Repsol2k

Mauklin did u tried to give the AXIS a deadzone of 5 for example ? For me it works without jerking but the only problem is for me when i reach the end position of the axis stick then sometimes it stops to move.

In the Engine DDI Display u also can check during flight which temperature u had as SORTIE JPT and then u also have a OT TIME which i think should show u how long u overtemped the engine. Source: https://info.publicintelligence.net/AV-8B-000.pdf

I give u the description according to the AV8B NATOPS - 000 Source: https://info.publicintelligence.net/AV-8B-000.pdf Site: 643-645 BUT I dont know if in the discription of the Natops the picture which u see for the Radar and Night Attack Version is correct because there u only have the Ghost velocity vector. Dont know if in the N/A version u only have the ghost vector or if u have both. In the picture of the Day and Training version u have both the Ghost vector and the normal vector. Maybe someone of Razbam can give more information what is right and what is wrong ?

U need to go to C:\Users\YOUR PC NAME\Saved Games\DCS.openbeta\Config\Input There u find the different Aircrafts with the different Input profiles. Copy those and then after an update u can paste them over the existing files or put them new inside the Input folder if they are been deleted. Hope this helps for u ?

AV8B has this function according to the NATOPS document: Source: https://info.publicintelligence.net/AV-8B-000.pdf Further information can be found on page: 594

Here are some steps which u may can follow if u not already did: Windows Power Plan -Control Panel -Hardware and Sound -Power Options -There u click on High Performance Next: Do u use Windows 10 ? If yes u are aware of the Gaming Mode of Windows 10 ? Go to your: -Windows Settings -Gaming -Game Mode -There u can activate it. If not because i think after last updates u need to activate it inside the Game then do this following steps: -Go into DCS -Start a quick mission (doesnt matter which one) -When all is loaded press : Windows + G -Then the Windows Game Bar should open -There u can activate the Gaming Mode What else ? TrackIr5 Software For myself i realized that the TrackIR5 "Precision" mode makes it smooth but also gives me some micromicro stutters. Therefore i have it turned off. Nvidia Settings: Go into your Nvidia Control Panel and look inside the "Manage 3D Settings" for Power Management and be sure its set to "Prefer Maximum Performance" GPU Tuning Software: Do u use a tuning software such as AISuite ? If yes then turn it off when u using DCS Nvidia Driver: Which Nvidia Driver are u exactely using ? For me after 377.81 i only get problems. Currently im using 377.31 without having any problems. VSync/ Your Monitor: What kind of Monitor do u use ? Do u really need 120FPS? Maybe u can try to force your Monitor to 60Hz when u have a 120Hz monitor ? Maybe u can try to force all to keep 60FPS/Hz. But i dont want to start to discuss about 60/120FPS/Hz and there benefits this is a personally thing :D Maybe some of these steps will help you. let me know if u find something out with that.

So i made now two videos. First video as i wickled around with the cursor in the middle lower part of the screen i pressed the pickle button. As it should be nothing happened. Then i switched to another mode and u see the bomb is relaesing immediately. Second video i pressed the pickle button one time before the counter was 0.0. When the Harrier arrived the releasing point it was releasing the GBU without a pressed pickle button. Then i was able to press the pickle button again and it dropped the GBU again. And then i pressed it again as long as i had GBU's left. At the end of the video u can see i was able to bring all GBU's to one point with using the TPOD. So one run and 10 GBU's on one target. Can this behaviour be right ? At the end of the video u see how the GBU's are flying into the target. FYI: And when i saw that i was like Mhhhhhhh DCS 2.5 and the Harrier i Love IT.

Yeah its easy to reproduce the bug and after work i will do a Video. Only set u in air with gbu armed, then press pickle, Switch to DSL/CCIP and bomb falls immediately.

Hey guys thanks for checking but i think now that my problem is more related to a not correct pickle button behaviour like in this thread mentioned: https://forums.eagle.ru/showthread.php?t=202990 When u go down with the nose to a certain degree the harrier automatically changes from RAUTO to AUTO mode. I think when this happens the bomb releases automatically like in the thread when u in RAUTO mode and press the pickle button nothing happens but when u then change manually to DSL mode it releases the bomb immediately. I will try out if this can be replicated or not.

So made a couple of tests to sort out whats going wrong. Equipped with some GBU 12 and the TPOD i designated a target on the ground. Then it was in RAUTO Mode. I pressed the pickle button one time and nothing happened. When i then switch to DSL Mode it released immediately the bomb without pressing again the pickle button. Then i flew over the release point in RAUTO Mode without pressing before the pickle button nothing happened as it should be but when i was approx 5 sec. over the release point i was able to press the pickle button and it released the bomb immediateley even im in RAUTO mode were it only should release the bomb when the counter is 0 or ? Because when u "overshoot" the release point it shouldnt be possible to release the bomb like in CCIP mode when RAUTO mode is on? Or this is maybe a feature i dont know but for me it looks like that when u reach the release point that the RAUTO mode acts like a CCIP mode. Maybe i will try to make a video later and to mark the points were i pressed the pickle button and when not.

For me the AR/PT Mode is also not working but i think this isnt the problem. Be sure that u before u lase the Laser Modus is on ARMED and on LASR otherwise it is not armed and is in training mode. This u can see in the upper side of the TPOD MPCD. And then dont forget to press FIRE . When its firing the laser u see that FIRE is underlined.

