KittyVCAW-1 Posted September 17, 2019 Share Posted September 17, 2019 I've been trying to figure it out for months. The other day had Bit test not initiate and stick input was ineffective after shut down and restart on the stennis. Was playing with stuff, unfolded the wings and the BIT test ran as usual after the wings unfolded. Going to try again maybe tomorrow night. I always set parking break 1st thing after coming to a stop so I know that wasn't the issue. Ever since I got the hornet I figured I was shutting it down wrong. What I am unsure of is weather or not NWS is actuated on the restart. Will have to pay closer attention to it next time. Also had INS ATT caution message after restart on left DDI. I have no clue what that means or what to do about it either. Also Standby Attitude Reference Indicator would not uncage after restart. Nobody likes me because I'm unsafe. Link to comment Share on other sites More sharing options...
KittyVCAW-1 Posted September 19, 2019 Share Posted September 19, 2019 BIt fail and INS ATT message Here is a track of the issues I'm having. I tried to show everything I could think of. Shutdown and restart procedure is at the end of the flight.INS ATT.trk Nobody likes me because I'm unsafe. Link to comment Share on other sites More sharing options...
ED Team BIGNEWY Posted September 19, 2019 ED Team Share Posted September 19, 2019 Hi I have spoken to the team, some aspects of the FCS bit test are still W.I.P They will address this issue in a future patch. Thanks Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status Windows 11, NVIDIA MSI RTX 3090, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 64GB DDR @3200, ASUS ROG Strix Z490-F Gaming, HP Reverb G2 Link to comment Share on other sites More sharing options...
Pâte Posted September 28, 2019 Share Posted September 28, 2019 Hi I have spoken to the team, some aspects of the FCS bit test are still W.I.P They will address this issue in a future patch. Thanks Any even roughly ideas on when we can hope this to be solved ? :) [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
ED Team NineLine Posted September 28, 2019 ED Team Share Posted September 28, 2019 Sorry Pâte, we havent been given any sort of timeline right now. Forum Rules • My YouTube • My Discord - NineLine#0440• **How to Report a Bug** Link to comment Share on other sites More sharing options...
Pâte Posted September 29, 2019 Share Posted September 29, 2019 Sorry Pâte, we havent been given any sort of timeline right now. Copy :thumbup: [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
marek.babic Posted February 8, 2020 Share Posted February 8, 2020 This is an annoying bug. Cant they just fix it? It is not possible to restart hornet :/ Link to comment Share on other sites More sharing options...
Syndrome Posted July 24, 2020 Share Posted July 24, 2020 So has anyone confirmed what causes the problem, how to avoid it? I encountered it when I was rapidly shutting down engines without reversing every step on the startup in order, and also changing the loadout. Not sure what triggered the issue, but maybe something to do a hydraulic failure? I tried meticulously shutting down the jet, and restarting and that seemed to work just fine with the FCS test giving a "GO" reading on BIT page before testing rather than the "RESTRT" Error message that just leads to the LEF control surface failure that I experienced when the BIT test failed. Link to comment Share on other sites More sharing options...
Tholozor Posted July 25, 2020 Share Posted July 25, 2020 Related to this perhaps? https://forums.eagle.ru/showthread.php?t=272711 REAPER 51 | Tholozor VFA-136 (c.2007): https://www.digitalcombatsimulator.com/en/files/3305981/ Arleigh Burke Destroyer Pack (2020): https://www.digitalcombatsimulator.com/en/files/3313752/ Link to comment Share on other sites More sharing options...
KittyVCAW-1 Posted December 22, 2020 Share Posted December 22, 2020 this is still an issue after the last patch. Nobody likes me because I'm unsafe. Link to comment Share on other sites More sharing options...
tech_op2000 Posted January 28, 2021 Share Posted January 28, 2021 (edited) Here is another trk file where the bit test had leading edge flap get stuck. Happens at the very end of the track. Landed. Shut Down. Restart. BIT test. https://drive.google.com/file/d/1f2v0tkUu6RNEJRls--NTHmax5yvxRH-N/view?usp=sharing Edited January 28, 2021 by tech_op2000 Link to comment Share on other sites More sharing options...
macedk Posted April 15, 2021 Share Posted April 15, 2021 Still an issue here OS: Win10 home 64bit*MB: Asus Strix Z270F/ CPU: Intel I7 7700k /Ram:32gb_ddr4 GFX: Nvidia Asus 1080 8Gb Mon: Asus vg2448qe 24" Disk: SSD Stick: TM Warthog #1400/Saitek pro pedals/TIR5/TM MFDs [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
deibbun Posted April 18, 2021 Share Posted April 18, 2021 This is still an issue. If shutdown procedure is so important, why can't I find one that works. Manual doesn't have a shutdown procedure listed. All I want to do is practice a situation over and over and I can't because I have to reload mission every time. It is very annoying. Link to comment Share on other sites More sharing options...
TonnyArno Posted August 31, 2023 Share Posted August 31, 2023 The issue is still there. What made a fix for me - is shutting down left engine. Do the BIT test with only right engine turned on. After test finishes - turn on left engine. Looks like a bug. Link to comment Share on other sites More sharing options...
Recommended Posts