SkateZilla Posted September 17, 2014 Share Posted September 17, 2014 There is active discussion on this already here: http://forums.eagle.ru/showthread.php?p=2179533&posted=1#post2179533 Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs Link to comment Share on other sites More sharing options...
dufay Posted September 17, 2014 Share Posted September 17, 2014 Updater is deleting image.png after verifying Waaaaa Link to comment Share on other sites More sharing options...
Beaver McFanny Posted September 17, 2014 Share Posted September 17, 2014 Yeah, I would like to see if a manual copy would help at all... I only have aircraft folder not aircrafts. There is an aircrafts in Backup folder, but this only has Su-25T files. Oh dear. Unfortunately, I have to go out for a couple of hours. Will try and sort this out when I return. Asus Maximus VII Gene/i5 4690K @4.6Ghz/EVGA GTX 1080 Classified watercooled/16Gb Corsair Vengeance Pro 2133Mhz/2 x Corsair 128Gb ssd in Raid 0/1 x OCZ Revodrive 3 x2 480Gb/1 x Seagate Barracuda 2 Tb hd and 1 x WD Caviar 600 Gb hd/EVGA Gold 750w psu/Corsair H80i cpu cooler/Windows 10 Pro 64-bit/Corsair 500R case/Corsair K95 keyboard/Logitech MX Master wireless mouse/Thrustmaster Hotas Warthog #41581/VKB T-Rudder MK2 pedals/TrackIR 5/Samsung 49" 4K 3D Screen/Samsung sound bar and sub. Link to comment Share on other sites More sharing options...
Bravo020 Posted September 17, 2014 Share Posted September 17, 2014 So from the various threads I can tell, a folder has been renamed from aircraft to aircrafts and this has basically broken everything.. for users with no mods, or strange adaptations to their installation. Unless remapping keys/joysticks is an adaptation....? Feels like quality assurance took a back seat on this one if the installer wasn't tested fully. Never had this with previous updates.... I guess now we need to wait for ED to release another update, and a guide on how we can repair the damage caused by this bugged installer, because as it stands now, my setup isn't working and repair doesn't fix anything and no chance to install the MIG release...... Link to comment Share on other sites More sharing options...
Flagrum Posted September 17, 2014 Share Posted September 17, 2014 Hrm ... /Mods/aircraft/SU-25T/Missions/EN/Training/Combat Employment/image.png The training missions are not part of the normal install, right? They need to be installed separately from the mission selection screen within DCS, iirc? Maybe this is where the problem lies... I had no problems, but I had those training missions not installed if my memory serves me right. I'll go and check that - my other install is still at 1.2.8 and has those missions ... interesting. I'll report back when I know more. Link to comment Share on other sites More sharing options...
Lino_Germany Posted September 17, 2014 Share Posted September 17, 2014 (edited) What happens when you Copy them from /Aircrafts/ to /Aircraft/, and run repair (as they are likely still 1.2.10.30604 Did that (manual copy of the aircraft, repair). The "Can´t move..." message appeared again during repair process. After klicking on "DCS World OpenBeta" the DCS updater downloads again 4848 MegaBytes. Again the "Can´t move..." message. Still no Dora and Sabre available, and of course no MiG-21Bis. Edited September 17, 2014 by Lino_Germany Kind regards, Lino_Germany Link to comment Share on other sites More sharing options...
Lizzard Posted September 17, 2014 Share Posted September 17, 2014 wait..they changed "mods/aircrafts" to "mods/aircraft"?! Holy..this will need a lot of adjustment on (Cockpit based) JSGME mods.. My Specs: I don`t care..it is a Computer..a black one.. Link to comment Share on other sites More sharing options...
SkateZilla Posted September 17, 2014 Share Posted September 17, 2014 I think the update isnt completing which is why the F-86 and FW190 is left in the Aircrafts folder. Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs Link to comment Share on other sites More sharing options...
