MAXsenna Posted February 23, 2024 Posted February 23, 2024 Thx mate! I suspect you are on the right track.I want to trim like you do, but I don't remember the name of the assigned function. I tried binding all trim and magnetic brakes I could find, but they do not trim like it used to before the patch. As in: I did not use the auto-hover, I just trimmed it into stability. It used to work like the AH-64 trim. (Position stick/pedals, click, and let go) -I'm looking to assign the "click" Press "t" for the pilot. That's the force trim button on the stick and you'll see it move. For the pilot that is.Sent from my SM-A536B using Tapatalk 1
Tomcatter87 Posted February 23, 2024 Posted February 23, 2024 That update really made me jump into the Gazelle after a long pause. It looks great and feels a lot better than the last time I flew it. Also thanks a lot for the background information about the nice new liveries! 1 Modules: F-14A/B | M-2000C | AJS-37 | Mi-24P | F/A-18C | A-10C II | F-16C | UH-1H | F-5E | Mi-8 | FC 3 | AV-8B | A-4E | Gazelle | Ka-50 | Yak-52 | CE2 Maps: Syria | Marianas | NTTR | Persian Gulf | Caucasus Setup: Virpil WarBRD Base & VFX | TM Warthog | Arozzi Velocita Stand | Monstertech Mount | MFG Crosswind | Cougar MFDs | VRInsight Panel | JetSeat 908 | TrackIR
Moxica Posted February 23, 2024 Posted February 23, 2024 (edited) 1 hour ago, MAXsenna said: Press "t" for the pilot. That's the force trim button on the stick and you'll see it move. For the pilot that is. Sent from my SM-A536B using Tapatalk THX! It is "Trimmer" And whaddyaknow! It was still assigned to the "look up slow" after I assigned to "Trimmer" I deleted that, and voila! -Now I can start loving her again! Edited February 23, 2024 by Moxica 1 ASUS ROG Strix B550-E GAMING - PNY GeForce RTX 4090 Gaming VERTO EPIC-X - AMD Ryzen 9 5900X - 64Gb RAM - 2x2Tb M2 - Win11 - Pimax crystal light - HP Reverb g2 - Oculus Quest 2 - Thrustmaster Warthog HOTAS - Thrustmaster Pendular Rudder - 2X Thrustmaster MFD Cougar - Audient EVO8
MAXsenna Posted February 23, 2024 Posted February 23, 2024 THX! It is "Trimmer" And whaddyaknow! It was still assigned to the "look up slow" after I assigned to "Trimmer" I deleted that, and voila! -Now I can start loving her again! Awesome! Sent from my SM-A536B using Tapatalk 1
GrEaSeLiTeNiN Posted February 23, 2024 Posted February 23, 2024 Hotas rebinding in progress but am a bit confused. They separated out the Pilot and Copilot bindings but many of the pilot bindings work when you are copilot eg. trim, autopilot functions, kneeboard, etc, meaning you don't need to map them in Copilot (just map them in Pilot) and they'll still work when you are Copilot. AMD Ryzen 5 5600X | Gigabyte RTX 3070 Gaming OC 8GB | 64GB G.SKILL TRIDENT Z4 neo DDR4 3600Mhz | Asus B550 TUF Plus Gaming | 2TB Aorus Gen4 TM Warthog HOTAS | TrackIR 5 | Windows 10 Home x64 | My HOTAS Profiles
MAXsenna Posted February 23, 2024 Posted February 23, 2024 Hotas rebinding in progress but am a bit confused. They separated out the Pilot and Copilot bindings but many of the pilot bindings work when you are copilot eg. trim, autopilot functions, kneeboard, etc, meaning you don't need to map them in Copilot (just map them in Pilot) and they'll still work when you are Copilot. Read the changelog. This is the way it's supposed to be in SP, and in MP of you're alone in aircraft. If you're two in the aircraft in MP, the controls in whatever seat you're in take precedence.Cheers! Sent from my SM-A536B using Tapatalk
GrEaSeLiTeNiN Posted February 23, 2024 Posted February 23, 2024 30 minutes ago, MAXsenna said: Read the changelog. This is the way it's supposed to be in SP, and in MP of you're alone in aircraft. If you're two in the aircraft in MP, the controls in whatever seat you're in take precedence. Cheers! Sent from my SM-A536B using Tapatalk I see thanks! 1 AMD Ryzen 5 5600X | Gigabyte RTX 3070 Gaming OC 8GB | 64GB G.SKILL TRIDENT Z4 neo DDR4 3600Mhz | Asus B550 TUF Plus Gaming | 2TB Aorus Gen4 TM Warthog HOTAS | TrackIR 5 | Windows 10 Home x64 | My HOTAS Profiles
