Ala12Rv-Tundra Posted December 14, 2019 Posted December 14, 2019 hreich said: The main thing that fixed my problem was complete cleaning of saved game/dcs open beta folder (but make a copy first, so you can return later your input config etc) Apparantely, it´s working on my side. More testing tonight. What I did was modifying this file: \SavedGames\DCS\Scripts\Export.lua Open and edit, deleting the part related to VAICOM local vaicomlfs = require('lfs'); dofile(vaicomlfs.writedir()..[[scripts\VAICOMPRO\VAICOMPRO.export.lua]]) i5 8400 | 32 Gb RAM | RTX 2080Ti | Virpil Mongoose T-50 base w/ Warthog & Hornet sticks | Warthog throttle | Cougar throttle USB | Orion 2 throttle base w/ Viper & Hornet grips| VKB T-Rudder Mk IV | Oculus Rift S | Buddy-Fox A-10 UFC | 2x TM MFDs & 1x WW DDI | 2x Bass shakers | SIMple SIMpit chair | WW TakeOff panel | Andre JetSeat | WW Hornet UFC | WW Viper ICP FC3 - Warthog - F-5E - Harrier - NTTR - Hornet - Tomcat - Huey - Viper - C-101 - PG - Hip - SuperCarrier - Syria - Warthog II - Hind - South Atlantic - Sinai - Strike Eagle - Phantom - Mirage F1 - Afghanistan - Irak
Calicrook Posted December 14, 2019 Posted December 14, 2019 I had a question about the PTT for the intercom, TX5. I know when I use the keyboard and press the 5 button it works as it should (press and hold for listening, release for stop listening) I am trying to bind that to my TX4 on my TM warthog by disabling the TX4 command and switching it to TX5 but when I do that and press and hold nothing happens. When I release the button it now starts listening. I can't figure out a way to fix this i7-6700k| 32GB ram| GTX 2080 founders edition| Oculus Rift 2 My WIP Youtube
MAXsenna Posted December 14, 2019 Posted December 14, 2019 Calicrook said: I had a question about the PTT for the intercom, TX5. I know when I use the keyboard and press the 5 button it works as it should (press and hold for listening, release for stop listening) I am trying to bind that to my TX4 on my TM warthog by disabling the TX4 command and switching it to TX5 but when I do that and press and hold nothing happens. When I release the button it now starts listening. I can't figure out a way to fix thisThat's strange. It's almost as they've been swapped around. You haven't by chance mapped it in Voice Attack config? Sent from my ANE-LX1 using Tapatalk
Calicrook Posted December 14, 2019 Posted December 14, 2019 MAXsenna said: That's strange. It's almost as they've been swapped around. You haven't by chance mapped it in Voice Attack config? Sent from my ANE-LX1 using Tapatalk Nope Haven't changed it at all, BUT since posting this I did try unchecking shortcut is invoked check box on the transmit function, and left it checked on the the stop transmitting function and it seemed to have fixed it for now. I guess I will test it in game. But all the other keybinds have that checked on both functions so I don't know how it works...:pilotfly: i7-6700k| 32GB ram| GTX 2080 founders edition| Oculus Rift 2 My WIP Youtube
MAXsenna Posted December 14, 2019 Posted December 14, 2019 Calicrook said: Nope Haven't changed it at all, BUT since posting this I did try unchecking shortcut is invoked check box on the transmit function, and left it checked on the the stop transmitting function and it seemed to have fixed it for now. I guess I will test it in game. But all the other keybinds have that checked on both functions so I don't know how it works...:pilotfly:Well, as long as it works! I have "Shortcut is disabled" on all my TXs for my part! Sent from my ANE-LX1 using Tapatalk
