Jump to content

Swedish Hkp 9


Skjold

Recommended Posts

No Problem :) As far as I saw, only the Altitude Indicator was labeled in swedish "HÖJD".

 

Normaly they just keep the gauges as they are (from the manufacturer)...

 

Yeah... the Swedish military was pretty good in re-labeling pretty much anything. But the instruments where probably kept "as-is".

 

My point was not to insinuate any errors - just a comment of surprise.

2D/3D Artist

MILTECH-5 /PD

Lead 3D Artist - TrueGrit Virtual Technologies

[sIGPIC][/sIGPIC]

 

BO-105 PAH1A1/VBH / HKP-9A / BO-105 CBS-5 KLH

Eurofighter Typhoon

https://www.facebook.com/PolyDynamicsDCS/

 

 

 

 

Windows 10 (x64)

 

3x Corsair SSD GT 250 GB

Mainboard: Asus STRIX Z390-F

CPU: Intel Core I9-9900K @ 3.60GHz

RAM: 64 Gb

Graphics: MSI GForce GTX 980 TI 4GB

 

HOTAS Warthog

Hofmann Simpad Rudders

Oculus Rift / Oculus Touch

 

 

Heavy Metal is the law ! :punk:

 

 

Link to comment
Share on other sites

Hey guys,

 

Great work on the hkp9, Sweden has a very interesting military and especially the helicopters are all great, they chose all the cool ones imho!

 

I was wondering if the pedestal differs from the PAH version too. Perhaps through different radios or equipment or the layout in general? hkp9 cockpit images seem hard to find.

[sIGPIC][/sIGPIC]

Link to comment
Share on other sites

Hey guys,

 

Great work on the hkp9, Sweden has a very interesting military and especially the helicopters are all great, they chose all the cool ones imho!

 

I was wondering if the pedestal differs from the PAH version too. Perhaps through different radios or equipment or the layout in general? hkp9 cockpit images seem hard to find.

 

Thanks :). Yes, It differs from the PAH. There's also a different layout. I just saw one Panel which is also obstructed in the PAH.

 

cheers Olli

2D/3D Artist

MILTECH-5 /PD

Lead 3D Artist - TrueGrit Virtual Technologies

[sIGPIC][/sIGPIC]

 

BO-105 PAH1A1/VBH / HKP-9A / BO-105 CBS-5 KLH

Eurofighter Typhoon

https://www.facebook.com/PolyDynamicsDCS/

 

 

 

 

Windows 10 (x64)

 

3x Corsair SSD GT 250 GB

Mainboard: Asus STRIX Z390-F

CPU: Intel Core I9-9900K @ 3.60GHz

RAM: 64 Gb

Graphics: MSI GForce GTX 980 TI 4GB

 

HOTAS Warthog

Hofmann Simpad Rudders

Oculus Rift / Oculus Touch

 

 

Heavy Metal is the law ! :punk:

 

 

Link to comment
Share on other sites

The PAH-1 and HKP-9 look superb, great work Fragger.

HP G2 Reverb, Windows 10 VR settings: IPD is 64.5mm, High image quality, G2 reset to 60Hz refresh rate as standard. OpenXR user, Open XR tool kit disabled. Open XR was a massive upgrade for me.

DCS: Pixel Density 1.0, Forced IPD at 55 (perceived world size), 0 X MSAA, 0 X SSAA. My real IPD is 64.5mm. Prescription VROptition lenses installed. VR Driver system: I9-9900KS 5Ghz CPU. XI Hero motherboard and RTX 3090 graphics card, 64 gigs Ram, No OC at the mo. MT user  (2 - 5 fps gain). DCS run at 60Hz.

Vaicom user. Thrustmaster warthog user. MFG pedals with damper upgrade.... and what an upgrade! Total controls Apache MPDs set to virtual Reality height with brail enhancements to ensure 100% button activation in VR.. Simshaker Jet Pro vibration seat.. Uses data from DCS not sound.... you know when you are dropping into VRS with this bad boy.

Link to comment
Share on other sites

Progress on the front part of the Centerpanel of the BO-105 HKP-9A.

