pagadi-zaiet Posted October 6, 2015 Posted October 6, 2015 apart from the numerous crashes the picture is very washed out...way too bright and there`s no way to adjust that currently! performance is much better otherwise than in 1.2!!!
Deano87 Posted October 6, 2015 Posted October 6, 2015 Hi All. I have been playing around whit the settings in Nvidia Control Panel. If i change the Multi/Display/Mixed GPU to Multi Display Performance i get 9/10 whitout crash. This is only for the Create Fast Mission and any airplane. If i set "Start From" to runway it crash sometimes, airborn works 9/10 times for me, 10/10 whit the F15c. GTX 980 lastes driver and 0.7 runtime. Windows 7 or 10? Proud owner of: PointCTRL VR : Finger Trackers for VR -- Real Simulator : FSSB R3L Force Sensing Stick. -- Deltasim : Force Sensor WH Slew Upgrade -- Mach3Ti Ring : Real Flown Mach 3 SR-71 Titanium, made into an amazing ring. My Fathers Aviation Memoirs: 50 Years of Flying Fun - From Hunter to Spitfire and back again.
hellking Posted October 7, 2015 Posted October 7, 2015 WORKAROUND FOUND! All, after experimenting with it for 3 hours I have found a workaround for the DK2 crash problem. You simply need to run it in "Vista Compatibility" mode. 1) Right-click on DCS shortcut 2) Click on Properties 3) Go to compatibility tab 4) Select "Windows Vista" compatibility mode First impressions?? I have all settings High (make sure that VSYNC is off!) and no judder at all in the base. As crisp as FlyInside FSX: Amazing!! Let me know if it works for you. 10
hellking Posted October 7, 2015 Posted October 7, 2015 I believe I have found a workaround. See http://forums.eagle.ru/showpost.php?p=2507760&postcount=58
smirkza Posted October 7, 2015 Posted October 7, 2015 WORKAROUND FOUND! All, after experimenting with it for 3 hours I have found a workaround for the DK2 crash problem. You simply need to run it in "Vista Compatibility" mode. 1) Right-click on DCS shortcut 2) Click on Properties 3) Go to compatibility tab 4) Select "Windows Vista" compatibility mode First impressions?? I have all settings High (make sure that VSYNC is off!) and no judder at all in the base. As crisp as FlyInside FSX: Amazing!! Let me know if it works for you. By Jove, he's only gone and fixed it! Great work my man, works like a charm! Rep inbound... Cheers, Smirkza
sam777777 Posted October 7, 2015 Posted October 7, 2015 WORKAROUND FOUND! All, after experimenting with it for 3 hours I have found a workaround for the DK2 crash problem. You simply need to run it in "Vista Compatibility" mode. 1) Right-click on DCS shortcut 2) Click on Properties 3) Go to compatibility tab 4) Select "Windows Vista" compatibility mode First impressions?? I have all settings High (make sure that VSYNC is off!) and no judder at all in the base. As crisp as FlyInside FSX: Amazing!! Let me know if it works for you. Fixed for crash at "loading terrain" (Crashed 100% of the time at this point before) Now crashes at end of loading sequence as game loads into cockpit aprx 75% of the time BUT IT WORKS THE OTHER 25% OF THE TIME!!!!!!!! :):megalol: <VAAF> Virtual Australian Air-Force :thumbup::joystick::pilotfly:
Mt5_Roie Posted October 7, 2015 Posted October 7, 2015 (edited) WORKAROUND FOUND! All, after experimenting with it for 3 hours I have found a workaround for the DK2 crash problem. You simply need to run it in "Vista Compatibility" mode. 1) Right-click on DCS shortcut 2) Click on Properties 3) Go to compatibility tab 4) Select "Windows Vista" compatibility mode First impressions?? I have all settings High (make sure that VSYNC is off!) and no judder at all in the base. As crisp as FlyInside FSX: Amazing!! Let me know if it works for you. Awesome find...was able to play and actually save a replay of the flight! You are getting major credit in my next video buddy! I have all my settings on high and getting from 75-150 fps depending on where I'm looking. Will do more test flights this weekend. Edited October 7, 2015 by roiegat Coder - Oculus Rift Guy - Court Jester
Markeebo Posted October 7, 2015 Posted October 7, 2015 WORKAROUND FOUND! All, after experimenting with it for 3 hours I have found a workaround for the DK2 crash problem. You simply need to run it in "Vista Compatibility" mode. 1) Right-click on DCS shortcut 2) Click on Properties 3) Go to compatibility tab 4) Select "Windows Vista" compatibility mode First impressions?? I have all settings High (make sure that VSYNC is off!) and no judder at all in the base. As crisp as FlyInside FSX: Amazing!! Let me know if it works for you. +1 Works every time for me now! Rep inbound. You, good sir, are a genius! Markeebo
