

TheFlyGuy
Members-
Posts
82 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by TheFlyGuy
-
Thanks! That worked.
- 489 replies
-
- 2
-
-
Thanks for nothing ED. I've got my "Order completed" E-Mail one hour ago, but no chance to download the Germany Scenerey anywhere. Not from the DCS launcher, that only lets me download the outdated "Channel Map" scenery, and not in the Game's Module's section from the main menu. I wanted to download overnight, to play a little bit on the holiday tomorrow, but no chance.
- 489 replies
-
That was it. Thank you very much!
-
I have a Flightplan from the Mission Editor.
-
I haven't been flying the A10-C for a While. When I startup the Aircraft, at some point I select the DSMS "Load All" Function. CDU is already initialzing at this Point. If I remember correctly this Function not only loads the Weapon Loadout, but also the Flightplan(s). Now, the Weapon Loadout gets loaded, but not the Flightplan, or any Waypoints at all. What am I missing?
-
Yes, I know the new server installer, but after it has been run once, I don't see how to get the terrain choice again to add more terrains later. I don't want to delete my current server installation, because I would need to reconfigure many things. If the DCS server is already installed on the machine where you run the modular server installer, it complains, that DCS server is already installed and aborts the installation.
-
Now, that I finally have enough SSD space on my dedicated server, I would like to install some more terrains on it. I know, I can call the DCS_updater with parameters to install additional maps like this: DCS_Updater.exe install SINAIMAP_terrain Is there an overview somewhere with all the module names, that I can use with the install parameter?
-
Thank you for the hint Mkoolen89, but I was just referring to the tutorial mission, not starting up the Chinook in general. In the mission, the APU button stays marked after the APU has been started, and it says "Press space to continue" but then nothing happens. I think, most people, who play this mission, don't know at this point that switching on the APU generator would be the next step.
-
I can start the APU in the tutorial mission, and the APU RDY light is lit. But I can't progress the mission from that point. Nothing happens when I press the space key after the APU has been started. I tried it several times, but I always get stuck in the mission at this point.
-
I totally agree with you. But I remember a time when the public beta got updated every two weeks (that's where the "two weeks" meme has its origin). With all our agreements you changed that interval to monthly updates so that you have enough time to do some thorough testing of the new version. So I would suggest putting fewer new features and content in every new update, but instead use the time, we willingly give you, to provide us with stable updates in time as you promise.
-
Doesn't work for me either. I've switched the Tape, set the recorder to record, the green light next to the pilot's left knee is illuminated, and turned that knob in both directions to raise the volume, but no sound at all.
-
There is no mention of a music player in the DCS-specific section of the F-4 manual. As far as I understood, the music files from the Meteor F-4 Album, that comes with the Phantom, are meant to be used as a soundtrack in your homemade video productions. But I hope I'm wrong. It would be a shame not to be able to listen to these tracks while flying the F-4.
-
The module is not available to download on my list
TheFlyGuy replied to Midair's topic in DCS: F-4E Phantom
The Power Shell Command doesn't work for me: "Unknown module HEATBLUR_F-4E" The Status of my Purchase in the EA Store for the F-4 is "Completed", Update is installed, but I neither get the Phantom offered to Download in the Module Manager, nor does the Shell Command work. null -
investigating Mission 2 experiences
TheFlyGuy replied to Ready's topic in A-10C The Enemy Within Campaign 3.0
I tried this mission twice, but wasn't able to finish successfully. The last contact I had with any other unit was at Echo when there was a in Incident at a bridge (didn't want to spoiler more here). Afterwards I was only flying circles over the rest of the waypoints until the convoy reached its destination at the airport. I then flew to the next waypoint after hotel, turned around and landed after I received landing clearance from ATC (just the normal DCS ATC). Result: Mission drawn. What have I missed? -
Yes, same here. With 'easy communications' set to 'on' the VHF radio switched back to FM mode after I dialled in the frequency of the tanker. Therefore one of my radios transmitted on 'intercom' instead of VHF AM. After I set the VHF radio back to AM (a second time) everything worked. And you will only receive the TACAN signal from the tanker if TACAN is set to 'TR' instead of 'AA'. Great campaign so far. I'm really loving it. The best thing is, that the mission scripts are very forgiving, so even if you miss something, they will always catch up at a certain point.