Japo32 Posted December 14, 2019 Posted December 14, 2019 (edited) Tundra said: Apparantely, it´s working on my side. More testing tonight. What I did was modifying this file: \SavedGames\DCS\Scripts\Export.lua Open and edit, deleting the part related to VAICOM local vaicomlfs = require('lfs'); dofile(vaicomlfs.writedir()..[[scripts\VAICOMPRO\VAICOMPRO.export.lua]]) That apparently seems to work BUT NOT. When you change module it breaks again.. BUT I FOUND THE CULPRIT!!! I had to make a lot of changes as it appearently was working, but when loaded other plane it alwasy was broken. The culprit is: DCS-SRS MOD. The Simple radio!!!! At least the last version that introduced the option to show msg in screen or whatever.... I don't know if loading the SRS works, but when you don't load the client appart from DCS it don't allow to recognize the mic in voiceAttack. So I believe that Hollywood has to talk with the SRS creator to make a fix for this. :music_whistling: Meanwhile, to make it work, go to the SavedGames/DCS_beta/Mods folder and remove the DCS-SRS folder. Edited December 14, 2019 by Japo32
MAXsenna Posted December 14, 2019 Posted December 14, 2019 Japo32 said: That apparently seems to work BUT NOT. When you change module it breaks again.. BUT I FOUND THE CULPRIT!!! I had to make a lot of changes as it appearently was working, but when loaded other plane it alwasy was broken. The culprit is: DCS-SRS MOD. The Simple radio!!!! At least the last version that introduced the option to show msg in screen or whatever.... I don't know if loading the SRS works, but when you don't load the client appart from DCS it don't allow to recognize the mic in voiceAttack. So I believe that Hollywood has to talk with the SRS creator to make a fix for this. :music_whistling:Cool! Does it matter if SRS options are checked in VAICOM PRO control panel? Sent from my ANE-LX1 using Tapatalk
kaltokri Posted December 16, 2019 Posted December 16, 2019 Solution does not work for me. Yes, after deinstall of SRS the instant "Listening suspended" disapears. But every 10 seconds I got "Listening suspended" and the airport mesages etc. For now I have disabled VAICOM completly until the issue is fixed. :( SYSTEM: Mainboard MSI MEG X570 | CPU Ryzen 7 5800X @ 4.5 GHz | RAM 64 GB @ 3200 MHz | GPU GIGABYTE RTX 4090 | 1 TB SSD | Win 10 x64 DEVICES: ASUS 27" LCD | TrackIR 5 | LukeClip | Quest 3 | PointCTRL | Virpil HOTAS | MFG Crosswind | TableMount MonsterTech MODULES: To much to list. But I stopped buying more, because of too much bugs in e.g. A-10C(II). @ED: Fix the bugs and I spend money on modules again. Promised. PROJECTS: OpenFlightSchool: DE / EN
DarkStar79 Posted December 16, 2019 Posted December 16, 2019 Can any explain if AIRIO works to make Custom waypoints in multiplayer from the F10 map? I have never got it to work! It really needs to work in MP!
MAXsenna Posted December 16, 2019 Posted December 16, 2019 (edited) kaltokri said: Solution does not work for me. Yes, after deinstall of SRS the instant "Listening suspended" disapears. But every 10 seconds I got "Listening suspended" and the airport mesages etc. For now I have disabled VAICOM completly until the issue is fixed. :( Guess I was too early then. I had too bloody boot my PC and restart DCS and kick it several times, after I removed SRS, BEFORE DCS wanted to start again. Are you 100% positive there are no "dobbled mapped" joystick inputs. Voice Attack did change it you know in the latest update, from 2 to 4 joysticks. What I would do at this point is: Have VAICOM PRO Voice Attack profile active. Edit the profile and REMOVE ALL your TX bindings, apply and save for good measure. Close Voice Attack, and restart it. And then bind the TXs again. Edited December 16, 2019 by MAXsenna
tapi Posted December 17, 2019 Posted December 17, 2019 I am considering to buy VAICOM but I am not sure if it works with my current VA profile for DCS this way: Now I use VA to control my cockpits and I do not use PTT all. I am OK with using PTT for VAICOM commands to control AI, but I do not want to use PTT to control my aircraft. Is it possible to attach e.g. my DCS Spitfire profile via DAISY-CHAIN to VAICOM VA profile and use PTT only for VAICOM comands? THX Smoke me a kipper I'll be back for breakfast! (Ken Gatward before his solo Beaufighter mission 1943)See vid here HW: i7-12700K, 32 GB RAM, MB PRO Z690-A DDR4 , GTX 3080, LCD UltraWQHD (3440x1440) G-SYNC 120Hz,Tobii Eye Tracker 5, VKB Gunfighter III (KG12 WWII), MFG Crosswind, AuthentiKit Throttle & Trims, Windows 11 64-bit