How it would be to open the link and to read further ? I mean i can qoute all the content of the document but then u still need to search for what ure looking for though ? Maybe this helps u more because i only qoute what the Manual says and i dont give u the answer u may looking for.

Maybe this gives u a answer for your question : 11.8.10 Hovering The aircraft is unstable in yaw and has neutral stability in pitch and roll in hovering flight. The reaction controls are acceleration demand controls as opposed to the normal rate demand control of aerodynamic surfaces. This difference requires no conscious change of pilot technique but can lead to over control until experience is gained. Turns with very small angles of bank can be made at speeds up to 30 knots. Large sideslip angles can inadvertently develop due to directional instability at low speed which results in yaw out of the relative wind. The sideslip which can be developed causes large rolling moments which, in extreme cases, can lead to loss of control. If significant sideslip develops, use rudder to reduce the sideslip and aileron to level the wings. If roll is used to reduce sideslip, a sudden increase in incidence will occur with a resultant increase in rolling moment and possible loss of control. Source: https://info.publicintelligence.net/AV-8B-000.pdf

Maybe its a bug or i have less information about it. I was in Multiplayer on 2.5 Caucasus. Had a Predator for Lasing targets. Catch the Laser GBU12 in RAUTO Mode but it pickles the weapon completely automatic. I didnt pushed the pickle button but he released the bomb itself ? And on the HUD the RAUTO switched to AUTO. After that i was able to press the pickle release and the bomb dropped as it would in CCIP mode without wayting till the counter gets 0.0sec. Will also try to reproduce the issue in Singleplayer but does someoneelse also noticed that ?

Do u already found a Solution? I was wondering why my Point modus arent work /-:

Do u played around with the AISuite? Or all for ur 1080ti on standard? I noticed when i set my AISuite only the Power Target to 120% and the GPU Voltage to 100% and then i close AISuite i got a really good performance. Set my Nvidia Settings to Antialiasing Mode : On Setting: 8xQ Transparency Supersampling to 2x Everythings looks good when i turned off MSAA and AF Ingame. But this for non VR with VR i need to test

Glad to hear that the driver downgrade helped u. For the VR experience i noticed that the 388.13 works well. Already read that the 388.31 has there some problems so i will stay for 388.13 even i dont know if the 388.71 is maybe more efficient compared to the 388.13 with non-vr experience but at the moment all works well.

As i looked from the outside of the Mirage i noticed a not fitting Normal Map ? Looks like a Digital Camo pattern. Normally u see this kind of pattern when its cold outside due to the different materials underneath the skin but these more should like follow the pattern of the structure underneath like the stringers or rips. Which also would make a cool effect when this would be as a seperate normal map been included :D Tried to find a already reported Report but cant find one. If i didnt looked correctely and there is already one then Sorry for that. Seen in the newest 2.5 Version. Texture Settings : High Resolution: 3440x1440 Nvidia graphic card with driver 388.13 If u need more information for reproducing the issue then please let me know

Yeah Black Sea :D The Problem is not the color or the Medium or High Settings, the problem is the way how the water is reflecting the light. When u fly over the water into Sun direction u see the waves. When u fly against the sun direction u see no reflections of the waves and the water looks black. Its the same effect like the canopy scratches , they are only visible when the sun is reflecting them. But if ED would add more reflectioness to the water i think the performance will decrease a lot :/

Ok download marathon is finished and yeah its runs smooth as never before. Even i didnt optimized my settings it runs stable. Ok sometimes only little drop to 42FPS but rest runs a stable straight line of 45FPS according to Tray Tool. Didnt even set Nvidia to high performance though. But definetely an improvement !!! For everybody who has problems like i had this could be a solution or only to make a new partition and install there only DCS and the Oculus driver. Below u can see my settings from my last Test run. Also i noticed that the loading times are quicker .

What kind of shimmering do u mean ? For me it sounds like that there is a filter active or something like this ? Because with normal settings u should get a clear picture or a clear jaggy picture but not a shimmering picture which u get when u have for example a "Blur" filter on

So dont know if that somebody want to know but now my download marathon begin :D Windows already installed and also the drivers etc. I will give a report tomorrow if maybe a faulty windows or some programs which are laming my pc causing the problems. Because when now it doesnt runs smooth then i dont know where the heck is the problem. But i think a fresh windows and the minimum of programs installed should be a kind of "solution" even i know that its for most of us not the right solution. Nevertheless thanks for your afford trying to help me. If the problems are still there after the BIG reinstall then maybe we can continue to find the source :D But the download marathon gives me time to continue the work on my BF109 plastic model :D :D So everything has a sense though

So i Will Go now the hardest way and im will do a reset of windows :-/

So tried to get steady 45 FPS but its now jumping around 40-45FPS but when i click outside the game window it holds steady the 45 FPS ???? Whats wrong ? Cant understand this curious behaviour and whats the source of it:/

So removed all with DDU tool in safe mode. Only installed PhysX and Driver. But when im InGame and as Example i use the AV8 Free Weapon Practice Quick Mission my Framerates ar jumping around from 30-60. Then i tried to keep it on 45 but yeah every 3-5 seconds it falls down for a short moment. The Performance Headroom of the Tray Tool tells me i have -60/80% ?? So not quite good. Turned shadows off now and PD to 1.3 and MSAA Off but yeah still FPS are wiggeling around :/