jimcarrel Posted September 7, 2015 Posted September 7, 2015 you must follow the direction exactly to remove the signed driver check, please -re-read and follow the instructions on the link provided... :joystick: it worked for me.. ========================= X52, X52 Pro and X65f - Windows 10, 64 bit – During stage 4 the driver may not over install correctly due to an older signed driver taking priority over the beta version. To resolve this: Hold down the shift key on your keyboard, keep it held down. Click the Start button, click power and then click restart. You can release the Shift key. You will be presented with a light blue screen with some options. Select Troubleshoot > Advanced Options > Start up Settings, then click restart. When the Startup Settings screen appears press F7 on your keyboard. Windows will continue to load as normal. Rerun the driver installation. When prompted, click the install driver anyway option, to get the latest version installed correctly. I had repeating command problem after 1st install of new beta's until I did the above process. Just reinstall over the first install. Only problem left for me is Win 10 still does not go to sleep with X52 plugged in. Win 10 64 bit Intel I-7 7700K 32GB Ram Nvidia Geforce GTX 1060 6gig
FOXFIRE TWOONE Posted September 8, 2015 Posted September 8, 2015 I tried the beta's out, and nothing has changed. Some commands still will not work. I did everything correct to no avail. Ok I got the beta diver and solfware properly install and working. Pryor I was only looking at the driver number in properties under devise manager, and they were all showing the beta driver number. Then I looked in the Saitek control panel, under ( about ) and the 7.20.13 driver was showing installed. So I went over the install procedure again and the beta driver showed up in control panel. :) :thumbup: I feel much better now. Intel core I9 10900K 3.7 ghz Asrock Z490 Extreme4 G-SKill Ripjaws V 32GB Cooler Master 120m GTX 980 Superclocked Corsair AX850w psu Samsung 1 T M.2 2 X 850 ssd's Sony 48 in HD TV Trackir 5 Hotas Warthog F/A-18C Hornet Grip Logitech Pro Peddles Windows 10 64
DAZnBLAST Posted September 9, 2015 Posted September 9, 2015 Great the drivers work, but I'm not disabling the driver signing check built into Windows. I'll stick with the SD6 drivers until signed Win10 drivers arrive. My Hangar: F16C | FA18C | AH64D | F14A/B | M2000C | AV8B | A10C/ii | KA50/iii | Chinook | UH1H | OH58 | Gazelle | FC3 | CA | Supercarrier My Spec: Obsidian750D Airflow | Z690 Tomahawk | 12700K | 128GB DDR4 Vengeance @3600 | RTX3080 12GB OC | ZXR PCIe | WD Black 2TB SSD | Log X56 | Log G502 | TrackIR | 1 badass mutha
ED Team BIGNEWY Posted September 10, 2015 ED Team Posted September 10, 2015 from facebook https://www.facebook.com/SaitekProFlight?fref=nf Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status Windows 11, NVIDIA MSI RTX 3090, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 64GB DDR @3200, ASUS ROG Strix Z490-F Gaming, PIMAX Crystal
Ulman Posted September 16, 2015 Posted September 16, 2015 So do you guys getting it back to work? Ive made a clean install of Win10 Pro few days ago, but my X-52 (non-Pro) still wont work in DCS. I tried it with the Win10 Beta Drivers. But with them the LCD on the Throttle and almost every key and POV Hats didnt worked. Same with an older driver & SST, except for the LCD Bug. Dont know what else i could try. Any advices please? :dunno: Windows 10 Pro 64bit | Intel I5-3570K @ 3.80 GHz | ASrock Z77 Professional-M | Zotac GTX 970 | 16GB DDR3 @ 2400 MHz TM Hotas Warthog | Saitek Pro Flight Rudder | TrackIR 5
DAZnBLAST Posted September 18, 2015 Posted September 18, 2015 Cannot answer this as we are talking about the Pro version of X52. Have you tried talking directly to Saitek support? My Hangar: F16C | FA18C | AH64D | F14A/B | M2000C | AV8B | A10C/ii | KA50/iii | Chinook | UH1H | OH58 | Gazelle | FC3 | CA | Supercarrier My Spec: Obsidian750D Airflow | Z690 Tomahawk | 12700K | 128GB DDR4 Vengeance @3600 | RTX3080 12GB OC | ZXR PCIe | WD Black 2TB SSD | Log X56 | Log G502 | TrackIR | 1 badass mutha
Akatsuki Posted September 20, 2015 Posted September 20, 2015 Saitek has released new drivers and software. They are still in beta though: ftp://ftp.saitek.com/pub/software/beta/Windows10/ I haven't tested them yet.
Rapidfire Posted September 22, 2015 Posted September 22, 2015 well the new 704212 are working great, so far so good.:thumbup: :music_whistling:
HiJack Posted September 22, 2015 Posted September 22, 2015 well the new 704212 are working great, so far so good.:thumbup: Can you unplug the stick and Windows still works?