Phantomflyer65 Posted December 18, 2019 Posted December 18, 2019 Anyone else having issues since latest update? I'm running Open Beta and Vaicom Pro doesn't seem to be working anymore. There's no longer any audio hints and you can no longer hear ATC or the Crew Chief or Tankers replying. It was working great before the update. Any ideas? Thanks
Chopper A-10 Posted December 19, 2019 Posted December 19, 2019 Having the same issues . . . flew last night, updated, VoiceAttack now not working . . was looking to see if other had same issue . . i7-7700K 4.20Ghz | GeForce GTX 1080Ti DUKE | ASUS Maximus IX Hero Z270 | Samsung 960 | Corsair CPU Cooler | G.SKILL 32GB | Oculus VR Rift | Saitek PRO Pedals & TM HOTAS Warthog Throttle & Joystick |
speed-of-heat Posted December 19, 2019 Posted December 19, 2019 yep same here SYSTEM SPECS: Hardware AMD 9800X3D, 64Gb RAM, 4090 FE, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO YOUTUBE CHANNEL: @speed-of-heat
hreich Posted December 19, 2019 Posted December 19, 2019 Chopper A-10 and stuartaston - you uodated to latest Open beta? [sIGPIC][/sIGPIC] Pilot from Croatia
speed-of-heat Posted December 19, 2019 Posted December 19, 2019 yep SYSTEM SPECS: Hardware AMD 9800X3D, 64Gb RAM, 4090 FE, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO YOUTUBE CHANNEL: @speed-of-heat
jameslockridge Posted December 19, 2019 Posted December 19, 2019 Every time I update DCS it has seemed to brake VA for a day or so. Then slowly things came back not from anything that I've done that I know of to fix it. Each time this happened I debate if I should report it because I wasn't sure it was't something I had done wrong during updating.
speed-of-heat Posted December 19, 2019 Posted December 19, 2019 its the nature of running the open beta I think SYSTEM SPECS: Hardware AMD 9800X3D, 64Gb RAM, 4090 FE, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO YOUTUBE CHANNEL: @speed-of-heat
Greyman Posted December 19, 2019 Posted December 19, 2019 I always delete export.lua after every DCS update, as that is likely to solve at least some, if not most, of these types of issues. The file will be in your /Users/<username>/<DCS folder>/Scripts folder
speed-of-heat Posted December 19, 2019 Posted December 19, 2019 yep that worked, thanks ! SYSTEM SPECS: Hardware AMD 9800X3D, 64Gb RAM, 4090 FE, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO YOUTUBE CHANNEL: @speed-of-heat
Phantomflyer65 Posted December 19, 2019 Posted December 19, 2019 Greyman said: I always delete export.lua after every DCS update, as that is likely to solve at least some, if not most, of these types of issues. The file will be in your /Users/<username>/<DCS folder>/Scripts folder Just go in and delete it? Is another export.lua produced on its own?
speed-of-heat Posted December 19, 2019 Posted December 19, 2019 yes , but, I also have combat flight, so I copied the line from there first and then added it back into the lua after it gets recreated SYSTEM SPECS: Hardware AMD 9800X3D, 64Gb RAM, 4090 FE, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO YOUTUBE CHANNEL: @speed-of-heat
jameslockridge Posted December 20, 2019 Posted December 20, 2019 Greyman said: I always delete export.lua after every DCS update, as that is likely to solve at least some, if not most, of these types of issues. The file will be in your /Users/<username>/<DCS folder>/Scripts folder Thanks I think that's what I have been missing. I'm going to try that with next upgrade.
Phantomflyer65 Posted December 20, 2019 Posted December 20, 2019 Greyman said: I always delete export.lua after every DCS update, as that is likely to solve at least some, if not most, of these types of issues. The file will be in your /Users/<username>/<DCS folder>/Scripts folder That worked. I'll have to remember from now to go to that if I'm seeing problems after an update. Thanks for your help!
Recommended Posts