Fakum

I am trying to practice IR Mavs with TPOD and have run across an issue that I have not been able to resolve working with others on the same server. They don’t have the following issue even when we all jump in the same hot start Harrier. WP-1 = currently selected steerepoint. Even if I do nothing else, and just box the “Designate” OSB on the left MAP screen, it shows up as Designate “TGT” instead of Designate “STP”, and they get “STP” as expected. I cant get that to switch to “STP”? Here is what is happening, just for me that I can not get resolved. I take off in NAV mode and HUD shows WP-1 at say 20 Miles, I switch to AG mode, and HUD still shows WP-1 at say 20 Miles (All is good and as expected). As soon as I Sensor Select Down TWICE (Or push in or depress as some might say) to bring up the TPOD as SOI, the HUD switches from WP-1 at about 20 miles to 53 miles TGT? No where near pointing at WP-1. We cant figure out why is seems to slew to a target that has not been designated as of yet? Again, it was noticed right away on the ground before takeoff that when “Designate” on the map was pressed, it went to TGT instead of STP. I have been trying to resolve this for over week reading through forums etc, watching tutorials to see if I an goofing something up, sharing my screen with others to confirm my procedures, no luck. I have cleared my keybindings and only set the minimum required to get off the ground and test. Full repair, Uninstalled & Re-installed harrier module and all MODS Disabled. Checked “Special Settings and tried Easy Mode TDC On or Off. I am at a loss. Any suggestion are welcome. Thanks, nullnull nullnull null null

I had some keybinds I had to redo for my HOTAS

@grim_reaper68 @Vital061270 Thank you both, that clears that up for me.

@Vital061270 Thanks for that link, but for some reason, I cant get TACAN to power "ON". I went through the manual, but nothing I could find to figure out why when I press the button, TACAN wont switch to ON? Something else I suspect needs to be turned on elsewhere? null

177 views, and still no one has any kind of response? I must have asked a really dumb question.

@Rogue Trooper They were indicated as being available, but I cycled them anyway, Still same issue, but thanks for the response. @tribundf Thanks for the response, I was not aware that it was bugged, so thanks. I didnt read that anywhere, and it puzzled me that there were over a 100 views and before i bumped it again and got a response. Thanks again

Thank you sir! That makes sense. I appreciate the feedback.

After I stack (3) Crates out in front of me, I opened up the “REARM/REFUEL” menu (Its doesn’t show up in the Track File for whatever reason) and on the left side, I see the (3) crates listed, then I press the “LOAD” button. It immediately loads the crates into the back and the helicopter just takes off wildly on its own. I left the “Controls Indicator” on to show that there are no apparent control influence forcing anything. If I cycle the Throttle and Stick while this is occurring, there is no reaction to my inputs except for it showing on the controls indicator that I am physically moving the stick around. I went through my AXIS controls and all seem just fine. I have also done a full/slow repair. This is repeatable. Track file attached. There are no MODS running. Just DCS and TrackIR. The CTTR v1.9.1F-20241104-160540.trk

Ok, thanks

Thanks for the response. EGI is ON as far as I can tell, I dont see anything to turn on though on the "START" pages. Maybe I am missing something? nullnullnull

111 views,,,,, nobody?

98 views,,,,, Awesome,,,,,,,,,,,,,,

When entering a Multiplayer Server that already has assigned WAYPOINTS for the Hook, why is it when you bring up the Hooks FLIGHTPLAN, the numbering sequence is off by one? E.G., If I see that I want to goto WAYPOINT "2" (as shown on the F-10 map) I have to select # 3 in the Hooks FLIGHTPLAN to navigate to get to WAYPOINT "2". I have only seen 2 tutorials relative to Navigation for the HOOK and it wasn't mentioned in either that I could determine.

At 8:22 in this tutorial, he creates a Mark Point to incorporate into his flight plan, the coordinates display at the bottom. When I hit the Mark Point Button, it does NOT generate coordinates in the bottom of the display? I dont know why, thanks for any help.

So the links to do an update are not as straight forward as they need to be. I was already running version 2.0.0.0 and I did NOT have a FOLDER inside my Scripts folder as presumed by the instructions for doing an "UPDATE". To fix the semi failed attempt to update, I had to remove an pre-existing "theway" line in my export.lua and I also deleted the "theway.lua" in my scripts folder. Seems to be working now.

@jonsky7 I wound up putting your folder "theway" inside of the scripts folder (as you mentioned above). Then I ran the insatll.exe you provided in your files (per install instructions for update), then I added that line to my export.lua. The app itself starts up and clearly indicates that it is the new version, but its not working right. I havnt done anything else yet, but keep in mind that I have a per-existing "theway.lua file that is in the Scripts folder, I suspect that to be an issue since I would guess now that the update wants to look at the one in your file structure. I also added the line to the export.lua, but there is a previous line in there from the older version that is not the same, I suspect I have to delete that. I will look at this again tomorrow. Thanks

Well, maybe it wont be so hard to figure out. The best that I can tell is that I am running version 2.0.0.0 which was installed 6-3-23. As I stated before, I dont have a FOLDER called "theway" in my scripts folder, "theway" folder I have is installed in: C:\Users\Your Name Here\AppData\Local\Programs\theway I will run the installer in your file and figure it out from there and do as you described above i suppose. Thanks,

@jonsky7 Thanks for the link for install instructions, but I already had that info, the simple confusion is that I currently am running an older version, I just want to update, but the instructions say to replace "THEWAY" folder, in my Scripts have to execute the installer that is provided in your Folder, but like I said above, I dont have one there now (As shown in the screen capture I provided). So Im thinking that I have to run the installer in the file package that you provided (whatever that will do since i already have an older version running) then move your "THEWAY" Folder to Scripts folder? I dont want to gaff this up and create a freakin problem here because I dont currently have a folder in the Scripts folder as expected in the instructions. null

@jonsky7I appreciate that you shared your file, I am confused though as to how to update it because your note states to: "Update THEWAY FOLDER" I dont have a "THEWAY FOLDER" in my "Scripts" Folder, I do however have a "THEWAY.LUA" FILE in there. Am I supposed to just take the "THEWAY.LUA" file from what I extracted from your file and replace the one I have? nullnull null

How do we get this implemented into the latest repository? I also want to use it for KIOWA as well along with the CH-47

Thanks for the response

I have the same result, I would like to know why myself. The tutorial I watched for navigation showed the "mark" button being pressed then the current coordinates populated fine.

Wow,, I didnt even consider trying that, but it worked! Many thanks

Good point, I couldnt find the option to delete the post, but I will mark it as solution, thanks

I am not clear on this response. I cant get my mouse to move the gun. In the 1st option, my TrackIR is moving the gun around (I dont want that). Pressing the middle mouse button twice does nothing. If I select the 2nd option, the gun wont move at all and I cant assign the mouse movement to gun left/right in the CH-47 Gunners Axis commands? null null