Jump to content

Recommended Posts

Posted

when you come up with a final desine on the rudder setup. Culd you send me some how to's. The rudder is all that I realy have to have to work with my curint dash.

Home built PC Win 10 Pro 64bit, MB ASUS Z170 WS, 6700K, EVGA 1080Ti Hybrid, 32GB DDR4 3200, Thermaltake 120x360 RAD, Custom built A-10C sim pit, TM WARTHOG HOTAS, Cougar MFD's, 3D printed UFC and Saitek rudders. HTC VIVE VR.

 

https://digitalcombatmercenaries.enjin.com/

  • Replies 1.2k
  • Created
  • Last Reply

Top Posters In This Topic

Posted
when you come up with a final desine on the rudder setup. Culd you send me some how to's. The rudder is all that I realy have to have to work with my curint dash.

 

 

I sur will my friend.. ! Just need to get my hands on a FFB Wheel that I can hack to get the mechanics from..

"But (504)Brewber said they were'nt friendly.. So I took'em out.!"

[sIGPIC][/sIGPIC]

 

Posted

Ka-50 Pitbuild Update - 12. november 2008 - Collective brake Hydraulics

 

The mechanic Collective Brake is discarded.! Although it workes fine, it just did'nt feel like the real thing should.. And I REALLY want it to feel solid and have constant resistance forces where it should... Not feel the notches on the webstrap as it glides over the rollers, and have a 2,5cm play up and down when ity should just STOP..!:cry:

 

So I did some thinking, and I looked at the hydraulic dampener I made for the pedals.. I got me two more of those (see picture1) that actually are door-dampeners made so your doors don't slam shut in the wind:

doordampenerbm4.jpg

They are about 10 Euro, so I got a couple to experiment with.

 

All I wanted was the cylinder and the piston, so I had to open it up and remove the return-spring inside of it.

 

So I cut arround the rear end of the cylinder:

diyoildampener4zh4.jpg

 

Pulled the rear end off:

diyoildampener3xt9.jpg

 

Used a Dremel to grind down the part of the thread that had been compressed by the manufacturer to prevent the buyer unscrew the piston completely from its axle..

diyoildampener9qn4.jpg

 

And out came the pieces:

diyoildampener8jv8.jpg

 

Now the return-spring we don't need

diyoildampener7nn2.jpg

so chuck that away (in some box or a drawer.. you'll most likely find a need for it):

diyoildampener6nd8.jpg

 

Now we need a means of getting the oil from inside the dampener and through a valve that control the Collective Brake. I opted for making this hole through the allready pre-drilled rear loolink like this:

diyoildampener11bn0.jpg

 

After drilling it should look something like this:

diyoildampener10pl0.jpg

 

Now cut the damn thing shorter if you want.. I did shorten it by 100mm:

ka50collectivestickdampap2.jpg

 

The I cut the front end of a Brass connection from wher ever (I cant remember) and simply RAMMED IT IN WITH A HAMMER..!:thumbup: Dam therapeutic job that for a frustrated Norwegian.. I really got in contact with the brutal old Viking side of me..! And it came out lokking like a you-know-what:

ka50collectivestickdampzj0.jpg

 

Now thread the open end and insert a 5mm set-screw with some thead-tape (like plumbers use):

ka50collectivestickdampqj9.jpg

ka50collectivestickdampkz9.jpg

 

And that will take care of that..!

 

PLEASE REMEMBER TO DRILL A HOLE SO THE OIL CAN ENTER TO THE BRASS TUBE..! (i didn't... and it sucked:doh:)

 

The System Completly Assembled

 

As you see from the pics the oil-level rises and falls in the resarvoir as the piston pressed.. Now imagine a valve between the oil-dampener and the resavoir closing the oilflow.. And there you have it..!

ka50collectivestickdampge3.jpgka50collectivestickdampzp5.jpg

"But (504)Brewber said they were'nt friendly.. So I took'em out.!"