hannibal Posted February 23, 2024 Posted February 23, 2024 amazing update to a fantastic airframe. keep doing what you are doing, money is ready to purchase kiowa warrior! 1 find me on steam! username: Hannibal_A101A http://steamcommunity.com/profiles/76561197969447179
grim_reaper68 Posted February 23, 2024 Posted February 23, 2024 For the keybidding, don't forget to save them. I just reloaded mine on the pilot and copilot, and all where back. My TM warthog profile works again. Effectively there was a surprise as I jumped on the copilot seat with the flight controls. Just added the same curves as the pilot and it was OK. Great work on all the new french liveries. 1
kotor633 Posted February 23, 2024 Posted February 23, 2024 Brilliant update for the Gazelle. Yes, you just have to reassign the keys again... there could be worse things. The module is so fun! Good work, Polychop. 1 ************************************** DCS World needs the Panavia Tornado! Really! **************************************
some1 Posted February 25, 2024 Posted February 25, 2024 (edited) For the keys assignments, most (maybe all) of them will work if you load the old profiles, it's just they are located now in "SA342 Pilot" folder where they used to be in "SA342". Click the "Load Profile" in DCS, point to the old diff file in "SA342", and it should work. Edited February 25, 2024 by some1 1 Hardware: VPForce Rhino, FSSB R3 Ultra, Virpil WarBRD, Hotas Warthog, Winwing F15EX, Slaw Rudder, GVL224 Trio Throttle, Thrustmaster MFDs, Saitek Trim wheel, Trackir 5, Quest Pro
grim_reaper68 Posted February 25, 2024 Posted February 25, 2024 You can do the same on the copilot profile they keys are the same 1
Gunfreak Posted February 25, 2024 Posted February 25, 2024 I can't get my gazelle to work at all now. My collective is always revesed no matter how many times I flip the axis in the settings, up is always down and down is always up, I've deleted all co pilot axis so not to interfere. And my force trim don'st work, I've tried to reverse both axis, I've tried to reverse just X or just Y, but the force trim dosn't work the stick always move to a diffrent place than it is supposed to with my brunner FFB stick i7 13700k @5.2ghz, GTX 3090, 64Gig ram 4800mhz DDR5, M2 drive.
A.F. Posted February 25, 2024 Posted February 25, 2024 vor 6 Minuten schrieb Gunfreak: I can't get my gazelle to work at all now. My collective is always revesed no matter how many times I flip the axis in the settings, up is always down and down is always up, I've deleted all co pilot axis so not to interfere. And my force trim don'st work, I've tried to reverse both axis, I've tried to reverse just X or just Y, but the force trim dosn't work the stick always move to a diffrent place than it is supposed to with my brunner FFB stick After you have clicked on the axis setting, check that the correct axis is selected in the following window. You can select the axis via a drop-down menu 1
MAXsenna Posted February 27, 2024 Posted February 27, 2024 For the keys assignments, most (maybe all) of them will work if you load the old profiles, it's just they are located now in "SA342 Pilot" folder where they used to be in "SA342". Click the "Load Profile" in DCS, point to the old diff file in "SA342", and it should work.Excellent! Thank you! Sent from my SM-A536B using Tapatalk
SturmVogel Posted February 28, 2024 Posted February 28, 2024 Good time for all! Last update broke Mistral IR seeker. There is no more tracking of ground units. Its stil has lock on tone, but after launch rocket goes straight in all kind of conditions... Best wishes. 1