hansangb Posted October 7, 2015 Posted October 7, 2015 WORKAROUND FOUND! All, after experimenting with it for 3 hours I have found a workaround for the DK2 crash problem. You simply need to run it in "Vista Compatibility" mode. 1) Right-click on DCS shortcut 2) Click on Properties 3) Go to compatibility tab 4) Select "Windows Vista" compatibility mode First impressions?? I have all settings High (make sure that VSYNC is off!) and no judder at all in the base. As crisp as FlyInside FSX: Amazing!! Let me know if it works for you. I can't wait to try this out when I get back!! thanks for this. hansang hsb HW Spec in Spoiler --- i7-10700K Direct-To-Die/OC'ed to 5.1GHz, MSI Z490 MB, 32GB DDR4 3200MHz, EVGA 2080 Ti FTW3, NVMe+SSD, Win 10 x64 Pro, MFG, Warthog, TM MFDs, Komodo Huey set, Rverbe G1
joebloggs Posted October 7, 2015 Posted October 7, 2015 (edited) WORKAROUND FOUND! All, after experimenting with it for 3 hours I have found a workaround for the DK2 crash problem. You simply need to run it in "Vista Compatibility" mode. 1) Right-click on DCS shortcut 2) Click on Properties 3) Go to compatibility tab 4) Select "Windows Vista" compatibility mode First impressions?? I have all settings High (make sure that VSYNC is off!) and no judder at all in the base. As crisp as FlyInside FSX: Amazing!! Let me know if it works for you. This does seem more stable doing it this way. I do still crash at times when the mission has just about finished loading still though, but not as regular. Here's hope Wags can give use a quick fix if something as simple as changing this setting can improve the crashes. Maybe it narrows it down to what is causing it. Edit: Just want to say it also stopped judder for me at airports. Now I only have to turn off shadows. I'm also using windows 7 64. Thanks! Edited October 7, 2015 by joebloggs
Wynthorpe Posted October 7, 2015 Author Posted October 7, 2015 I'll try this tonight! Sounds positive.
Carabassa Posted October 7, 2015 Posted October 7, 2015 WORKAROUND FOUND! All, after experimenting with it for 3 hours I have found a workaround for the DK2 crash problem. You simply need to run it in "Vista Compatibility" mode. 1) Right-click on DCS shortcut 2) Click on Properties 3) Go to compatibility tab 4) Select "Windows Vista" compatibility mode First impressions?? I have all settings High (make sure that VSYNC is off!) and no judder at all in the base. As crisp as FlyInside FSX: Amazing!! Let me know if it works for you. It works :thumbup:. Thank You very, very, very much. I only have the base content and couldn't load any mission for the SU-25T. Only some instant action was working but most of the times crashed while loading and always with a crash on exit. Now it loads missions (not tried them all) and there is no crash on exit. Now I am ready for the next sale to b uy some juicy DLC's. With Windows 10 and non steam version of the simulator. Windows 10 - i7 950@3.80 GHz - RAM 6Gbytes - Gigabyte GTX790 G1 - Thrustmaster T-FLIGHT HOTAS X - Oculus Rift DK2
Mt5_Roie Posted October 7, 2015 Posted October 7, 2015 I was able to be online (which never worked for me before) and was able to get about 90% success. It still crashed after around 4-5 flights, but still a lot better then before. Plus, it no longer crashes each time when you end an flight either so I can actually save my replays. Great job! Coder - Oculus Rift Guy - Court Jester
Gunja Posted October 7, 2015 Posted October 7, 2015 It didn't CTD for me but i hoped this workaround will help to get rid of tracking lag and judder with everything on low... it didn't but i'm glad it's working for the rest of you. W8.1, i7-920 and HD7980
bongodriver Posted October 7, 2015 Posted October 7, 2015 WORKAROUND FOUND! All, after experimenting with it for 3 hours I have found a workaround for the DK2 crash problem. You simply need to run it in "Vista Compatibility" mode. 1) Right-click on DCS shortcut 2) Click on Properties 3) Go to compatibility tab 4) Select "Windows Vista" compatibility mode First impressions?? I have all settings High (make sure that VSYNC is off!) and no judder at all in the base. As crisp as FlyInside FSX: Amazing!! Let me know if it works for you. Worked for me, thanks :thumbup:
joebloggs Posted October 7, 2015 Posted October 7, 2015 It didn't CTD for me but i hoped this workaround will help to get rid of tracking lag and judder with everything on low... it didn't but i'm glad it's working for the rest of you. W8.1, i7-920 and HD7980 You don't need everything on low if you have a half decent Pc. The only two settings to lower for free flight are Visibility to low and shadows off. You will have to upgrade your rig if you have something poor because Wags won't be able to fix that for you.
