Spetz

I've done this alot before, but never with route mode on..Think I'll try this tonight..Thanks for the tip !

It should maintain it as long as you are trimmed before hand. If you can let go of the stick and maintain speed and alt, you should be fine. I've pitched up a few times, but I just quickly retrim and it's all good.

Me too..was taken out twice..amazing how slow r73's look when they are coming straight at your windshield...

Nice ! Would be nice to have some ability to defence against jets..

That's a great little .pdf you made. Thanks ! I'll try this out tonight !!

I like the idea of austere landing strips for FC2 and DCS. The Su's are designed to land on rough airstrips, so why not ?

Pagefile is on C:\ - no partitions. I'm not using Readyboost or anything.. Where do you get that it's a USB driver fault from the above ? I can't see anything stating that..But on that note, I'll see if I can get new chipset drivers

Thanks, I had tried that as well..

Hello all, here's my problem. I have no sound either in cockpit or out in 1.02 BS. Single player works just fine and the problem is ONLY with DCS BS. Steps I've taken.. 1. Confirmed all volumes are up in game, control panel, TS 3 and creative alchemy software and tested - Heard everything. 2. Updated all Creative drivers I could, all Directx End-time's (several years worth), and ran DxDIAG. All came back no problems found, etc. 3. Uninstalled all MODMAN mods one at a time, and tried multiplayer - no joy 4. Uninstalled DCS BS (deactivated just to try it out), and reinstalled 1.0 version, and then patched directly to 1.02c - Fired up singleplayer - sound works great. Fired up multiplayer - nothing at all. (TS 3 can be heard in game) 5. Tried adding the line to the autoconfig.cfg file, as per PanzerT's thread from a while back, no joy. 6. Verified all settings state "headphone", and all windows properties for sound are (currently) 16 bit, 44,000. (tried different ones, still nothing) 7. Disabled Soundblaster X-FI and ran mobo sound only -AH HA !!! Sound - but in game sounds are very, very quiet. I have to crank the sound up but that in turn cranks all the other sounds up as well, such as TS 3, etc. 8. Checked properties, now it says 24 bit, 44,100. I'm not at a loss as what to try now..anyone ? EDIT !!!!!!! I feel like a complete idiot now...I alt-tabbed out of multiplayer and opened my volume control..Well la-de-da..there is now a volume slider for DCS BS there. It was on 4... I moved it to 15 and all is good...I have NEVER seen that before..ever.....

