KungFu

I only fly multiplayer and I've got plenty of tracks for that, but since they are multiplayer I'd rather not upload for others privacy, so here is an instant action trk I think I may know what is happening, I usually use path to climb out and that's when it happens the most during climb out. I think it possibly be wind as you can see it ever so slowly yaw to the left, very slow at first but as I climb it slowly progresses. It did not roll as much to the left as this is a different loadout than I normally carry, I think that exacerbated the roll. All controls are centered and I touch nothing other than to get it on path. a10c.trk

I would tend to agree, but it happens on no other aircraft and I fly many in DCS (same MP mission/server) Doesn't happen in any other sim/game

So, it's been a minute since I've flown this thing. Several times during my last few flights the autopilot would suddenly cut off and the plane would roll left pretty quickly. No stall, no input from me just cruising. At first I though maybe the pitot tubes are icing over so I turn on the heat....still does it. I usually trim out level flight before engaging the alt or alt/heading mode. What could be causing this?

Yep, that's exactly what mine looks like, but I'm in no way going back to ST for this lol. I didn't notice because I just got the A-10C II after MT dropped @NineLine Can this be moved to bugs?

It also does in Cold and Dark startup

yep, it doesn't change the TGP image at all other than the overall brightness. It still looks like a solid green block with no contrast. I did switch to CCD and BH/WH but nothing is really discernable in the image Should note that I'm in VR but I don't think that is the issue

TGP image in HMCS is way too bright, even if I adjust the image in the TGP it doesn't seem to translate to the HMCS image. Is there some sorcery to do this? I've googled/youtubed/chucks guide...nothing.

GrayFlag just released their COIN mission, best server for anything DCS IMHO

How did something like this make it through QA? Seriously? The rest of the update is beautiful and I applaud...but man...really? It does seem to work on the Harrier as far as I can tell EDIT: Nope, it seems to be like 20% works, maybe red herring as when it does seem to work it's with close SAMS and the launch warning worked but was way to short

I used to have a Warthog stick, before it died with buttons failing, I polished the gimbal and applied nyogel, man what a difference....it felt really good. The best part about the gimbal in the warthog stick is that you feel no crossover like you do in regular gimbals. That is one think the warthog has over most sticks nowadays Now I run a VKB MCG Ultimate with heavy springs, strong center cam. With a curve of 15 and saturation of 90 is near perfect on the cyclic You would think that everything in the previous sentences make no sense for heli flying but it does work for me. All the fine movements made are within the center and it has almost no resistance there. It might be better with a progressive cam but I fly other things and I'd rather have a bit of resistance.

I just picked one up two days ago, returned it yesterday. Windows couldn't connect to it via USB and Pitool said that the DP was disconnected (Yes I disabled my IGP) Pimax reddit says that I would need a fiber optic cable or DP repeater. I have a 3090 so it's not just the TI version with issues. I messed around with this thing for hours trying to get it to work, but for the $1k price tag (I have index lighthouses/etc) I'd expect it to be more polished, reliable and provide the proper cables as an addon. It wouldn't even see the headset to do a firmware update. I looked at the Pimax reddit and boy it's a wonder they are still in business with these QA issues. Oh well, back to my reliable Index. Maybe the 12k will be better but based on the Pimax track record I bet the same issues will still be around.

Just picked up a few paid campaigns for the 18 and I thought I'd get at least one for the 16.....there are none except for the redflag one? What's the deal?

I found a work-around. If I start VA up AFTER I have powered up the aircraft then it works fine I think. I do have some question on whether or not NOTES are populated later in the mission doing it this way though, Notes doesn't seem to be populating. So maybe that tells Vaicom devs something...don't know but at least I don't feel like I've wasted money if functionality is not affected by starting it after DCS.....I know it says not to in the manual but it's all I got.

I've only been SP so far. Only thing I did was setup the joystick/buttons. I've already tried disabling MP based on other posts. No Joy.

I've fixed the issue with it recognizing keywords, so kneeboard / show notes works now. I had to train everything like 10 times. My only issue now is the listening/suspending issue when starting cold.