Bravo020 Posted September 17, 2014 Share Posted September 17, 2014 (edited) OK, after removing all the training files that I had installed (removing them using the uninstall button within the training modules), I was then able to perform an upgrade..... Of course this means having to reinstall the training material again afterwards....however many Gigabytes of data that is to download....AGAIN..... sheesh! Edited September 17, 2014 by Bravo020 1 Link to comment Share on other sites More sharing options...
ED Team NineLine Posted September 17, 2014 ED Team Share Posted September 17, 2014 OK, after removing all the training files that I had installed (removing them using the uninstall button within the training modules), I was then able to perform an upgrade..... Interesting... hope c0ff is still listening :) Forum Rules • My YouTube • My Discord - NineLine#0440• **How to Report a Bug** Link to comment Share on other sites More sharing options...
Rocky49 Posted September 17, 2014 Share Posted September 17, 2014 Skate, I think you are right....Update should be 1410.5 but I only got 1029. So maybe thats why it can't update? Exact same error message with respect to posts above about SU 25T. No mods, Microsoft Essential, Missing my F-86 and Dora Modules. Weird System:Motherboard Asus ROG Strix Z390-E,Asus ROG GeForce RTX 2080Ti OC, GPU, 32GB Corsair Vengeance DDR4 Ram, Intel i9 9900K @ 5 GHz , cooled by NZXT Kraken X52, Acer XB270HU G-Sinc monitor, Windows 10 Pro, Warthog joystick and throttle with wasy extension, VBK Gunfighter Pro and MCG Pro,MFG Rudder, running on a dedicated 1TB Samsung 970 Pro M2 Nvme , Super Wheel Stand Pro, with a HP Reverb G2 Link to comment Share on other sites More sharing options...
kontiuka Posted September 17, 2014 Share Posted September 17, 2014 Guess I'll hold off until this gets sorted out. Link to comment Share on other sites More sharing options...
SkateZilla Posted September 17, 2014 Share Posted September 17, 2014 Skate, I think you are right....Update should be 1410.5 but I only got 1029. So maybe thats why it can't update? Exact same error message with respect to posts above about SU 25T. No mods, Microsoft Essential, Missing my F-86 and Dora Modules. Weird Guess I'll hold off until this gets sorted out. For now, Uninstall any Training Missions (As noted Above). and re-run Update. Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs Link to comment Share on other sites More sharing options...
SkateZilla Posted September 17, 2014 Share Posted September 17, 2014 OK, after removing all the training files that I had installed (removing them using the uninstall button within the training modules), I was then able to perform an upgrade..... Of course this means having to reinstall the training material again afterwards....however many Gigabytes of data that is to download....AGAIN..... sheesh! TBH, if they are just Videos (Not sure, but they were when I checked last), I'll stick to watching them on YT and Alt+Tabbing back and forth between them and DCSW. Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs Link to comment Share on other sites More sharing options...
dufay Posted September 17, 2014 Share Posted September 17, 2014 For now, Uninstall any Training Missions (As noted Above). and re-run Update. SUCCESS. Seems like everything's ok. Waaaaa Link to comment Share on other sites More sharing options...
Carlo Pistolero Posted September 17, 2014 Share Posted September 17, 2014 Same problem, renaming, moving, deleting... and nothing Link to comment Share on other sites More sharing options...
Flagrum Posted September 17, 2014 Share Posted September 17, 2014 Interesting... hope c0ff is still listening :) We had some issues with this file already in the past (1.2.4? can't remember atm). Whenever the updater ran, it would update the file. It swapped it every time for the previous version of it ( variant_a -> variant_b -> variant_a -> va ... etc.). While watching what the updater does right now, it seems it tries to replace it once more with the respective other version (one is a dark grey background with a red star, the other has some sky and clouds as background). c0ff should remember this case - if not, I can search and provide a link to the error report later. ... and bingo! I get the same error now with the install where the training missions are installed. I think, I had not all training missions installed (just 4), but in the _download folder I saw 8 missions. Maybe there is some conflict between the missions? Something like that every mission contains the file (but in different variants) and that confuses the updater? Like, for the first mission, it installs the correct file and deletes it from the _download folder. Then, for the second mission that file is suddenly missing. Something like that? Link to comment Share on other sites More sharing options...