Rapidfire Posted September 22, 2015 Posted September 22, 2015 Can you unplug the stick and Windows still works? I don't use the joystick I just use the throttle controller and a CH fighter stick and Saitek rudder pedals x52 CH Fighter stick Saitek pro rudder pedals :music_whistling:
Ulman Posted September 22, 2015 Posted September 22, 2015 Saitek has released new drivers and software. They are still in beta though: ftp://ftp.saitek.com/pub/software/beta/Windows10/ I haven't tested them yet. Yeah they worked. Finally i can use my X52 nonPro again :joystick: Windows 10 Pro 64bit | Intel I5-3570K @ 3.80 GHz | ASrock Z77 Professional-M | Zotac GTX 970 | 16GB DDR3 @ 2400 MHz TM Hotas Warthog | Saitek Pro Flight Rudder | TrackIR 5
Rapidfire Posted September 24, 2015 Posted September 24, 2015 new TS3 update doesn't allow the 704212 beta SST to work in game with the keyboard key press again. :pilotfly: :music_whistling:
HiJack Posted September 28, 2015 Posted September 28, 2015 New drivers released: ftp://ftp.saitek.com/pub/software/beta/Windows10/ EDIT: Sorry, just for the Yoke :)
Akatsuki Posted November 13, 2015 Posted November 13, 2015 Watch out ! X-52PRO drivers don't work with the latest "big" Windows 10 update. I had to revert to the previous WIN10 built.
Tello Posted November 13, 2015 Posted November 13, 2015 Not on my side - THough - I normally turn all the ligths off - After restart my MFD light was on and even that it still said off in the control panel I simply had to move the slider a little and the thing light went off again. Watch out ! X-52PRO drivers don't work with the latest "big" Windows 10 update. I had to revert to the previous WIN10 built. [sIGPIC][/sIGPIC]
Heli Shed Posted November 19, 2015 Posted November 19, 2015 New drivers today. Anyone had a chance to test? Good news worked fine for me!! Come pay us a visit on YouTube - search for HELI SHED
aap_flanker Posted December 7, 2015 Posted December 7, 2015 New drivers today. Anyone had a chance to test? After the big win 10 update... My x52pro stopped working. Not even the new drivers make it work. I will try with older drivers :/ Intel i5 11700F + H80 | 4x4GB 3200mhz RAM | AORUS ELITE B560M | Samsung 850 PRO SSD 256gb| KINGSTON SA400 480GB SSD | WD 500GB | Gigabyte GTX 1070 8GB | Antec 1200 PSU | Thrustmaster Warthog HOTAS and homemade panels and rudder pedals | 24" Samsung T24C550 @60Hz 2ms | Opentrack 3 led clip
pepin1234 Posted December 8, 2015 Posted December 8, 2015 After the big win 10 update... My x52pro stopped working. Not even the new drivers make it work. I will try with older drivers :/ Someone else can confirm this? [sIGPIC][/sIGPIC]
sniperwolfpk5 Posted December 8, 2015 Posted December 8, 2015 Yes new drivers are nightmare. Please don't install it. It don't work properly. I reverted back to older version. That I already mentioned in this thread Win10, Intel 3rd Gen. Core i7 3.8Ghz, 20GB ram, Nvidia Geforce 1060 6GB Opentrack (Download it from HERE), PS3 Eye, Saitek x52-pro Joystick, DIY Rudder Pedals, Google Cardboard with DCS World English is not my native language
sniperwolfpk5 Posted December 8, 2015 Posted December 8, 2015 For me these are the best drivers. I have only issue with switching profiles. Win10, Intel 3rd Gen. Core i7 3.8Ghz, 20GB ram, Nvidia Geforce 1060 6GB Opentrack (Download it from HERE), PS3 Eye, Saitek x52-pro Joystick, DIY Rudder Pedals, Google Cardboard with DCS World English is not my native language
Tone71 Posted December 8, 2015 Posted December 8, 2015 Are you using the release drivers (no longer in beta)? These work fine for me. Make sure you uninstall all old Saitek software and drivers first, including Programming Support in Device Manager (show hidden devices), reboot, then install. Windows 10 Home, Intel Core i7-9700K @ 4.6GHz, Gigabyte GTX 1070 G1 Gaming (8GB VRAM) on 34" LG curved monitor @ 3440x1440, 32GB RAM, TrackIR 3 (with Vector Expansion), Thrustmaster Warthog HOTAS, Saitek Combat Pedals, Thrustmaster Cougar MFDs.
pepin1234 Posted December 8, 2015 Posted December 8, 2015 We need confirmation the last Win 10 drivers are buggy for you guys [sIGPIC][/sIGPIC]
sniperwolfpk5 Posted December 8, 2015 Posted December 8, 2015 Sorry I was trying latest beta drivers. Did they release normal drivers for win10? Win10, Intel 3rd Gen. Core i7 3.8Ghz, 20GB ram, Nvidia Geforce 1060 6GB Opentrack (Download it from HERE), PS3 Eye, Saitek x52-pro Joystick, DIY Rudder Pedals, Google Cardboard with DCS World English is not my native language
sniperwolfpk5 Posted December 8, 2015 Posted December 8, 2015 OK great they have released Windows 10 drivers. I will try it today and let you know Win10, Intel 3rd Gen. Core i7 3.8Ghz, 20GB ram, Nvidia Geforce 1060 6GB Opentrack (Download it from HERE), PS3 Eye, Saitek x52-pro Joystick, DIY Rudder Pedals, Google Cardboard with DCS World English is not my native language
Recommended Posts