Rabso

So fire started on my living room and it burned almost everything, that including my Surface Pro, TM Warthog stick (the throttle is ok but all the hats and plastic button milted from heat), TrackIR and screen :cry: The fire did not reach my PC but it was too dirty (firemen sink it with what they have:mad:) and I have cleaned it well, it's working ok except the hard drive was damaged. So back to TM warthog, here how it became (I guess no one ever tested them with fire :megalol:, here is the results): Some materials could not sustain the high temperature. So I need to rebuild now my DCS tools again and I have two options: 1. Buying again TM Warthog (I really enjoy it specially with DCS A-10C and I am waiting the 10cm extensions from MFG soon). 2. Go for VKB Gladiator Pro. Now I like Warthog as it's with a lot buttons and it's plug-and-play with A-10C. I know Gladiator Pro is better Gimbal but it's WWII style and not sure when (IF) they will do modern fighters Grips, also there is not throttles. What do you suggest guys?

I faced the same issue several times with the F-15C. electrical turned on and off and also the canopy open and close. (Usually at the beginning of season)

I already purchased one with my Crosswind, waiting the shipping by this month

great job, I just bought 2 Pro :)

The Eagle!

My eyes looking toward this:

For sure I am going to GTX 1080 but am going to wait MSI Gaming GTX 1080 :)

RSAF F-15S (it's F-15E in DCS)

I know but it's nice to start a whole operation from base. As per my reading, none of KSA will be covered and this is sad :cry:

The Eagles

I hope they at least cover the eastern air base of Saudi Arabia where we can fly the RSAF Eagles :pilotfly:

here you can find it: http://forums.eagle.ru/showthread.php?p=2254196 enjoy

nope I hate iPhone :D to honest, I am ok with it as this stick is best on market and you will not find such.

Sure, here it is (left side of red button):

damn is this considered as defect?! I noticed it from day one on my stick but thought it's normal :)

Hi all, I am facing problem here; I have installed the latest standalone Modelviewer on my laptop in order to view my skin but the Modelviewer will not work. I have attached the log file, if any one has idea about this please let me know, thanks. log.txt

you are welcome mate, enjoy the max of TMWH now :)

I highly recommend using this script done by Gizzy: http://forums.eagle.ru/showthread.php?t=153039 With this script running from TARGET, you will be able to assign action on down positions too. thanks to Gizzy who saved a lot of my time

thanks guys, it seems that I have to do the sanding thing to get the ultimate of Warthog. well initially I will start with the extension first.

well guys an just a 3 months new to Warthog joystick and after seeing both videos, I am kind not sure and not comfortable to disassemble my joystick. Is it confirmed that adding extension will solve the problem?

Track Clip Pro works fine with me any time, in fact most of my flying time be in dark room. As per my understanding, Track Clip Pro sends IR and Track IR will receive it then analysis it rather than sending IR and reflect it by the reflector

I will tell you the reason Gizzy, look at the attached photo which is the A-10A flaps DCS command. the A-10A does not have the action for MVR Flaps, so using the action Flaps Up/Down twice will take you to MVR then DN Flaps. but the problem is in the way going up; as using Flaps Up/Down one time will take your flaps fully up. What I want is to control my flaps to be on steps going down or up. The action Flaps Up is accepting to take the flaps MVR then full up. but this will make me need one more command from TARGET GUI My solution is to make TARGET GUI send 4 commands and I will do the following: Flaps Landing Position will take RSHIFT DX22 and DX23 Flaps Up will take RSHIFT DX23 and DX22 and this is the result: [TABLE]At "Flaps Up" DX22 down to "Flaps MVR" RSHIFT DX22 down to "Flaps Dn" DX23 up to "Flaps MVR" RSHIFT DX23 up to "Flaps Up" DX22[/TABLE] So I have replaced your MapKeyIOUMD of FLAPM with the two MapKeyRIOUMD commands and it works nice :)

exactly, you just gave me the hint :) so this will be like this as per my understating: MapKeyRIOUMD(&Throttle, FLAPU, PULSE+R_SHIFT+DX22, PULSE+R_SHIFT+DX22, PULSE+R_SHIFT+DX22, PULSE+R_SHIFT+DX22, PULSE+R_SHIFT+DX22, PULSE+R_SHIFT+DX22); MapKeyRIOUMD(&Throttle, FLAPD, PULSE+R_SHIFT+DX23, PULSE+R_SHIFT+DX23, PULSE+R_SHIFT+DX23, PULSE+R_SHIFT+DX23, PULSE+R_SHIFT+DX23, PULSE+R_SHIFT+DX23);

thanks Gizzy for your great work, I can't fly without it. I have question and let me first quote this from your post So by referring to this statement I can say: on Up position it will send DX22 now going down to MVR position and it will send RIGHT SHIFT + DX22 ok one more down to DN position and it will send DX23 now if I go up one click (i.e. MVR), it will send nothing! how I can make it send DX so flaps will go to retract middle. maybe RIGHT SHIFT + DX23?

Indeed :thumbup: