Jump to content

corsair engine seizing after a few minutes of flying no matter what settings I use.


Recommended Posts

Posted

Like the title says.  I have the mixture set halfway, reduce throttle to 40 and bring back the rpms to 24.  I am also leaving the cowl flaps open to avoid overheating.  All gauges look good when she seizes and I'm on the main tanks.  The aircraft is spawning on the carrier in a mission with engines running so it can't be a start-up procedure issue.  I've been simming forever and was a real-world pilot.  I'm at my wits end with this thing as I can't think of another option to try.

LouP

Posted
49 minutes ago, LouP73 said:

Like the title says.  I have the mixture set halfway, reduce throttle to 40 and bring back the rpms to 24.  I am also leaving the cowl flaps open to avoid overheating.  All gauges look good when she seizes and I'm on the main tanks.  The aircraft is spawning on the carrier in a mission with engines running so it can't be a start-up procedure issue.  I've been simming forever and was a real-world pilot.  I'm at my wits end with this thing as I can't think of another option to try.

LouP

Post a track file and someone will help.  I enjoy a little investigation myself 🙂

  • Like 1

My DCS Missions: Band of Buds series | The End of the T-55 Era | Normandy PvP | Host of the Formation Flight Challenge server

 

Supercarrier Reference Kneeboards

 

IRL: Private Pilot, UAS Test Pilot, Aircraft Designer, and... eh hem... DCS Enthusiast

Posted

Just to add, weird thing is I flew the mission once with no issues and this problem cropped up once I tried to add some ordinance.  I was still under gross weight so it shouldn't have been an issue.  Is there any way to retrieve the track if I already shut DCS down?  If not, I need to go re-fly the mission tomorrow.

Thanks, LouP

Posted
4 minutes ago, LouP73 said:

Just to add, weird thing is I flew the mission once with no issues and this problem cropped up once I tried to add some ordinance.  I was still under gross weight so it shouldn't have been an issue.  Is there any way to retrieve the track if I already shut DCS down?  If not, I need to go re-fly the mission tomorrow.

Thanks, LouP

You can check your saved games/tracks folder to see if it auto saved.  Otherwise, you’ll have to re-fly it.  
 

Also, there are already a few threads with this same topic.  You just created another one.  One of them has been open for a while and has lots of discussion.  I’m betting your issue is something already experienced, discussed, and resolved.  Have a look in the other threads as well.  
 

You didn’t mention opening your oil flaps, so you may have cooked the engine.  That’s all I can offer at the moment based on the info you gave above.

 

My DCS Missions: Band of Buds series | The End of the T-55 Era | Normandy PvP | Host of the Formation Flight Challenge server

 

Supercarrier Reference Kneeboards

 

IRL: Private Pilot, UAS Test Pilot, Aircraft Designer, and... eh hem... DCS Enthusiast

Posted

OK, I think I figured it out.  I opened the intercooler and oil cooler before take-off, and all went well (as far as the seizing issue).  As I said right when the engine seized previously, I hit the escape key to freeze the action and all temps looked OK on the instruments.  It's as if the position of the various cooling flaps is determining when the engine should fail instead of the temperatures as shown on the gauges.  I know this may seem like the same thing but when you are watching your gauges to determine when to open the flaps, it can mess you up as you will think all is well and not open the flaps yet.  But I am confused if this is true as to why it didn't just seize on the carrier deck.  Something seems not quite right.

Thank you all, LouP

Posted
27 minutes ago, LouP73 said:

OK, I think I figured it out.  I opened the intercooler and oil cooler before take-off, and all went well (as far as the seizing issue).  As I said right when the engine seized previously, I hit the escape key to freeze the action and all temps looked OK on the instruments.  It's as if the position of the various cooling flaps is determining when the engine should fail instead of the temperatures as shown on the gauges.  I know this may seem like the same thing but when you are watching your gauges to determine when to open the flaps, it can mess you up as you will think all is well and not open the flaps yet.  But I am confused if this is true as to why it didn't just seize on the carrier deck.  Something seems not quite right.

Thank you all, LouP

Need a track file. You likely did damage to the engine beforehand and the engine driven fuel pump failed, if your temps were in fact okay.  Did you hear engine knocking sound when you pushed the throttle up?  Come back with a track file next time and I’ll gladly take a look for you. 
 


FYI, your intercooler flaps do nothing except add drag during takeoff.  You need them to cool the carb air only when the blower is running.  Without the blower, you aren’t generating heat in this area.  You can leave them closed.

 

  • Like 2

My DCS Missions: Band of Buds series | The End of the T-55 Era | Normandy PvP | Host of the Formation Flight Challenge server

 

Supercarrier Reference Kneeboards

 

IRL: Private Pilot, UAS Test Pilot, Aircraft Designer, and... eh hem... DCS Enthusiast

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   1 member

×
×
  • Create New...