C_Panel_Starter_1.thumb.jpg.707bf36ee5db5e3a5ac57d88846d4c81.jpg

C_Panel_Starter_2.thumb.jpg.7f2a40b13f12d82c331f1ba398384408.jpg

C_Panel_Starter_3.thumb.jpg.9baeeccd1cd3de63e16ce0ad51662c66.jpg

C_Panel_Starter_4.thumb.jpg.cc06406693af88cf87795e28017603dc.jpg


Edited by The_Fragger

2D/3D Artist

MILTECH-5 /PD

Lead 3D Artist - TrueGrit Virtual Technologies

[sIGPIC][/sIGPIC]

 

BO-105 PAH1A1/VBH / HKP-9A / BO-105 CBS-5 KLH

Eurofighter Typhoon

https://www.facebook.com/PolyDynamicsDCS/

 

 

 

 

Windows 10 (x64)

 

3x Corsair SSD GT 250 GB

Mainboard: Asus STRIX Z390-F

CPU: Intel Core I9-9900K @ 3.60GHz

RAM: 64 Gb

Graphics: MSI GForce GTX 980 TI 4GB

 

HOTAS Warthog

Hofmann Simpad Rudders

Oculus Rift / Oculus Touch

 

 

Heavy Metal is the law ! :punk:

 

 

Link to comment
Share on other sites

Progress on the front part of the Centerpanel of the BO-105 HKP-9A.

Silly question: Is the Day/Night switch supposed to be labeled NGV? I'm not saying it's a mistake, just wondering what it stands for("Night Gision Voggles" came to mind :D).

Link to comment
Share on other sites

Silly question: Is the Day/Night switch supposed to be labeled NGV? I'm not saying it's a mistake, just wondering what it stands for("Night Gision Voggles" came to mind :D).

ooops-I was typing too fast :). You are right. I will correct it. Thanks

2D/3D Artist

MILTECH-5 /PD

Lead 3D Artist - TrueGrit Virtual Technologies

[sIGPIC][/sIGPIC]

 

BO-105 PAH1A1/VBH / HKP-9A / BO-105 CBS-5 KLH

Eurofighter Typhoon

https://www.facebook.com/PolyDynamicsDCS/

 

 

 

 

Windows 10 (x64)

 

3x Corsair SSD GT 250 GB

Mainboard: Asus STRIX Z390-F

CPU: Intel Core I9-9900K @ 3.60GHz

RAM: 64 Gb

Graphics: MSI GForce GTX 980 TI 4GB

 

HOTAS Warthog

Hofmann Simpad Rudders

Oculus Rift / Oculus Touch

 

 

Heavy Metal is the law ! :punk:

 

 

Link to comment
Share on other sites

Its gonna be problem keeping my eyes on where I am flying and not on the awesome pit with this level of detail!

HP G2 Reverb, Windows 10 VR settings: IPD is 64.5mm, High image quality, G2 reset to 60Hz refresh rate as standard. OpenXR user, Open XR tool kit disabled. Open XR was a massive upgrade for me.

DCS: Pixel Density 1.0, Forced IPD at 55 (perceived world size), 0 X MSAA, 0 X SSAA. My real IPD is 64.5mm. Prescription VROptition lenses installed. VR Driver system: I9-9900KS 5Ghz CPU. XI Hero motherboard and RTX 3090 graphics card, 64 gigs Ram, No OC at the mo. MT user  (2 - 5 fps gain). DCS run at 60Hz.

Vaicom user. Thrustmaster warthog user. MFG pedals with damper upgrade.... and what an upgrade! Total controls Apache MPDs set to virtual Reality height with brail enhancements to ensure 100% button activation in VR.. Simshaker Jet Pro vibration seat.. Uses data from DCS not sound.... you know when you are dropping into VRS with this bad boy.

Link to comment
Share on other sites

  • 2 weeks later...

Hello dear simmers,

 

The Centerpanel of the swedish HKP-9A is almost textured. Just the Transponder left. Here's some eyecandy for you. Enjoy :)

 

http://puu.sh/mWw8m/2a0eb601eb.jpg

 

http://puu.sh/mWw1A/098e232ecd.jpg

 

http://puu.sh/mWwd7/a8149d8498.jpg

 

http://puu.sh/mWwev/6935cd8bfc.jpg

  • Like 1

2D/3D Artist

MILTECH-5 /PD

Lead 3D Artist - TrueGrit Virtual Technologies

[sIGPIC][/sIGPIC]

 

BO-105 PAH1A1/VBH / HKP-9A / BO-105 CBS-5 KLH

Eurofighter Typhoon

https://www.facebook.com/PolyDynamicsDCS/

 

 

 

 

Windows 10 (x64)

 

3x Corsair SSD GT 250 GB

Mainboard: Asus STRIX Z390-F

CPU: Intel Core I9-9900K @ 3.60GHz

RAM: 64 Gb

Graphics: MSI GForce GTX 980 TI 4GB

 

HOTAS Warthog

Hofmann Simpad Rudders

Oculus Rift / Oculus Touch

 

 

Heavy Metal is the law ! :punk:

 

 

Link to comment
Share on other sites

looks superb.

