cannot repoduce and missing track file Aileron Position after C&D

[NoPro]

I‘m not sure and I would guess that I’m the problem here but after a cold and dark start up, doesn’t matter if its a self made mission or the first training mission, I can’t get this thing to fly straight. NO FFB JOYSTICK IS USED.
 

 AFCS bit Test is successful and I trim everything back to neutral. Soon after liftoff the aircraft banks to the left, so I put in some right trim, even though it shouldn’t bank as there is no wind, no loadout, nothing. After minimal right trim input, the aircraft banks to the right and so it continues the whole flight, left, right, left, right. Pitch trim is fine and I do get a perfect level flight but aileron. When using a hot start mission or the second training mission, all works well and no issues as I don’t have to touch the aileron trim. Unfortunately the controls indicator is not working at the moment, so I can’t check the trim positions as I think the „trim neutral lamps“ do have a bigger range and are not exactly neutral when lit. Any ideas how I can get this thing to fly straight after a C&D start up? Anyone experienced the same? 
 

cheers
 

 

[RogueRunner]

I do find the trim increments is a little coarse yes, difficult to get it perfect while flying at a constant speed and attitude. 

[Flia]

It would be great if we could adjust the trim sensitivity in DCS.

[NoPro]

1 hour ago, Flia said:

It would be great if we could adjust the trim sensitivity in DCS.

You can, I adjusted mine in the config file from 1.0/-1.0 to 0.4/-0.4. It‘s the same procedure as with the F4 Phantom. But still struggling to get it lined up perfectly except if you press the Trim reset button, but this also cancels your pitch trim 

[RogueRunner]

6 minutes ago, NoPro said:

You can, I adjusted mine in the config file from 1.0/-1.0 to 0.4/-0.4. It‘s the same procedure as with the F4 Phantom. But still struggling to get it lined up perfectly except if you press the Trim reset button, but this also cancels your pitch trim 

although not ideal a stopgap maybe, which file?

[NoPro]

12 hours ago, RogueRunner said:

although not ideal a stopgap maybe, which file?

Your DCS Open Beta folder —> Mods —> Mig29 Fulcrum —> INPUT —> Keyboard—> default.lua and then search for „trim“. If you need further assistance, just let me know

Edited Friday at 09:54 PM by NoPro

[Flia]

12 hours ago, NoPro said:

Your DCS Open Beta folder —> Mods —> Mig29 Fulcrum —> INPUT —> Keyboard—> default.lua and then search for „trim“. If you need further assistance, just let me know

Thank you very much for this tip 

[NoPro]

Don't know how much a track file would help without seeing the controls indicator but here you go ED @BIGNEWY, instant action takeoff mission on the caucasus map. I did tap my aileron trim so that it is out of 'neutral' and then back so that the 'neutral lamp' is illuminated and after liftoff I didn't touched my x-axis on the stick and the aircraft is banking to the left even though everything should  be neutral. If you need something more, just let me know.

 

cheers

Aileron Trim.trk

[markymarc8311]

I had a similarish problem and "trimer - reset" fixed me up. Hope it works for you dude