SkateZilla Posted September 17, 2014 Share Posted September 17, 2014 Same problem, renaming, moving, deleting... and nothing Read the last Page, the Temporary solution is the uninstall the Training Missions. Or Should I just Edit the temp. solution into the first Post? Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs Link to comment Share on other sites More sharing options...
Mrmaverick Posted September 17, 2014 Author Share Posted September 17, 2014 Ok, its working now, downloaded the file on the DCS modules list, ran that, said it didnt work, restarted DCS then there it was in the module manager, loaded a quick mission, asked for the key code and all good. on the main screen it says its running ver 1.2.10.32095. is that the latest patch no:? Link to comment Share on other sites More sharing options...
SkateZilla Posted September 17, 2014 Share Posted September 17, 2014 (edited) Ok, its working now, downloaded the file on the DCS modules list, ran that, said it didnt work, restarted DCS then there it was in the module manager, loaded a quick mission, asked for the key code and all good. on the main screen it says its running ver 1.2.10.32095. is that the latest patch no:? you likely had an incomplete update due to the updater halting for the image.png not found error. Uninstall any Training Mission Modules, then re-run the updater. Edited September 17, 2014 by SkateZilla Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs Link to comment Share on other sites More sharing options...
Buzzles Posted September 17, 2014 Share Posted September 17, 2014 OK, after removing all the training files that I had installed (removing them using the uninstall button within the training modules), I was then able to perform an upgrade..... Of course this means having to reinstall the training material again afterwards....however many Gigabytes of data that is to download....AGAIN..... sheesh! Does indeed work. It also does mean there's definitely something wrong with the file manifest for the update, as it's obviously only trying to update the missions when they're installed. Fancy trying Star Citizen? Click here! Link to comment Share on other sites More sharing options...
Flagrum Posted September 17, 2014 Share Posted September 17, 2014 We had some issues with this file already in the past (1.2.4? can't remember atm). Whenever the updater ran, it would update the file. It swapped it every time for the previous version of it ( variant_a -> variant_b -> variant_a -> va ... etc.). While watching what the updater does right now, it seems it tries to replace it once more with the respective other version (one is a dark grey background with a red star, the other has some sky and clouds as background). c0ff should remember this case - if not, I can search and provide a link to the error report later. ... and bingo! I get the same error now with the install where the training missions are installed. I think, I had not all training missions installed (just 4), but in the _download folder I saw 8 missions. Maybe there is some conflict between the missions? Something like that every mission contains the file (but in different variants) and that confuses the updater? Like, for the first mission, it installs the correct file and deletes it from the _download folder. Then, for the second mission that file is suddenly missing. Something like that? Found the posting about the earlier issue with this file: http://forums.eagle.ru/showthread.php?t=120825 Link to comment Share on other sites More sharing options...
Carlo Pistolero Posted September 17, 2014 Share Posted September 17, 2014 Thanx, after removing training missions is everything ok! Link to comment Share on other sites More sharing options...
Python Posted September 17, 2014 Share Posted September 17, 2014 Success, I removed the Su-25 training missions, and the FC3 ones and the install worked. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Mrmaverick Posted September 17, 2014 Author Share Posted September 17, 2014 I get the same error when it asks to update. I downloaded the mig 21 module from the DCS modules and installed it that way, it said that didnt work but when i restarted the game the mig 21 was there, tried a mission with it, it asked for my key and it works. I havnt lost any modules , the f 15 c tab at the bottom is now gone, have fc3 anyway. have tried a server with mig 21s and that worked, but if i shut down and restart the computer and start DCS again it asks to update and still fails , but the mig 21 and everything else is all there. I only downloaded the training files for the Su-25T yesterday + all the others I didnt have and they all seem to work. Link to comment Share on other sites More sharing options...
Recommended Posts