HP G2 Reverb, Windows 10 VR settings: IPD is 64.5mm, High image quality, G2 reset to 60Hz refresh rate as standard. OpenXR user, Open XR tool kit disabled. Open XR was a massive upgrade for me.

DCS: Pixel Density 1.0, Forced IPD at 55 (perceived world size), 0 X MSAA, 0 X SSAA. My real IPD is 64.5mm. Prescription VROptition lenses installed. VR Driver system: I9-9900KS 5Ghz CPU. XI Hero motherboard and RTX 3090 graphics card, 64 gigs Ram, No OC at the mo. MT user  (2 - 5 fps gain). DCS run at 60Hz.

Vaicom user. Thrustmaster warthog user. MFG pedals with damper upgrade.... and what an upgrade! Total controls Apache MPDs set to virtual Reality height with brail enhancements to ensure 100% button activation in VR.. Simshaker Jet Pro vibration seat.. Uses data from DCS not sound.... you know when you are dropping into VRS with this bad boy.

Link to comment
Share on other sites

Very nice!

 

Do you have any release date yet?

 

Will be announced in late 2016 maybe 2017

2D/3D Artist

MILTECH-5 /PD

Lead 3D Artist - TrueGrit Virtual Technologies

[sIGPIC][/sIGPIC]

 

BO-105 PAH1A1/VBH / HKP-9A / BO-105 CBS-5 KLH

Eurofighter Typhoon

https://www.facebook.com/PolyDynamicsDCS/

 

 

 

 

Windows 10 (x64)

 

3x Corsair SSD GT 250 GB

Mainboard: Asus STRIX Z390-F

CPU: Intel Core I9-9900K @ 3.60GHz

RAM: 64 Gb

Graphics: MSI GForce GTX 980 TI 4GB

 

HOTAS Warthog

Hofmann Simpad Rudders

Oculus Rift / Oculus Touch

 

 

Heavy Metal is the law ! :punk:

 

 

Link to comment
Share on other sites

Centerconsole of the BO-105 HKP-9A with HELITOW Control unit/Armrest is done.

Just the Roof-Console, the Optics and the Firing Stick (at the LH Strut) left to model/texture...

926235877_ss(2016-02-08at01_37.19).thumb.jpg.cca335b78c96eb11e04c72fe2569fa85.jpg

1705652019_ss(2016-02-08at01_36.49).thumb.jpg.2dd822af66264c4de4197ebcfdab5732.jpg

1431952234_ss(2016-02-08at01_36.08).thumb.jpg.4b805be285fc3ac2c91a1d413bc9dc51.jpg

  • Like 1

2D/3D Artist

MILTECH-5 /PD

Lead 3D Artist - TrueGrit Virtual Technologies

[sIGPIC][/sIGPIC]

 

BO-105 PAH1A1/VBH / HKP-9A / BO-105 CBS-5 KLH

Eurofighter Typhoon

https://www.facebook.com/PolyDynamicsDCS/

 

 

 

 

Windows 10 (x64)

 

3x Corsair SSD GT 250 GB

Mainboard: Asus STRIX Z390-F

CPU: Intel Core I9-9900K @ 3.60GHz

RAM: 64 Gb

Graphics: MSI GForce GTX 980 TI 4GB

 

HOTAS Warthog

Hofmann Simpad Rudders

Oculus Rift / Oculus Touch

 

 

Heavy Metal is the law ! :punk:

 

 

Link to comment
Share on other sites

Looking very good and definitely worth the wait. At least we will soon have the gazelle to keep us busy while you finish this one off!

System Specs: i7 8700k @ 5.0GHz (not delidded), ASRock Extreme4 Z370 MOBO, EVGA GTX 1080 SC 8GB, 32GB Corsair Vengeance LPX 3200MHz DDR4 RAM, Samsung Evo 240GB SSD, Samsung Evo 500GB SSD, 1TB HDD, Noctura NH-D15S Heat Sink, Acer VE278H 27" 1080p Monitor, Ocukus Rift CV1.

 

Controllers: TrackIR 5, Thrustmaster HOTAS X, Saitek Throttle Quadrant (with DIY removable collective mod), Saitek Pro Flight Rudder Pedals.

 

Just trying to keep my number of takeoffs and landings equal!

Link to comment
Share on other sites

  • 1 month later...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...