Here's my debugging info: Microsoft ® Windows Debugger Version 6.12.0002.633 AMD64 Copyright © Microsoft Corporation. All rights reserved. Loading Dump File [C:\Windows\Minidump\042411-32791-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: C:\Symbols;SRV*c:\symbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Kernel Version 7600 MP (2 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Built by: 7600.16695.amd64fre.win7_gdr.101026-1503 Machine Name: Kernel base = 0xfffff800`02c07000 PsLoadedModuleList = 0xfffff800`02e44e50 Debug session time: Sun Apr 24 12:43:54.003 2011 (UTC - 7:00) System Uptime: 0 days 2:55:28.657 Loading Kernel Symbols ............................................................... ................................................................ ............................................. Loading User Symbols Loading unloaded module list ............ ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 1E, {ffffffffc0000005, fffff80002daaf8c, 0, ffffffffffffffff} Unable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for sptd.sys *** ERROR: Module load completed but symbols could not be loaded for sptd.sys Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+100 ) Followup: Pool_corruption --------- 1: kd> !analyze -v ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* KMODE_EXCEPTION_NOT_HANDLED (1e) This is a very common bugcheck. Usually the exception address pinpoints the driver/function that caused the problem. Always note this address as well as the link date of the driver/image that contains this address. Arguments: Arg1: ffffffffc0000005, The exception code that was not handled Arg2: fffff80002daaf8c, The address that the exception occurred at Arg3: 0000000000000000, Parameter 0 of the exception Arg4: ffffffffffffffff, Parameter 1 of the exception Debugging Details: ------------------ EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s. FAULTING_IP: nt!ExDeferredFreePool+100 fffff800`02daaf8c 4c8b02 mov r8,qword ptr [rdx] EXCEPTION_PARAMETER1: 0000000000000000 EXCEPTION_PARAMETER2: ffffffffffffffff READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002eaf0e0 ffffffffffffffff ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s. BUGCHECK_STR: 0x1E_c0000005 CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT PROCESS_NAME: simulator.exe CURRENT_IRQL: 2 EXCEPTION_RECORD: fffff88002f22938 -- (.exr 0xfffff88002f22938) ExceptionAddress: fffff80002daaf8c (nt!ExDeferredFreePool+0x0000000000000100) ExceptionCode: c0000005 (Access violation) ExceptionFlags: 00000000 NumberParameters: 2 Parameter[0]: 0000000000000000 Parameter[1]: ffffffffffffffff Attempt to read from address ffffffffffffffff TRAP_FRAME: fffff88002f229e0 -- (.trap 0xfffff88002f229e0) NOTE: The trap frame does not contain all registers. Some register values may be zeroed or incorrect. rax=fffffa800d134f50 rbx=0000000000000000 rcx=fffff80002e069f0 rdx=696700d1000000d9 rsi=0000000000000000 rdi=0000000000000000 rip=fffff80002daaf8c rsp=fffff88002f22b70 rbp=0000000000000000 r8=696700d1000000d9 r9=0000000000000000 r10=fffffa800e0da3f0 r11=0000000000000000 r12=0000000000000000 r13=0000000000000000 r14=0000000000000000 r15=0000000000000000 iopl=0 nv up ei pl zr na po nc nt!ExDeferredFreePool+0x100: fffff800`02daaf8c 4c8b02 mov r8,qword ptr [rdx] ds:696700d1`000000d9=???????????????? Resetting default scope LAST_CONTROL_TRANSFER: from fffff80002cb1a39 to fffff80002c77740 STACK_TEXT: fffff880`02f22168 fffff800`02cb1a39 : 00000000`0000001e ffffffff`c0000005 fffff800`02daaf8c 00000000`00000000 : nt!KeBugCheckEx fffff880`02f22170 fffff800`02c76d82 : fffff880`02f22938 00000000`00000000 fffff880`02f229e0 00000000`00000000 : nt!KiDispatchException+0x1b9 fffff880`02f22800 fffff800`02c7568a : fffffa80`0e1c25a0 00000000`00000000 fffffa80`0da61a08 fffff880`03fa975c : nt!KiExceptionDispatch+0xc2 fffff880`02f229e0 fffff800`02daaf8c : fffff880`009ea180 00000000`00000000 00000000`00000001 fffffa80`00000000 : nt!KiGeneralProtectionFault+0x10a fffff880`02f22b70 fffff800`02dac4c1 : fffffa80`0d9a5000 fffffa80`0deecc50 00000000`00000000 00000000`00000000 : nt!ExDeferredFreePool+0x100 fffff880`02f22c00 fffff880`03e136f3 : fffffa80`0a946370 fffffa80`0df02c30 fffffa80`70627375 00000000`000003ed : nt!ExFreePoolWithTag+0x411 fffff880`02f22cb0 fffff880`03e13ab7 : fffffa80`0deecc02 fffffa80`0de7cc10 00000000`ffffffff fffffa80`084d9ea8 : USBPORT!USBPORT_Core_iCompleteDoneTransfer+0xb2f fffff880`02f22d90 fffff880`03e1164f : fffffa80`084d9ea8 fffffa80`084d91a0 fffffa80`084da040 00000000`00000000 : USBPORT!USBPORT_Core_iIrpCsqCompleteDoneTransfer+0x3a7 fffff880`02f22df0 fffff880`03e02f89 : fffffa80`084d9050 00000000`00000000 fffffa80`08676702 fffffa80`084d9ea8 : USBPORT!USBPORT_Core_UsbIocDpc_Worker+0xf3 fffff880`02f22e30 fffff880`010a198a : fffffa80`08676000 fffffa80`084d9ea8 fffffa80`08676750 fffffa80`084d9ec0 : USBPORT!USBPORT_Xdpc_Worker+0x1d9 fffff880`02f22e60 fffffa80`08676000 : fffffa80`084d9ea8 fffffa80`08676750 fffffa80`084d9ec0 fffffa80`0b7e0d40 : sptd+0x4398a fffff880`02f22e68 fffffa80`084d9ea8 : fffffa80`08676750 fffffa80`084d9ec0 fffffa80`0b7e0d40 01cc02b7`f1733a90 : 0xfffffa80`08676000 fffff880`02f22e70 fffffa80`08676750 : fffffa80`084d9ec0 fffffa80`0b7e0d40 01cc02b7`f1733a90 00000000`757b2450 : 0xfffffa80`084d9ea8 fffff880`02f22e78 fffffa80`084d9ec0 : fffffa80`0b7e0d40 01cc02b7`f1733a90 00000000`757b2450 00000000`00000022 : 0xfffffa80`08676750 fffff880`02f22e80 fffffa80`0b7e0d40 : 01cc02b7`f1733a90 00000000`757b2450 00000000`00000022 00000000`00000000 : 0xfffffa80`084d9ec0 fffff880`02f22e88 01cc02b7`f1733a90 : 00000000`757b2450 00000000`00000022 00000000`00000000 00000000`00000000 : 0xfffffa80`0b7e0d40 fffff880`02f22e90 00000000`757b2450 : 00000000`00000022 00000000`00000000 00000000`00000000 00000000`00000000 : 0x1cc02b7`f1733a90 fffff880`02f22e98 00000000`00000022 : 00000000`00000000 00000000`00000000 00000000`00000000 fffffa80`084d9ec0 : 0x757b2450 fffff880`02f22ea0 00000000`00000000 : 00000000`00000000 00000000`00000000 fffffa80`084d9ec0 fffffa80`084d9ea8 : 0x22 STACK_COMMAND: kb FOLLOWUP_IP: nt!ExDeferredFreePool+100 fffff800`02daaf8c 4c8b02 mov r8,qword ptr [rdx] SYMBOL_STACK_INDEX: 4 SYMBOL_NAME: nt!ExDeferredFreePool+100 FOLLOWUP_NAME: Pool_corruption IMAGE_NAME: Pool_Corruption DEBUG_FLR_IMAGE_TIMESTAMP: 0 MODULE_NAME: Pool_Corruption FAILURE_BUCKET_ID: X64_0x1E_c0000005_nt!ExDeferredFreePool+100 BUCKET_ID: X64_0x1E_c0000005_nt!ExDeferredFreePool+100 Followup: Pool_corruption --------- EDIT *** I did some looking around, and some people have been getting this with either uTorrent or BitTorrent and something that it causes. I uninstalled BitTorrent and will see what happens..

