kobac

One more vote for Ex Yu map. I agree - it should be expanded to the north.

Will there be AI civil traffic from the McCarran int. airport?

I got the same message today. Only the IP address is different 5.9.36.66 Who and what these people want to do with our accounts? Do we need to change our passwords?

No I have not found the cause of defect, and have no solution, MadCatz support is terrible and in my town there was one authorized service center for Saitek, but it is closed and it's gone. There in this forum, nobody told me what could be the cause, so I recently gave up playing DCS.

I know that this is primarily writes about X55 Rhino, but considering that it is the same manufacturer, I want to just draw your attention to this detail - I had problems with X52 and twitching of the Y-axis, and how the warranty period has expired, technical assistance did not want to help me, and says what could be causing the problem. So much for the Saitek / Madcatz.

In the end I'll have to do so. :(

Я проверил все проволоки и электронных цепей с унимером и я не нашел, что где-то есть перерыв.

Я сейчас выполнил проверку джойстикa и на другом компьютере. Он ведет себя так же, как раньше - прыгает.

Я уже пробовал. Вместо передней стороне я включил джойстик к USB порту, расположенный на задней - непосредственно на материнской плате. Кроме того, я купил новый кабель PS2 (который связывает РУД и РУС) и заменил его, но проблема по-прежнему остается.

Привет друзья, прежде всего простите для моего русского языка. У меня есть проблемы с джойстиком Saitek X52, и об этом, я писал в английской части форума, но никто не знал, сказать меня, где неисправность. Я не знаю, как решить подергивание и пожимая проблемы Saitek X52 джойстик. Я думал, что это было проблемой, hall датчиков, но это не так, потому что я заменил их, и это происходит в основном в Y-оси, Как вы можете видеть в этом YT видео. джойстик стоит в одном положении, и стоял там некоторое время, хотя я двигаться палку, а затем внезапно подскочить к конечной позиции. Я писал "MadCatz", но они сказали мне, что они были жаль, что у меня есть проблемы, но они не обеспечивают поддержку для своих продуктов, которые не находятся под гарантии. :helpsmilie:

TY Sokol1 I'll look for that cable which connects throttle and stick. There probably is not cable which leads from hall sensor to the PCB, because I changed positions (swap) sensors and problem remained only on the Y-axis. EDIT: I bought and replaced the PS/2 cable but the problem is not solved, it means it wasn't because of him. I also checked the solder and re-soldered places where wires are connected. It's kind of strange, these twitches most occur in the lower left quadrant, when the stick pulls to myself and left.

Yesterday I wrote Mad Catz technical support with the same question, to tell me what is causing this joystick behavior. They responded to me today that my warranty has expired. I ask you one thing and they correspond completely different :doh: How is it that no one who could determine which electronic component is broken?

I don't believe the problem is related to the weak magnetic field, because error doesn't occur in the other - the X axis, but only in the Y axis. In addition I have put four strong neodymium magnets. I also do not understand much in electronics, but I see, there are some resistors that are located on the PCB. Possible, some of it is not working properly, if only someone could say what or which part is responsible for this behavior joystick, it would be nice. I tried with the taking out and reseating cable from throttle to the stick, but it didn't help, and doesn't solve problem, except for calibration of joystick which is sometimes necessary to do because sometimes happens the cursor is in the lower position - halfway to the end point.

I don't know how to solve twitching and shaking problem Saitek X52 joystick. I thought it was a problem to Hall sensors, but it's not, because I replaced them and it occurs mostly in the Y-axis. See YT video how it welded in one position, and standing there for a while, even though I move stick. Does anyone here know reasons for this problem, and how to solve? By the way this is SaitekX52 hall sensor

I also had a problem with the "connection interrupted" and the previous version (1.2.16.38741) DCSW, but on public servers. That's why I waited this new version. It is necessary to disable all JSGME mods, if you have them, make bkp DCS Folder from C:\Users\user*\Saved Games\DCS to be able to return your settings, and delete it, and then install new version. Later, when you have a clean DCS, check connection, and then back step by step your settings and mods. It worked for me, I hope that you too.

And I'm especially interested for new update, because "Connection interrupted" problems.

I also have this problem. When my buddy running server, then I can connect, but the most public servers I can't. Perhaps installing a new version DCSW solve this problem. I hope that will be announced soon.

Fantastic! DCSW-2 terrain, on these YT videos, looks almost photorealistic. Just don't know how long we have to wait until release of the DCSW-2 public version.

AA missiles carried by attack helicopters are intended primarily for deterring and self-defense.

Thank you man. :thumbup:

As you can see GGTharos you're not right. Serbian variant attack helicopter Gazelle regularly carries the A-A weapons Strela 2M "Arrow" (9M32M).

You can go there and submit ticket or looking answer in manuals or their knowledge base. Last time I ask them which hall sensors built into the X52 and they didn't want answer to me. Therefore, I will seriously consider whether Saitek it will be my next joystick.

In this FM I wonder, that if plane will fall into inverted spin at any altitude, no matter what the pilot do with the flight controls or throttle, in DCS Su-27 did not respond. I just don't believe a plane behaving that way in RL. So that FM is simply not well done. Besides how is it possible at the same time pilot gets black out, and until the plane hits the ground - pilot cann't clear eyesight?

I would most like to ED stop publishing patches for v 1.2.6. xxxxx because it would then mean that it will soon be published version 2.0, which I'm expected by the end of April. :music_whistling:

I didn't want to open a new topic, but the issue is related to AP. A long time I didn't flew DCS K-50, and now I see in this version 1.2.16.37730, when the “ЛЗП” – desired track angle hold, mode is activated, helicopter does not return, and does not follow the line route, as it should be, and as it was previously. In fact these two modes (“ЗК-ЛЗП”) behave the same, and that is wrong. See attached picture. P.S. Ah yes, and one more thing, I don't hear trim on/off sound anymore (click).