RAZBAM_ELMO

Issue resolved in latest patch. Check patch notes. Marking as RESOLVED and moving to RESOLVED.

INS updates in latest patch. Check patch notes. Marking as RESOLVED and moving to RESOLVED.

RESOLVED in latest patch. Moving to RESOLVED

Marking as RESOLVED and moving to RESOLVED. Check new keybinds in patch notes.

Already added from patch update with added keybinds. Marking as IMPLEMENTED and moving to RESOLVED

I look forward to your results. Its not that this was being ignored or disregarded, rather it was people unable to prove with concrete evidence in flight as TBH the attack profile were left to be desired but you have come forward with some very specific evidence to back up your claim. Up until now, neither myself or the dev team have found it to be in-accurate by any means but were always open to the possibility it may change or that it was changed during the recent switch to SVG format where the values of HUD locations may have in advertently been incorrect. I emplore you to investigate after the next OB patch to see if this is still occuring. MAke sure you use various ranges to substantiate your claims

I will pass this along to the team and see what they make of it Have you tested with other weapons to see if this affects their accuracy as well?

Changelog for tomorrow: 27 JAN 2021 DCS AV-8B N/A by RAZBAM Simulations Added: Missing keybinding for seat height adjustment Added: JDAM Terminal Parameters are enabled. Added: AGR20 - APKWS II guided rockets. Updated: USS Tarawa: Changed the missiles from Sea Sparrows to RIM-116 RAMs Updated: Changed Course Knob to Course Switch functionality. Updated: Rocket options: FFAR rockets (Mighty Mouse) have been deleted. Updated: JDAM LAR representation on the EHSD. Updated: Added 1.5 sec delay for JDAM release. This is the time the AC computer takes to send the bomb the target coordinates and terminal parameters. Updated: High quantity bomb loadouts for consistency in weight and drag. Improvement: Engine sounds with the assistance of 112th_Rossi Improvement: MPCD converted to Stroke (SVG) symbology. Improvement: JDAM Data Block enabled in the EHSD. Fixed: Course line not appearing for targetpoints. Fixed: WYPT and WO/S position when map is North-UP and Magnetic Heading selected. Fixed: Map rotation when it is North-Up and Magnetic Heading selected. Fixed: TCN and TO/S position when map is North-Up and Magnetic Heading selected. Fixed: AWLS station position when map is North-Up and Magnetic Heading selected. Fixed: SEQ. not displaying correctly on EHSD Fixed: Analog clock shows only ZULU time regardless of cockpit time set in ME. Fixed: ALE-47 is OFF when starting in the air Fixed: EHSD bearing indicator always uses True Heading (fixed with SVG) Fixed: TD symbol missing dot in center (fixed with SVG) Fixed: EHSD course line remains green when a different color is selected. Fixed: EW not resetting ECM dispensing program after rearm. Fixed: CCIP cross and BFL still visible after all bombs have been released. Fixed: Corrected position of wing tip vortices for KC-130 Fixed: MPCD displays show on same spot when display mode is HUD ONLY Fixed: Aircraft going supersonic when high quantity bomb loadouts are released. Fixed: DMT HUD symbology. DCS M-2000C by RAZBAM Simulations Added: New keyboard binds. See forum entry for complete list. Added: New axes. See forum entry for complete list. Added: NVG gain (with keyboard bind) Updated: HSI VAD rho/theta select behavior Updated: ADI Cage/Uncage mechanism behavior Improvement: INS Vertical Update Improvement: INS Oblique Update Improvement: Updated exterior Model LODs to show Navigation Lights better when further away. Fixed: Cockpit flood light rheostat Fixed: HSI adjustment knob behaviour Fixed: Locked target becoming DO when decreasing range Fixed: boresight/vertical scan display order Fixed: Radar ACM mode elevation bug Fixed: IFF HUD "A" or "F"(english) symbol not shown on Magic triangle lock Fixed: HUD FPM wrong drift caging at high bank angles Fixed: Wrong altitude transitions for HUD FPM caging/uncaging Fixed: Behavior for UVHF preset knob when using manual freq. Fixed: OBL radar cue to match beam position. Additionally here are a list of axis and keybinds added for the M-2000C Added Axes ---------- Altimeter Calibration HUD Brightness Dashboard U.V. Lights Knob Dashboard Panel Lights Knob Red Flood Lights Knob Console Panel Lights Knob Caution/Advisory Lights Knob White Flood Lights Knob Light Brightnes Control/Test Refuel Lights Brightness Knob Backup ADI Pitch Adjust Knob Radar Gain Dial Target Wingspan Knob RWR Light Brightnes Control VOR/ILS Volume Knob TACAN Volume Knob MAGIC Tone Volume Knob TB APP Volume Knob Marker Signal Volume Knob UHF Radio Volume Knob V/UHF Radio Volume Knob HUD Brightness Dashboard U.V. Lights Knob Dashboard Panel Lights Knob Red Flood Lights Knob Console Panel Lights Knob Casution/Advisory Lights Knob White Flood Lights Knob Light Brightnes Control/Test Refuel Lights Brightness Knob Added binds ----------- Gun Trigger BRM Release Autopilot Standby Mode Inverted Backup Horizon FWD/FORCED, else MID/POWERED Backup Horizon AFT/OFF, else MID/POWERED Backup Horizon AFT/OFF Backup Horizon MID/POWERED Backup Horizon FWD/FORCED FBW RESET NVG Lights Filter ON else OFF FBW G-Limiter AA else CHARGES Master Arm ARMED Master Arm SAFE Backup ADI Uncage Lock Toggle Backup ADI Uncage Lock Pull Backup ADI Pitch Adjust CCW Backup ADI Pitch Adjust CW RADAR POWER CCW RADAR POWER CW HSI VAD - HSI VAD + HSI Mode CCW HSI Mode CW HSI VAD STEP - HSI VAD STEP + BINGO Fuel 1000kg Inc BINGO Fuel 1000kg Dec BINGO Fuel 100kg Inc BINGO Fuel 100kg Dec BINGO Fuel Combo Inc BINGO Fuel Combo Dec Selected Alt FL 100 Inc Selected Alt FL 100 Dec Selected Alt FL 10 Inc Selected Alt FL 10 Dec Selected Alt FL 1 Inc Selected Alt FL 1 Dec Selected Alt Combo FL+10 Selected Alt Combo FL-10 PCN Parameter Selector CCW PCN Parameter Selector CW INS Mode CCW INS Mode CW INS PCN Operational Mode CCW INS PCN Operational Mode CW UHF MODE AR UHF MODE M UHF MODE F1 UHF MODE H UHF MODE Rotate CCW UHF MODE Rotate CW UHF Channel Knob Dec UHF Channel Knob Inc V/UHF MODE OFF V/UHF MODE FF V/UHF MODE HQ V/UHF MODE SV V/UHF MODE DL V/UHF MODE G V/UHF MODE EN V/UHF MODE Rotate CCW V/UHF MODE Rotate CW V/UHF Channel Knob Dec V/UHF Channel Knob Inc V/UHF MEM/CLR V/UHF VLD/XFR V/UHF 1/READ V/UHF 2/SQL V/UHF 3/GR V/UHF 4 V/UHF 5/20/LOW V/UHF 6/TONE V/UHF 7 V/UHF 8/TOD V/UHF 9/ZERO V/UHF 0 V/UHF CONF TACAN CH 1- TACAN CH 1+ TACAN CH 10- TACAN CH 10+ TACAN CH Decrease TACAN CH Increase TACAN CH XY Switch TACAN CH X TACAN CH Y TACAN Mode OFF TACAN Mode REC TACAN Mode TR TACAN Mode AA TACAN Mode Next TACAN Mode Prev TACAN Mode Cycle VOR/ILS Volume Dec VOR/ILS Volume Inc TACAN Volume Dec TACAN Volume Inc MISSILE Volume Dec MISSILE Volume Inc INTERCOM/APPROACH Volume Dec INTERCOM/APPROACH Volume Inc TP/MARKER Volume Dec TP/MARKER Volume Inc UHF RED Volume Dec UHF RED Volume Inc V/UHF GREEN Volume Dec V/UHF GREEN Volume Inc

