Azrayen

Hum... Pour être précis : ce n'est pas exactement la même version du moteur graphique (T3 pour la 1.5, T4 pour la 2.0). ED travaille pour rendre le Caucase pleinement compatible avec le moteur T4. Lorsque cela sera fait, DCS 2 quittera le statut de version de test et comprendra l'ensemble du contenu de DCS. La situation actuelle est donc temporaire. Par la suite, il y aura sans doute un moteur T5 pour le détroit d'Ormuz et/ou Normandie 1944. Rebelotte probable à ce stade ;)

Crap. Again? :( Hopefully this one isn't so bad (less powerful).

Those pods are heavy and draggy. And you're not supposed to go supersonic with AG weapons, IIRC... So unless you have better explaination or source, I think it's normal/not a bug ;)

Verify "easy comms" DCS option. It must be unchecked to be able to tune radios yourself. ++ Az' PS : it's "Pal+G", short for Principal+Garde i.e. Main(freq tuned)+Guard.

One "click-click" on the AP standby trigger is the most immediate way to do it IRL. If you have mapped this (very useful) control (and you should!), do the same ;) = = = = = = = For non-French readers, in general: DECOL is short for Décollage, which means Take-Off. So this red warning is the "take-off configuration" warning. As such, it tests a number of things. Only if all are OK will the light go out. Sometimes, at landing, the warning will be triggered. This has to be expected. Most obvious cases are: - manual trim off center - slats manually set out (in case of engine troubles). ++ Az'

Yes, this is more or less what is said in the linked topic :)

Anyone got any track? ;) PID lock is known defective. http://forums.eagle.ru/showthread.php?t=166810 We should wait for next update/fix, and in the meantime use PIC exclusively.:book:

Don't remember honestly. Wasn't paying attention.

Well, I shot my first rockets with the M-2000 a bit earlier, while replicating the bug from OP description, and they landed precisely on that poor electric station :D

@ PiedDroit: Given the texture of the PPA (with a white line separating the zone with G/AUTO/D + P/MISS + AUTO/MAN and the zone with P/MAG) I guess you're probably right i.e. the G/AUTO/D applies only to S-530D IRL. But there probably is another way for the pilot to select which Magic he wants to shoot. Since there seems to be no available data on how this is done, my opinion is that making the G/AUTO/D switch manage both the S-530Ds and the Magics - as Razbam indend to do if I correctly understood - is probably the best option. :) Regarding the AUTO/MAN switch, my understanding is that it was wired for the RDM only. No feature on the RDI for this. ++ Az'

Mhmm, I understand. But I don't like it. I prefer to learn the correct way already (even if not the most practical at the moment because of beta status) rather than learn (advice) a different way that only works because of the module current state. That other way will have to be unlearnt eventually...

I know that. My reacting was because you propose to use "Magic II SELECT" when there already is a "Cannon SELECT" control that is better suited. "Magic II SELECT" is not really a "cycle" control at the moment in DCS; it may look like one because currently with master arm up, guns is the default mode. ;)

(a bit lightened in photoshop) (the night is dark and full of terror)

Me too. Little problem in the FM in the current 1.5.3 OB. => fix incoming probably next time ;)

Yeah, this should not be. PCA only for AG. And no K1/K2. That's the WIP part. Ahem... Typo?

It's a way to shed load on update servers. Been there since 1.2.1 i.e. the first updater-equipped version of DCS World.

Thanks, reproduced and reported. It's not a mis-use, by the way. Perhaps the pylons are not the good ones (?) (didn't check) but it's OK to have up to 4 rocket pods i.e. using internal and external wing hardpoints. By the way, no CTD if (external) rocket pods are expended. And FWIW, your loadout is unrealistic: IRL M-2000C can only manage one type of air-to-ground weapons at the same time (+ guns) due to ballistic computer limitation. ++ Az'

This is probably WIP, AA and AG guns modes are (should be) different.

Updater wait 24h after last check to check again if a new version is available (unless you force a check with the "update" shortcut/command. So you probably launched DCS shortly before the update. Then it waited 24h after that to check again.

Guys, Regarding maintaining lock: - PIC is now OK - PID is still WIP.

C'est bien une roulette folle.

headlights: Off Taxi Landing ;)

Use a lighter mission (if it was heavy) (just to be sure). Check that airport is your coalition's. Restart DCS host (currently Lotatc server is not able to reload mission, DCS at host should be quitted entirely).

Keep this in your favorites: http://updates.digitalcombatsimulator.com/

Honestly, I don't share your concern. Do you usually start firing missiles within 30" of air-starting a mission? I probably don't.