[sIGPIC][/sIGPIC]

 

Posted

Part 2

 

It will sit on the Collective Mechanics approximately like this:

ka50collectivestickdampoh5.jpg

 

Only on the INSIDE stupid..:smilewink:

The Colective Stick will have a valve (not sure of the type valve though.. I'm thinking maybe NOT this one.. LoL)

ka50collectivestickdampxc7.jpg

 

Also the Collective Brake Handle got an upgrade so I got rid of the extra play in it..!

ka50collectivestickdampiq6.jpg

 

 

And all that is left is to assemble everything and fiddle with it till it works..!:helpsmilie:

"But (504)Brewber said they were'nt friendly.. So I took'em out.!"

[sIGPIC][/sIGPIC]

 

Posted
So your going to use FFB in the rudder pedals? Dude I want some of what your smoking :music_whistling::D

 

Peace out 'bro.. I totally will have the most excelent Force Feedback thingie workin' on my pedals.. (puff puff).. I just had to after The Oh So glorious Urze Mentor (..bowing in respect..) led me down the path of enlightment towards my destiny.. :lol:

 

Man... I can tell you !

That's excellent stuff!

I have also a whole bag of this herb at home....

:lol:

 

Shhhh.. Everyone.. He speaks now..

 

I tried smoking that stuff but all I want to do now is veg out............. yes good stuff gotta go.............munchies.....:wacko:

 

 

He He.. But seriously. After reading a Pdf dokument released by Bell Helicopters on theys 206 series and Force-Trim functions. And seing Urze's video with the Cougar/Force Feedback hybrid, and how good that worked I capitulated.. I am now a huge fan of DCS/BS with Force Feedback Joystick.. It completely changes the way you fly this whirly-bird (or rather the way you don't without it!).

 

As for the Pedals I am wayting for a Steeringwheel with FFB that has been ordered to Hack..!

 

My next post will be the incorparation of a Microsoft Sidewinder 2 Force Feedback Joystick Mechanics into the Front Pedestal and connecting it to my Home-brew Ka-50 Stick with the trigger mechanism that I most likely NEVER will be satisfied with..

 

But Today is also a day of joy because...

 

THE X/Y TABLE WITH NEW STEPPER MOTORS IS DONE..!

 

cncbenchtopmill64548054or4.jpg

 

cncbenchtopmill62545795vl4.jpg

 

cncbenchtopmill59542128xg1.jpg

 

cncbenchtopmill60543245ss7.jpg

 

cncbenchtopmill61544565id7.jpg

 

cncbenchtopmill63546850qa9.jpg

 

cncbenchtopmill65548966gg0.jpg

 

So tonight I'll be connecting all the electronics and Powersupply and sit there watching as it goes "Wrrrrrrrrrrr....":thumbup:

"But (504)Brewber said they were'nt friendly.. So I took'em out.!"

[sIGPIC][/sIGPIC]

 

Posted
quick question...what is the purpose of the stepp motor?

 

The Stepper motors controlled by a computer, and it drives the X, Y and Z axis on the mill. So that I can first make a CAD drawing of the Panels or Parts, And have the CnC Mill cut it out precisly like I want it to be (Things like the Panels with text backlighted. Or knobs, Gauges, and of course the trigger mechanism).

 

Very nice Trigger :thumbup:, but where did the stepper motor for the Z axis go to?, you had it before.

 

Oh it will be there my friend.. I just did'nt bother attaching the new stepper motor for these pics..

 

And it WORKS..! So now I'm of to get me some 5-8mm axle connectors.. Yahoo..! I can finally continue on the panels now..!:thumbup:

"But (504)Brewber said they were'nt friendly.. So I took'em out.!"

[sIGPIC][/sIGPIC]

 

Posted

Hey Alex..:smilewink:

 

Where have you been lately..? I saw the units you made for firing rockjets from your RC Heli.. REAL COOL..!:thumbup:

Got some questions about those... he he..