I'm getting frustrated with my DCS BS install, which is fresh, and happens with / without mods installed. It seems within the first 30 minute of flying in DCS BS, I crash and reboot. It doesn't happen in any other game or in singleplayer. After the initial crash, it works fine. Any ideas ? This is what I'm getting from the reliability log in Win 7 X64: "The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e (0xffffffffc0000005, 0xfffff80002daaf8c, 0x0000000000000000, 0xffffffffffffffff). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 042411-32791-01"

I'd be willing to do a voice over for you..PM sent !

Can't find the fixed version on lockon files... where is it?

The mavericks will not burn out. It is not modeled in the sim. I cant find the ED Testers post on it but I believe it was from 159th_Viper.

LOL.. First post was yesterday and there are already 12 pages..awesome..

You can do what others do.. Take some screenies of the offender that shows proof, forward them to the admin of the server, et voila..banned. Or... join a sqn, put the time in, get admin status and sort them out yourself.. Has worked for me.

I set up everything uing the SST software for the x52. I also erased all the joystick inputs (button presses) within the game except for the actual control axis that you want to use. You have to set up each aircraft individually now, but you can just ensure that the common buttons are mapped in the SST software and just use one generalized profile.

Best of luck ! As mentioned above, feel free to drop by the 159th (primarily UK based) for some help if needed.

The EO time limit is just a warning. There is nothing but the warning modeling game.

the above sounds about right..

Thanks ! I'll try this out this week.

I've got my NVG on/off and brightness up/down mapped to my x52 pro on the wheel button of the throttle. Works great and with default bindings as well.

The patch works, but IIRC you have to use the most current version of MODMAN to use the patch..perhaps that's your issue.

+1 ! Excellent ! I've never liked 2 joysticks at one time !!

I've only got 9 1/2 hours towards my PPL, but my cousin used to fly CF-18's back in the day, now he flies a desk in Ottawa.