Thamiel Posted February 29, 2024 Posted February 29, 2024 On 2/25/2024 at 2:34 PM, Gunfreak said: I can't get my gazelle to work at all now. My collective is always revesed no matter how many times I flip the axis in the settings, up is always down and down is always up, I've deleted all co pilot axis so not to interfere. And my force trim don'st work, I've tried to reverse both axis, I've tried to reverse just X or just Y, but the force trim dosn't work the stick always move to a diffrent place than it is supposed to with my brunner FFB stick Experienced similar mixed axis settings after redefining my key bindings. My Warthog Trottle, normally bound to the collective, gives double input (Z and RZ). Separately defined, the now undefined RZ axis of the Throttle starts working on the pedals, superseding my TFRP pedal setting. Modules: A-10CII | F-5E | AV-8B | M-2000C | SA342| Ka-50-III | Fw 190D-9 | Mi-24P | F-4E | F-14B | F-86F | AH-64D | F-16C | UH-1H | A-4E-C | AJS-37 | P-47D | P-51D | Bf 109K-4 | CA | SC Maps: Nevada | Syria | Persian Gulf | South Atlantic | Kola | Sinai | Normandy | Channel Setup: Ryzen9 5950X | 64GB DDR4 | RTX 4090 | 2TB M.2 NVMe | TM Warthog & TFRP Rudder | Reverb G2 | OpenXR/TK | Win10 Affiliation: [TM]Tigermercs
MAXsenna Posted February 29, 2024 Posted February 29, 2024 Experienced similar mixed axis settings after redefining my key bindings. My Warthog Trottle, normally bound to the collective, gives double input (Z and RZ). Separately defined, the now undefined RZ axis of the Throttle starts working on the pedals, superseding my TFRP pedal setting.Have you tried to unbind all axis for the copilot? Sent from my SM-A536B using Tapatalk
Thamiel Posted February 29, 2024 Posted February 29, 2024 1 hour ago, MAXsenna said: Have you tried to unbind all axis for the copilot? Sent from my SM-A536B using Tapatalk Yeah, did that. There are still waco inputs from somewhere. Its not always reproducible either. 1 Modules: A-10CII | F-5E | AV-8B | M-2000C | SA342| Ka-50-III | Fw 190D-9 | Mi-24P | F-4E | F-14B | F-86F | AH-64D | F-16C | UH-1H | A-4E-C | AJS-37 | P-47D | P-51D | Bf 109K-4 | CA | SC Maps: Nevada | Syria | Persian Gulf | South Atlantic | Kola | Sinai | Normandy | Channel Setup: Ryzen9 5950X | 64GB DDR4 | RTX 4090 | 2TB M.2 NVMe | TM Warthog & TFRP Rudder | Reverb G2 | OpenXR/TK | Win10 Affiliation: [TM]Tigermercs
grim_reaper68 Posted February 29, 2024 Posted February 29, 2024 A several flight tests pointed that the new FM is way better than the older. I now manage to make a rapid stop and hover landing. Great job guys. 1
stoop Posted February 29, 2024 Posted February 29, 2024 On 2/22/2024 at 9:23 PM, slaintemaith said: I bloody uninstalled and reinstalled because this issue was maddening and it never occurred to me to map the controls to be the same. Someone found your post and cited it on the ED Discord and spared me my sanity, because *things were working just fine on the Huey and every other aircraft I have set up!* This might need to be stickied--I can't imagine we're the only two people to encounter this. This might be my issue. Since the update my flying has been all over the place, can't get the Gazelle off the ground without it spinning and rolling. I think I'll need to to remove all the copilot controls and just get to grips with the pilot controls then gradually add the CPG controls back. I used to be pretty good in the Gazelle but this is a real setback not gonna lie.
MAXsenna Posted February 29, 2024 Posted February 29, 2024 1 hour ago, stoop said: This might be my issue. Since the update my flying has been all over the place, can't get the Gazelle off the ground without it spinning and rolling. I think I'll need to to remove all the copilot controls and just get to grips with the pilot controls then gradually add the CPG controls back. I used to be pretty good in the Gazelle but this is a real setback not gonna lie. Oh! You'll get back into it right away as soon as you remove all the copilot's controls! 1
grim_reaper68 Posted March 1, 2024 Posted March 1, 2024 (edited) reassign your axis. The update reset them all, so you might have ptich, roll an yaw controls assigned to some axis you don't want. I had pitch and roll on the stick and the rudder pedals ( brakes), and the yaw on the pedals and the second throttle axis... Edited March 1, 2024 by grim_reaper68 1
Recommended Posts