Marking as USER ERROR and moving to RESOLVED

Confirm your file path in saved games is as follows User/ Saved Games/ DCS.openbeta ( or stable if you like to live on the wild side of things)/ Liveries/ M-2000C

Info passed along to Mission creator. Will address if need be.

M-2000 has three weapon plugs. 2 are immediately taken up by the Gun and Magic R550s. This leaves you only one slot available to use. Mixing loadouts will not allow you to fire weapons correctly. While you CAN load other weapons onto the aircraft, youre essentially a bomb hauler bringing weapons from one place to the next. Marking AS INTENDED and moving to RESOLVED

Marking as FUTURE IMPLEMENTATION and moving to resolved. We have the code from ED but we also need the new world and vehicle FLIR maps to be implemented by ED for this to function and work correctly. Moving to RESOLVED.

Alright so alot has changed, so before I move this as a USER error, are you able to hop onto our Discord at any point this weekend? There just a whole lot to explain here about what you are seeing and describing.

Marking as USER ERROR and moving to RESOLVED

Marking as DUPLICATE REPORT and moving to RESOLVED.

Noted.

merging with keybinds topic

Will pass this along and confer with SME to check if behaviour is correct or not.

Its getting fixed, I'm just stating that im curious anyone ever pushed the jet that far out of its envelope to find it, nowhere did I say that its not a bug and ignoring it.. FM dev seems to have rooted out what is causing it but might be a bigger can of works than we thought. Weird drag numbers going on between a TER rack and a single bomb.

Did you bring up the TPOD from the menu page on the right MPCD and set it to operate?

Hmmmm interesting. I will have to try to dig a little deeper on this. Ive got a feeling its the COLD/HOTRAMP logic for where the planes are on all ships, which would be an ED thing

Tag me when you have as I have a suspicion of what is causing this for you.

I'm going to bring this to some of the CB testers at ED to see. Time and time again I see this issue people are having yet a large portion of people dont have it so it has to be something with how the ARM logic is which would cause such varying results. Will report back if I find something. understand. We will be waiting a bit but please do get the .trk

Just out of curiosity does this occur in an air start and does it affect GBU-16s as well?