 

Here are some pictures on my Microsoft Sidewinder Force Feedback MOD for the Front Pedestal.. I'll be testing it tonight.. And making a more complete update for you all..

ka50forcefeedbackjoystihn8.jpg

 

ka50forcefeedbackjoystiou2.jpg

 

Now If I can just trick HPO into making a better Trigger Mechanism for me I'de be on my way.. LoL

"But (504)Brewber said they were'nt friendly.. So I took'em out.!"

[sIGPIC][/sIGPIC]

 

Posted
Hey Alex..:smilewink:

Where have you been lately..? I saw the units you made for firing rockjets from your RC Heli.. REAL COOL..!:thumbup:

Got some questions about those... he he..

 

Hey trigger, I wasn't satisfied with my salary in the company. So I took a private project from a customer in southern China, and I've been designing a thermalstat. It's a very intense task and almost consumed all my spare time.

 

The rocket heli, HOhoo....it was HILARIOUS! Like I said I had my friend dr. Kenney fire the shots. Dr. Kenney is the kind of doctor who doesn't heal people, lol. It turned out well though.

 

If you got any question regarding the multi-channel fire controller, I think it's better for us to discuss in that crazy neighbor thread.

Posted

MAN oh man! you have come along way since the start of this thread!!!

I gotta learn how to give "rep" to ppl cuz you defiantly earned some!

 

truly great stuff gooing on here. and i realize that I'm running behind so I'd better start cracking haven't I ;)

 

// Trekki

Posted

QUICK Update

 

The DIY hydrailics system works like a charm..! It really feels more like the real thing (or at least a Eurocopter Collective)..:thumbup:

 

ka50collectiveassembledcb0.jpg

 

ka50collectiveassembledvq4.jpg

 

ka50collectiveassemblednt5.jpg

 

View from top (behind the Left Wall)

ka50collectiveassembledeu3.jpg

 

..and through the slot from the front showing the lower piston and it's attachment point..

ka50collectiveassembledez3.jpg

 

ka50collectiveassembledua7.jpg

 

 

.. well no time for explaining.. I'm off to se my girlfriend now.. And she has precenence over Pitbuilding .... at least now..!:cry:

"But (504)Brewber said they were'nt friendly.. So I took'em out.!"

[sIGPIC][/sIGPIC]

 

Posted (edited)

.. well no time for explaining.. I'm off to se my girlfriend now.. And she has precenence over Pitbuilding .... at least now..!:cry:

 

Looking forward to your update.

BTW, a couple of days from now, are we gonna see you back with bruise all over?:megalol:

 

edit:

I sent a reply to your neighbor. Wonder what he thinks about the enhancement. Let's wait till you get back.

Edited by Alex_rcpilot
Posted

Dear TriggerHappy69,

i have sent you an email about the dimensions of your cockpit...

if it is ok with you can you please tell me its dimensions so i can cut wood and plexiglass?

thank you anyway

stelios

Posted
Looking VERY good, mate!

 

Thanx Mate..! I just got home 10 minutes ago, and I'm DYING to test the setup..:)

 

Looking forward to your update.

BTW, a couple of days from now, are we gonna see you back with bruise all over?:megalol:

 

edit:

I sent a reply to your neighbor. Wonder what he thinks about the enhancement. Let's wait till you get back.

 

LMAO..! Well.. I'm still alive... For now.. :megalol:!

 

I'll talk to him (read as:My Crazy Neigbor) tomorrow.. Can't wait to hear what you guys have cooked up while I was gone..

maybe we could continue our H-Bridge discussion tomorrow?

 

Dear TriggerHappy69,

i have sent you an email about the dimensions of your cockpit...

if it is ok with you can you please tell me its dimensions so i can cut wood and plexiglass?

thank you anyway

stelios

 

Steilos.. I am soo sorry about this..! It seems I have kept you and one more waiting for my drawings for a long time now..:cry:

 

I promise to send them out tonight..

 

Again.. I'm really sorry..! Whish I had a good reason other than me forgetting it all the time.. :huh:

"But (504)Brewber said they were'nt friendly.. So I took'em out.!"

[sIGPIC][/sIGPIC]

 

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...