DieHard

Is Tacview Allowed? I was on your DCS Israel WWII Blue Flag Normandy server last night for about 30 minutes. Afterwards, I ran my Tacview recording for the session shows my Bf-109 in Central England, not in France. Please explain why Tacview did not record me being at the Azeville runway in France? Is Tacview allowed on your server? I do understand why you may not allow it if Tacview is turned off. If it is allowed, any idea what I may be doing wrong so I can record a session? I can record just fine using the "Burning Skies" server.

It is not cheating. It is the way DCS does it.

Bf-109K-4 Real (not easy mode) Options, Special Tab ============= Aileron Trim = +2 Rudder Trim = -20 Takeoff Assistance = 0 I use CH Products of Fighterstick, Pro Pedals, Pro Throttle - all set 100% Saturation I use the CH Control Manager for all my setups. Options, Controls Tab, Axis Commands, Axis Tune =============================== Roll = +10 Rudder Dead Zone = +2 Rudder Curvature = +31 I use my thumb Hat switch on my Fighterstick of Down Pitch and Up Pitch (two separate moves). I figured out my setup by a lot of experimenting and many, many flights over a few months. These settings will get you in the ballpark of a fairly neutral setup, but my hand is always on the stick and feet on the rudder pedals. I am usually flying in 2.1.1 OpenAlpha "Burning Skies" server in MP. Lately feeling out Blue Flag Normandy (DCS Israel server) and also the ACG server. I flew Ka-50 forever. Now just fly the 109. I probably forgot how to fly the Shark; it would come back in a few days on the 104th's server.

I don't know this. I am guessing. And no one answered the question. : https://forums.eagle.ru/showpost.php?p=3225611&postcount=1215 from this thread : https://forums.eagle.ru/showthread.php?t=130161&page=122 I do not know what "the well known common LABELS mod" is. ?? I put this Labels.lua : https://forums.eagle.ru/showpost.php?p=3223589&postcount=1209 from this thread: https://forums.eagle.ru/showthread.php?t=130161&page=121 in my JSGME while going to the "Burning Skies" server and it changed to the one he offered to the one that was there. Again, I don't know, and I am guessing that whatever server I have in Multiplayer while in game, changes to the one being used for that game. If I am wrong about this, please correct me. My post here is how I looked to see the change did happen, while I was in game on the "Burning Skies" server : https://forums.eagle.ru/showpost.php?p=3228973&postcount=1225 from the same thread : https://forums.eagle.ru/showthread.php?t=130161&page=123 I didn't use my C: drive, I used my SSD , but it is basically the same path except for the 2.1.1 OpenAlpha. -+- I don't have formal computer training. I am self taught by reading the various forums, books and trial and error since my Commodore-64 in 1985 as my 1st computer. I don't mind being criticized if I am wrong and / or being stupid as long as I learn something. So if I am wrong about this, please enlighten me.

As to realism... https://forums.eagle.ru/showthread.php?t=179253 Read the 12th paragraph from the top, page 1, as to "spot-on" as to DCS being accurate with their modeling.

I am in NY, USA. Burning Skies server is very active more or less between 2 PM to 8PM my time, most any day, Eastern USA Time Zone. If you fly around, somebody most likely will see you are on and come looking for you. I have seen guys on wee hours early AM my time. Get TacView to prove it. I like to fly around anytime just to find ground targets and get familiar with the terrain and my kneeboard map and the F10 map. Finally figured out how to get Quartermaster's Bf-109 English cockpit mod to work in 2.1.1 is why I have not been around the last month or so. No need, anymore, for JSGME for language translations cockpits.

Where / How do I find the settings? I think I know how. While in game, in MP, whatever server you are using, Left Alt + Tab, bring up My Computer, go to my/your drive letter, my (C: ) Program Files\Eagle Dynamics\DCS World\Config\View\Labels.lua then copy the .lua file. Stash it somewhere. Use JSGME to overwrite the current Labels.lua I think that should work.

Me, too! Very few use it on this server.

Setup a switch to zoom view to infinity in and separate switch to zoom out, that is what I do. I also setup a zoom view closeup to a switch, one setting in Snap Views. There is no excuse to hit friendlies unless that is what you want to do. My TrackIR I set a switch to rapid center my view to neutral and separately a pause button so I can use my snap views. I'm not a big fan of TrackIR as it throws my brain cells too much and disorients me.

Quartermaster's BF-109K4 HD English Cockpit [METRIC] 1.5 & 2.0 ========================================= https://www.digitalcombatsimulator.com/en/files/1749263/ First install Devrim's updated Bf-109 English mod exactly as he instructs. ============================================= https://forums.eagle.ru/showthread.php?t=144456 Then install Quartermaster's mod the same way. I could not get Quartermaster's mod to work in 2.1.1 OpenAlpha. What I did was borrow about half of Devrim's files and added them to Quartemaster's files and substituted Devrim's description.lua for Quartermaster's. Works now! Go to the Bf-109 Special tab to select languages choice. You now have three choices : the default plus Devrim's and Quartermaster's. And it gets by the "Burning Skies" MP server's integrity check. Devrim thank you for your work.

