pacastro Posted July 21, 2021 Posted July 21, 2021 Hi, just updated to 2.7.4.963 and guided weapons are not working. If I try to use laser guided rockets, or laser guided mavericks or IR guided maverick they aren't working for me now. Worked fine on previous version. When I select the weapon, they get selected, but the pylon selected display just goes off and you don't get displayed any of the options for the selected weapon... IR Mavs won't get the stby indicator of cooling down either. For laser Mavs, I can't get the laser search to start searching. 2
Aernov Posted July 21, 2021 Posted July 21, 2021 The issue seems to be caused by TPod video feed/HOTAS mode. IR Mavericks and other weapons work fine on their own and with DMT/LST, but, if TPod is in HOTAS mode (SSS down twice) or, maybe, just when TPod video is on the MPCD, all weapons (I have tried Mk.20, GBU-16, GBU-54, APKWS) aren't displaying attack symbology on HUD, stations aren't boxed on STRS (but weapon name stays boxed in the top MPCD border), and when you attempt to select ordnance, attack symbology and STRS selection briefly flashes and drops again, HUD shows only dashes indicating "no ordnance". 2
Galwran Posted July 21, 2021 Posted July 21, 2021 The procedure has been changed. I do not fully understand it yet
Aernov Posted July 21, 2021 Posted July 21, 2021 The procedure involves only LMAVs, but currently all weapons seems to be affected.
gnomechild Posted July 21, 2021 Posted July 21, 2021 Aernov is right. Here's a track of the issue. This happens even when following the updated procedures. The track file is me trying to use a L/E2 Maverick according to the new procedure. As you can see, the weapon is not able to be selected properly, let alone uncaged, when the TPOD video is active on any MFD. Weapons can be selected just fine when the TPOD video is off. Harrier Uncage Bug.trk
Shiroka Posted July 21, 2021 Posted July 21, 2021 Yeah, I've tried with APKWS, GBU12, GBU38, LMavs (E2). Bascially can't fire anything with the TPOD up. This is a track trying to use a GBU38 - won't let me select the station or set a fuze and no attack symbology. AV8B - GBU38trk.trk 2
kotor633 Posted July 21, 2021 Posted July 21, 2021 Okay, but did you pay attention to what is in the Word file? And also note today's changelog: Updated: AGM-65 restrictions and limitations. Improved: Sensor Select Switch (SSS) logic and keybinds. Note: SSS keybinds must be done again CHANGES TO AGM and TPOD AV-8B.docx ************************************** DCS World needs the Panavia Tornado! Really! **************************************
gnomechild Posted July 21, 2021 Posted July 21, 2021 1 minute ago, kotor633 said: Okay, but did you pay attention to what is in the Word file? And also note today's changelog: Updated: AGM-65 restrictions and limitations. Improved: Sensor Select Switch (SSS) logic and keybinds. Note: SSS keybinds must be done again CHANGES TO AGM and TPOD AV-8B.docx 20.95 kB · 0 downloads Yes. Did you? This change is concerned with the confliction of Maverick vs TPOD video display and the inability to self-lase the AGM-65E. I reproduced the error in my track file by following that procedure. The track posted by shiroka shows this bug affected weapons that are not part of those changes
Aernov Posted July 21, 2021 Posted July 21, 2021 There is a quick fix in Razbam discord. It will probably be posted on the forum soon. 1
kotor633 Posted July 21, 2021 Posted July 21, 2021 vor 45 Minuten schrieb gnomechild: Yes. Did you? This change is concerned with the confliction of Maverick vs TPOD video display and the inability to self-lase the AGM-65E. I reproduced the error in my track file by following that procedure. The track posted by shiroka shows this bug affected weapons that are not part of those changes No I did not. I deleted both modules from RB. Since, as things are currently going, I am simply not interested in their 'products' ... 1 ************************************** DCS World needs the Panavia Tornado! Really! **************************************
Recluse Posted July 22, 2021 Posted July 22, 2021 I didn't try until I installed the Hotfix file. All SEEMS to be working for me. Tried AGM-65E2, AGM-65F, GBU-12 and APKWS. As reported elsewhere, the TPOD ZOOM buttons appear to be reversed.
myHelljumper Posted July 22, 2021 Posted July 22, 2021 Hi guys, this issue look to be the one we fixed with this quick-fix : Could you install it and try again ? Thanks. Helljumper - M2000C Guru Helljumper's Youtube https://www.youtube.com/channel/UCK3rTjezLUxPbWHvJJ3W2fA
Recluse Posted July 22, 2021 Posted July 22, 2021 (edited) As mentioned above, with the Hotfix, all the guided weapons seem to be working fine, (FOR ME) but the ZOOM UP (IN) and DOWN (OUT) buttons on the TPOD page are still reversed. Not sure if there were changes to the Hotfix since I downloaded it from Discord. Edited July 22, 2021 by Recluse
myHelljumper Posted July 22, 2021 Posted July 22, 2021 No it's the same file, I'll report the zoom button inversion. Thanks Helljumper - M2000C Guru Helljumper's Youtube https://www.youtube.com/channel/UCK3rTjezLUxPbWHvJJ3W2fA
Sindar Posted July 22, 2021 Posted July 22, 2021 Installed a hotfix. Works in the mission editor. It does not work in online mode. P.S. You better not update this poor T P O D
Recluse Posted July 22, 2021 Posted July 22, 2021 (edited) Maybe the HOST/server didn't have the Hotfix? I wouldn't think that would affect anything on the client side. Haven't tried it in Multiplayer yet. Edited July 22, 2021 by Recluse
Mr_sukebe Posted July 23, 2021 Posted July 23, 2021 Couple of things to note chaps: - The hotfix needs to be put into the main DCS install, and NOT your saved games. Won't work in the saved games folder - The Mav Ls seem to need warmup even on a hot start. Confused me for a few mins until I realised 1 7800x3d, 5080, 64GB, PCIE5 SSD - Oculus Pro - Moza (AB9), Virpil (Alpha, CM3, CM1 and CM2), WW (TOP and CP), TM (MFDs, Pendular Rudder), Tek Creations (F18 panel), Total Controls (Apache MFD), Jetseat
myHelljumper Posted July 24, 2021 Posted July 24, 2021 Hi, This has been fixed in the last OB update. Moving to resolved, thanks for the report. Helljumper - M2000C Guru Helljumper's Youtube https://www.youtube.com/channel/UCK3rTjezLUxPbWHvJJ3W2fA
Recommended Posts