-
I also have the problem with the tanker not responding. There are three possible keybindings in the A-10C II control options for the HOTAS MIC Switch that I can see. MIC switch AFT, MIC switch down and MIC switch Forward. They are used to transmit either on INTERCOM, UHF or VHF FM Radio as I can see on top of the radio menu. There is no keybinding for the MIC switch available to use the VHF AM Radio. I'm pretty sure there should be also a "MIC switch up" keybinding that is missing somehow.
-
I haven't flown the F14 for a while, so I can't say since when exactly the Problem exists, but when I now load into a Mission with a playable F14 DCS crashes to Desktop. I've already deactivated and deleted the F14 and reinstalled it again with no effect. Also did a Repair run with the DCS Updater. Just for testing purposes I created a new Mission on the Caucasus Map with a single, flyable F16. The Misison loaded fine. Went back to Mission Editor and added a flyable F14B. DCS crashed while loading into the Mission (while the Loading Screen shows "World Preload 1/60"). Reloaded DCS, removed the F14 from the Mission, and was able to run the Misison again. So it's definitly a Problem caused by the F14. EDIT: After some more Testing it seems like the Problem only occurs with the F14-B. The F14-A seems to work. dcs.20221102-104132.crash dcs.20221102-104132.log
-
I haven't flown the Gazelle for a While, but when I now fly the Gazelle M my Monitor/TV stays black when I switch it on. Yes, I turned up the Brigtness and Contrast on the Monitor, but it stays black. Only Thing that is different from when I fle the Gazelle last Tme (apart form some Open Beta Updates) is that I now fly in VR using OpenXR instead of Steam VR. I've already uninstalled the Gazelle completely, did a Repair of DCS World, and reinstalled the Gazelle, but still the Monitor isn't working.in the Gazelle.
-
- 1
-
-
OpenXR Guide - Deprecated - This time for real (▀̿Ĺ̯▀̿ ̿)
TheFlyGuy replied to nikoel's topic in Virtual Reality
I know, it's difficult to browse through a 27 Page long Thread, but this has been answered several Time in the last 24 hours. I just copy & paste my last answer to this Question here. And "yes" somethings wheird with this Path in the Error Message: Set Pixel Density in DCS to 1.0, and don't use OpenXR Toolset. (Disable it in the OpenXR Toolset Settings Menu). I used an external Program to lauch DCS World without VR to reset the PD in DCS, because after I've modified DCS with the OpenXR Mod I couldn't start it, because of the same Error you get. The external Launcher I've used https://www.digitalcombatsimulator.com/en/files/3312032/ -
OpenXR Guide - Deprecated - This time for real (▀̿Ĺ̯▀̿ ̿)
TheFlyGuy replied to nikoel's topic in Virtual Reality
Set Pixel Density in DCS to 1.0, and don't use OpenXR Toolset. (Disable it in the OpenXR Toolset Settings Menu). I used an external Program to lauch DCS World without VR to reset the PD in DCS, because after I've modified DCS with the OpenXR Mod I couldn't start it, because of the same Error you get. The external Launcher I've used https://www.digitalcombatsimulator.com/en/files/3312032/ -
OpenXR Guide - Deprecated - This time for real (▀̿Ĺ̯▀̿ ̿)
TheFlyGuy replied to nikoel's topic in Virtual Reality
EDIT: Problem solved. Flunks Answer on the previous Page helped me out. Who is Jabbah? Yes, I know who Jabbah is, but this Path in my local Installation looks wrong. -
Well that's a Problem on Multiplayer Servers then, when you are flying alone in the AH-64, and rely on George as CP/G as the Gunner.