2. No mods other than SRS and I haven't even set that up yet BTW, I've basically disabled everything and tried every setting on this page, restart after each and nothing seems to change the outcome. Export.lua

Which settings?, that's a lot of screenshots, and I'm pretty sure at this point it is nothing wrong on my end due to the following: I did confirm what was found out in the other listening suspended topic in this forum (which I don't see a solution on a very big, older thread which is concerning). It is only a problem in a cold jet, works just fine in a hot or in flight start. So it works fine until you hit the fly button or you are starting cold. I have 3 campaigns I just purchased and not going to modify 100 or so missions from cold to hot start if anyone suggests that I did put in a support ticket to support@vaicompro.com

I've put in a support ticket, let's see how this goes and if they stand by their product. It's not VA for sure. Neat trick, while in the seat, hit ESC to bring up the menu...voila VA works as intended...now say a command as you normally would, hit ESC again and the command will be executed.

Yeah I did the finish step, I went from top to bottom on the install docs. The voice recognition seems to be better on Windows 11 for me, when I first tried this stuff last year after getting more into VR with my Win 10 machine, VA with Vaicom wouldn't recognize much of anything but I had been using VA with another paid for space sim profile using plugins and it was perfect. So, at least that's not an issue. My biggest issue now is the listening suspended problem. Funny thing....hit ESC to bring up the DCS menu, give it a command, then hit ESC again and the command will complete. Honestly thinking of wiping everything out and starting over.

Ok, so going down your list, show log and notes are not coming up during a search of the profile. I have not added anything during the editor session, no alias' nothing. All I did was go through each one and train it. Yes I did hit finish. This is a fresh download and install as of yesterday morning, including VA. I have 502 in the Keyword Collections category, I have all optional Vaicom modules. The editor claims a number of 1011 phrases, but I know there are some under the Edit page of the profile. Now as far as the transmit not "holding" It works just fine while DCS is not running and I have VA up with the profile loaded before running DCS. It works fine until I hit fly in the mission and get in the jet, it goes back to resumed/suspended when holding the button down.

I've had soooo much trouble in the past with Vaicom that I basically did not want to touch it ever again. I just got a new PC and Win 11 so I decided to give it another try and the frustration flows like the dark side through Vader. First thing. Kneeboard refused to work, trained it in the editor and got 95% or greater confidence many times. Thinking good I got it, nope when actually in DCS it thinks I'm saying "need boar" Boar is tasty but I want my f'in kneeboard. I had to reboot for another reason and now it works. Let's see if that sticks. Great, so I can get the JTAC AAR, and other tabs just fine, but I look in the docs and to get to Notes, I'm supposed to say Show Notes, cool I see that in the editor and I train it to be sure. In game..nothing, also says unrecognized so I check the profile and do a search for notes and there is nothing??? Is it a hidden sub command or something? Either way it doesn't work. So what phrase do I use to bring up the notes tab? I've tried "notes" just like "JTAC" etc and nothing. No consistency here Why would Show Notes be in the Editor yet not in the profile itself? This is a freakin' pain. Next thing, sometimes (I'd say actually 60% of the time) My PTT buttons (Comm switch on the Warthog) do not keep listening when holding. I hold the button and it listens and suspends immediately. The other 40% of the time it works. I have not determined why this may be happening but sometimes it starts working during the mission. I don't have issues like this with other VA profiles My post a bit harsh? Well it's paid for software so I'd expect it to be top notch with proper documentation...not seeing that at the moment.

Dude, I've had so much trouble with the kneeboard. I've trained the word and it even says 95% confidence or higher with each saying. But when I am in game it thinks I'm saying need board. it has been a pain in the backside to say the least. A restart and now it works fine, except for the Notes tab which will all the documentation is supposed to be show notes but that doesn't even exist in the profile. argh.

The biggest thing to me is that when you are firing upon infantry with a 30mm, they just stand there firing their ak up at you. Don't run, don't take cover. Same with vehicles, they seem to just say, well damn, this looks like a good place to die right here.

Did you turn on VOIP in the server settings?

That white dot for me only shows if I have the radio menu up in the top right, it does not show for the voip menu no matter how much I move the + around