Motomouse Posted October 7, 2015 Posted October 7, 2015 (edited) You made my day! Vista compatibility works for me too. Usually I reach 150 FPS with GTX 970 (75 while on ground) with high settings. What is the key to recenter the view? I think i am a little to small ;-) Edited October 7, 2015 by Motomouse VIC-20@1.108 MHz, onboard GPU, 5KB RAM, μυωπία goggles, Competition Pro HOTAS
LuSi_6 Posted October 7, 2015 Posted October 7, 2015 numpad 5 :) :pilotfly: Warthog HOTAS, Saitek Pedals, Oculus Rift :joystick:
ReviZorro Posted October 7, 2015 Posted October 7, 2015 Vista compatibility works perfectly! Thanks a lot, hellking! I9-9900K@5000, Z370, 32Gb DDR4 3200, RTX 3090, Dell UP3216q VPC MongoosT-50 CM2 Stick, Base (75+100 ext.) & Throttle, BRD KG-13B, adapted to use with Warthog connector, VKB MK20-3 Pro Pedals, 2 x Saitek Quadrant, Pimax Vision 8K Plus + 2 HTC Bases + Index Controllers + DAS A lot of 3D printed modifications for all above. Ultimaker 2+; Hardlight Sirius
Wynthorpe Posted October 7, 2015 Author Posted October 7, 2015 Still the same for me, judder at 100frames, if not at 150 then i have judder.
Deano87 Posted October 7, 2015 Posted October 7, 2015 Still the same for me, judder at 100frames, if not at 150 then i have judder. I believe this is because they have re-written the drivers in 0.7 to work with the CV1 Oculus which has 2 individual screens rather than one screen across both eyes like the DK2. So each eyes view counts as 1 frame. 100fps = 50fps actual in the DK2. 150fps = 75fps actual in the DK2 which is the DK2s native refresh rate.. hence why you no longer get judder at 150/75fps. Hope that made sense. Proud owner of: PointCTRL VR : Finger Trackers for VR -- Real Simulator : FSSB R3L Force Sensing Stick. -- Deltasim : Force Sensor WH Slew Upgrade -- Mach3Ti Ring : Real Flown Mach 3 SR-71 Titanium, made into an amazing ring. My Fathers Aviation Memoirs: 50 Years of Flying Fun - From Hunter to Spitfire and back again.
Deano87 Posted October 7, 2015 Posted October 7, 2015 WORKAROUND FOUND! All, after experimenting with it for 3 hours I have found a workaround for the DK2 crash problem. You simply need to run it in "Vista Compatibility" mode. 1) Right-click on DCS shortcut 2) Click on Properties 3) Go to compatibility tab 4) Select "Windows Vista" compatibility mode First impressions?? I have all settings High (make sure that VSYNC is off!) and no judder at all in the base. As crisp as FlyInside FSX: Amazing!! Let me know if it works for you. Works for me!!! Genius! :holiday::drink::drink::drink::drink::rotflmao: Proud owner of: PointCTRL VR : Finger Trackers for VR -- Real Simulator : FSSB R3L Force Sensing Stick. -- Deltasim : Force Sensor WH Slew Upgrade -- Mach3Ti Ring : Real Flown Mach 3 SR-71 Titanium, made into an amazing ring. My Fathers Aviation Memoirs: 50 Years of Flying Fun - From Hunter to Spitfire and back again.
Frusheen Posted October 7, 2015 Posted October 7, 2015 Still the same for me, judder at 100frames, if not at 150 then i have judder. I have very bad judder still as well but only when the dk2 is within view of the camera. If I move out of range I have silky smooth head tracking (but then of course no positional tracking). Not sure if it is related to frame rate. I'll lower graphics settings to check (gtx 780). Could others with high frame rates and judder test this camera theory and let me know what they find please. __________________________________________________Win 10 64bit | i7 7700k delid @ 5.1gHz | 32Gb 3466mhz TridentZ memory | Asus ROG Apex motherboard | Asus ROG Strix 1080Ti overclocked Komodosim Cyclic | C-tek anti torque pedals and collective | Warthog stick and throttle | Oculus Rift CV1 | KW-908 Jetseat | Buttkicker with Simshaker for Aviators RiftFlyer VR G-Seat project: http://forums.eagle.ru/showthread.php?p=2733051#post2733051
hellking Posted October 7, 2015 Posted October 7, 2015 I have found that the FPS performance very much dependent on the module I am using. Some modules get max FPS and 0 judder no matter where I am on the map. I see the grass, buildings far away, etc... But some other modules have judder even when I am far from bases or cities. The two modules: MIG-21 and UH-1 show very low performance, while almost all of the others (including KA-50 with it's large and complicated cockpit) are silky smooth.. I think developers need to optimize the low performing modules, or at least have an option in graphics settings to dial things down.
Recommended Posts