it but ... I use the original WH detent in the no detent position but first i put a toothpick under it. This lifts the detent up and gives a slight bump. Mine hits at mil power and is a easy push through without lifting. Experiment with different thickness of whatever you have around. Note: there is less material making contact in the no detent position.
-
RIP Igor. Thank you for DCS world!
-
I had to change the keystrokes for 2 of the sensors. I think they were Lwin+Y and LWin+U. All other sensor keystrokes worked fine. I now use LShift+Y and LShift+U and all is good.
-
Position yourself the way you want then hit numpad 5 to reset your view.
-
Check the AV8BNA Pocket Guide.pdf located in your install folders. C:\Program Files\Eagle Dynamics\DCS World 2 OpenAlpha\Mods\aircraft\AV8BNA\Doc Look at page 7 item 7. The Throttle Cutoff Lever is hidden between the parking brake and throttle.
-
Here is the thread on how to roll back to different versions of DCS. https://forums.eagle.ru/showthread.php?t=114030
-
is it possible to fly with a recorded track?
Redeye replied to muse458's topic in User Created Missions General
Check this out. https://forums.eagle.ru/showthread.php?t=152612&highlight=phantom+control -
Andre When everything fails .... read the instructions again. Everything is working like it should. Thank you.
-
I will try a DCS module but i get this error before i get a chance to select an aircraft. And the last error (small one) after i exit DCS.
-
I recieved my jetseat and i have a problem. I tested and all works on massage but i'm getting an error when trying in DCS.
-
A question regarding JetSeat Sim Edition
Redeye replied to =Andre='s topic in PC Hardware and Related Software
Dark Olive Order Reference BTXQIKAUZ - placed on 02/19/2017 Tab Harris -
Andre I'm trying to purchase from Canada but can't. It keeps defaulting to (country) USA. Please help!
-
My first flight with Rift was about 20 minutes in DCS and i was sick for 2 days. After a few days off i tried again only this time i leaned my head back until i touched the headrest on my seat. This felt so much better! It gave me a feeling of stability that almost eliminated the problem. Hope this helps someone.
-
Can't save the new settings. Open game and check the Options / Misc / and make sure the "User Snap-View Saving" has a check in the box.
-
Serial # 01691 Location: Vancouver B.C. Canada
-
Hello guitus ... hope this helps. Record Track: Use the record track function in Lock-On to record your flight and remember the original mission file used. After the flight, name your track. The name will identify the date, description of flight, pilot name and original mission file used. Example: 20080615_LoopsRolls_Pilot name_Raz05.trk (recorded flight) Now close Lock On. Trace the track: Open phantom control and select the trace radial only, everything else off. Close phantom control. Re-open Lock-On and PLAY (not fly) the track to be traced. Don’t touch anything or change any views, just let it play. After its finished, close Lock-On, re-open phantom control and hit the convert button to bring up a save window. Name it the same as the .trk and hit save. (It may take a few seconds)Then turn off the trace radial and close the program. The phantom track is saved in the Lock-On / temp folder. You should now have 2 files which are named: 20080615_LoopsRolls_Pilot name_Raz05.trk (original Lock On recorded track) 20080615_LoopsRolls_Pilot name_Raz05.phtrk (traced phantom track) To playback phantom track. Open phantom and hit the backslash button to bring up the saved window. Select the .phtrk track you want to play. Now select the PHANTOM radial and hit the USE button, close the phantom control program. Open Lock On and select the NETWORK PLAY button. Hit the server button. This will allow you to choose the original mission that your recording was made from. This is very important because it spawns the phantom aircraft in exactly the same position as when it was recorded. Join and select the #1 jet. Hit the FLY button to start the multiplayer flight. More information here including how to add voice over to your tracks using ventrilo.
-
Thanks Raven. I'll try to figure what these last 2 are: Silence = 0.01; Size = 100;
-
The following line is a example from the Sound.cfg sound file. PlaneWind { Mode3D = true; Loop = true; Front = false; Inside = 180; Outside = 180; Volume = 3.0; Silence = 0.01; Size = 100; Radius = 3000; Group = "Wind"; } Can anyone explain what these parameters mean for practical use? Mode3D = true; Loop = true; Front = false; Inside = 180; Outside = 180; Volume = 1.0; Silence = 0.01; Size = 100; Radius = 1000; Group = "Wind";
-
Find the Tutor model for LOMAC here: http://www.virtualsnowbirds.com/downloads/ Made for Flamming Cliffs with 1.12a update.