CH_PRODUCTS : Fighterstick , Pro Throttle , Pro Pedals For "Burning Skies" server in MP (Multiplayer) - Version 1.5 - Full Realism (not easy play) ________________AXIS_TUNE for each_______________ ___________Saturation is 100% for everything_________ Pitch = +5 Dead Zone , +30 Curvature , no checkboxes Roll = +5 Dead Zone , +30 Curvature , no checkboxes Rudder = +5 Dead Zone , +41 Curvature, no checkboxes Throttle = Check - Slider Checkbox Engine RPM = Check - Slider Checkbox ___________________TAKE-OFF____________________ Pitch Trim = 100% Fuel = -1 Down Elevator Pitch Rudder Trim = Full Right _____________________NOTES_____________________ This setup is when I 1st purchased it Nov. 3, 2016 on a 20% off sale. These settings are from Feb. 11, 2017 (so, I experimented for awhile what worked best for me) Have not flown the Spit IX in quite awhile. At the time, cannons were not effective. Now, going to see if these settings still work, but using the 2.1.1 OpenAlpha version.

See my Message #75, this thread to hear Jim's musical interests.

Rudel, Thank you

Ironhand, Thanks for your post and your help. In the Saved Games 2.1.1 DCS.openalpha path I installed this download as new installation. The setup sequence establishes the _MOD folder and everything needed to run properly. This is the latest edition I found : https://forums.undeadlabs.com/threads/jonesoft-generic-mod-enabler.39286/ http://www.softpedia.com/get/Others/Miscellaneous/Generic-Mod-Enabler.shtml - JSGME is working in 2.1.1 as this sound mod is working correctly on the "Burning Skies" server : Diveplane's Bf-109 Sound Mod , I got from here: ================================ http://www.****************/files/file/2974-bf109-k-4-audio-production-20/ (Interesting, DCS Forums won't let me link it. I just downloaded it to my desktop, the link works.) If you want it, Google knows. Diveplane has a Facebook page full of goodies DCSW friendly : https://www.facebook.com/Audio-Productions-DCS-World-20-387172828119043/ - Yet, Quartermasters' Bf-109 mod is not working currently within Saved Games (used to work fine) : BF-109K4 HD English Cockpit [METRIC] 1.5 & 2.0 =============================== https://www.digitalcombatsimulator.com/en/files/?arrFilter_pf%5Bfiletype%5D=5&arrFilter_pf%5Bgameversion%5D=244&arrFilter_pf%5Bfilelang%5D=&arrFilter_pf%5Baircraft%5D=149&arrFilter_DATE_CREATE_1_DAYS_TO_BACK=&CREATED_BY=Quartermaster&sort_by_order=TIMESTAMP_X_DESC&set_filter=Filter - I do not think that problem is JSGME but how the Saved Games folder does things, now. - Still experimenting and have found other message postings this month (August 2017) within the DCS modding forums to work through trial and error. At least got over that hurdle. Thank you

Need some help. Been using JSGME a long time in my (C: drive for 1.5.7 in the Stable Version and its OpenBeta. Also been using JSGME in my (M: SSD for 2.0 for quite awhile with no negative issues. And it has been working fine until this last update on August 11, 2017 with the JSGME.exe file located ONLY on my (C: drive. This guy says JSGME still works in the latest 2.1.1 : ================================ https://forums.eagle.ru/showpost.php?p=3219758&postcount=45 Message #45 from here : https://forums.eagle.ru/showthread.php?t=190778&highlight=JSGME I have tried! I am still stumped with no luck, yet. Can somebody show me how: step by step? === Is the issue that I need JSGME.exe also installed in my SSD (M: drive?

Use to work that way... !!

Did you guys find a workaround? I found this but it bypassed my Quartermaster's 109 mod and uses the stock 109. But at least I did not get kicked off the server. https://forums.eagle.ru/showthread.php?t=191886 See Message #8 is how I added the mod ; and separately turned my JSGME off. - https://forums.eagle.ru/showthread.php?t=191357 -+- If DCS is going to change how they now install mods, wish they would be up front about it and show us how to do it the new way without having to dig thru forums to find a fix. _____________________________________________UPDATE_____________________________________ _________________________________FIXED IT; WORKS NOW and NOT A CHEAT______________________

Have been using JSGME for years. So, now JSGME no longer functions as it was designed to do? Using JSGME : Quartermaster's 109 mod does not work on the Burning Skies 2.1.1 server, yet It works fine on F99th's Normandy map in 2.1.1 and a few other WWII servers in 2.1.1

https://www.facebook.com/IdeasForLife2016/videos/496378200701392/ Sorry, do not know how to separate the URL from this Facebook page. Huey must be a really tough helicopter.

She is very good at human figure drawing. She's a keeper. Go get her a nice engagement ring.

At least I am home and she knows where I am! She keeps wanting to teach me how to knit and crochet. I tell her if I ever get bed bound for any length of time, M_A_Y_B_E. (I did hospital as a kid too often, 2 weeks at a time. Back in the 1950's they would actually let me put together plastic aircraft models with that very flammable airplane glue. Doubt that would ever happen today.)

This is Facebook related: ================ https://www.facebook.com/GameByte/videos/1945676845689420/

=========================================== Cleanup_and_Repair (Advanced Method) >>> How-To by BIGNEWY ===========================================

Don't know your specifics. In the past, my experience, new updated patches, every time, the path changes. So for me, I always use JSGME to install / uninstall my mods. I have to manually re-write the folders / sub-folders pathway layout to get each mod to work for each aircraft. With any luck, hopefully the end files in .lua or whatever has not changed. If it has, then I do a forums search per each creator and see what's new on his end. I see my older mods I was recently using are not working in 1.5.7 . So, rinse and repeat as above!

Never realized at the time during Ross Perot's Presidential attempt of his VP choice and the significance of what that meant having Stockdale on his campaign ticket. Not talking politics. Talking integrity.