All Activity

OpenXR takes care of itself. No additional settings required. Leave pixel density at 1.0 in the DCS settings. You should have excellent results with everything at 100%. The Crystal Light is plenty sharp. Less is more, that's my VR motto, so don't add things unless you feel you need them.

Scusa se devio verso un mero discorso economico, ma un modulo per essere realizzato ad un certo livello, livello imposto dalla ED dovrebbe, in prospettiva, permettere un ritorno sull'investimento iniziale, aggiungerei anche in tempi ragionevoli. Secondo voi IFE, ha avuto un ritorno economico valido dall'implementazione dell'MB-339 in DCS (non parlo di FS2020/24)? Chiedo.

Thanks for the tip. I'll try it out.

Here you have it attached. thanks. Yes, look quite similar. Definitely the bios update made this issue to pop up for sure because a few minutes before performing it, I was running dcs just perfect (thanks to the unpark fix) and inmediately after the update the issue appeared. The problem with this, is that going back to previous bios would be a pain in the a*s, since then secure boot and other problems with log-ins, keys, windows activation, etc. may accour, so Im not willing to do that personally. I think that, even if the bios update has something to do with this, ed should do something about it, since other apps are working fine so hope there is something in the works or in the todays patch that solves this. EDIT:Forgot to mention that also updated intel ME, and other chipset stuff and general drivers after updating bios, at least as far as I know they exist. dcs.log

I have tried with and without Eye Tracking setting in DCS, same result : no DCS image in PCL, only the PimaxPlay "Cosmos" background. However, it seems I have a foveated rendering without selecting Use QuadViews in DCS, if I set Quadviews Setting (and Central Priority Rendering ?) in PimaxPlay. Thanks. In oder to do that, which parameters do I set in PimaxPlay, and in DCS ?

OpenXR should manage this for you. If you can't achieve 90, it should set your FPS to 45. It doesn't hurt to set it to 45, but I like to let OpenXR manage this. I would let DCS do all of the image quality settings. So set the headset to 100%. With a 3090 you shouldn't need quadviews at all. Some feel the need for higher FPS, but I personally can see the screen artifacts from quadviews, so I leave it off. If openxr gives you 45fps, and you are not stable, you can enable quadviews in DCS.

Is there a thread related to all the bushes and shrubs etc that are affected by pop in on all maps? Can this be done with a mod manager like ovgme?

Hi, i use it only in SP with my created missions.

When you activate QuadViews in DCS, do you also activate Eye tracking? (If you do, don't)

If so, this video contains the explanation of what happened:

afaik, this mod is completely independent from the UH-60L, so you should be fine.

Yes, ED hinted at the functionality coming to their other modules too, so hopefully we will get working visors for all ED modules on MiG-29's launch day! Yeah for ED modules I put gamma at 1.6 (during daytime missions) to put the colours and brightness of the outside world while looking outside in the cockpit, at the same level than external view is when gamma is at 2.2. DCS lighting is weird... With working visors such shenanigans will no longer be needed.

Hi all, I just bought a brand new Pimax Crystal Light to replace my HP Reverb G2, and I am a bit struggling with the settings, between PimaxPlay, OpenXR in game settings, DCS, ... So I have a few questions below, thanks for your help ! My PC : Windows 11, Intel i9-10900K, 32 Gb RAM, nVidia RTX 3090 Frequency / FPS PimaxPlay : 90 Hz Refresh Rate, half-framerate set to OFF DCS : Max FPS set to 45 Question : is it the right wait to do, or better to set Half-framerate to ON in PimaxPlay and Max FPS to 90 in DCS ? Upscaling / Quality PimaxPlay : Image Quality : 0.75 (Medium) GPU Upscaling : None (I guess that 0.75 Image Quality is already upscaling ???) Sharpness : 0.4 DCS : Pixel Density : 1.0 Foveated View : I am trying to use QuadViews : PimaxPlay : Quadviews settings : Balanced Pimax Central Priority Rendering : Balanced DCS : Use QuadViews : OFF Eye Tracking : OFF Question : if I try to set Use Quadviews : ON in DCS, I have no image in the helmet (only the single image copy on main monitor) Am I setting this correctly ? Thanks for your help on my questions, and if you have any advice about my overall set-up of parameters, feel free to reply Chris

Hello, Thank you for all the replies. I had a different HOTAS back in 2014 when I first scraped the surface of the sim, it was a lot different back then, to be honest, I did not have the patience, and the attention to detail I have now, and even if my HOTAS had not broken down, I would have still quit trying, as my first module was A-10C, and even though it is considered to be a "beginner friendly" full fidelity module, I was basically banging my head against a brick wall, when I should have read a manual. Now, with the FC2024 it's a whole lot more easier to get a hang of things, and VR just makes the whole experience so much more immersive, than having three screens and TrackIR. As Raven said, I'll be re-learning take off's, landings and basic manouvers, before even thinking about any of the advanced stuff. Thank you so much for all the tips, I actually found a pack of pre-made profiles for the Flaming Cliffs 3 aircraft's, so that helps a lot (in case anyone else is/was in my situation, here' a link to a pre-made pack of profiles for the Logitech X56 and Flaming Cliffs 3: https://steamcommunity.com/linkfilter/?u=https%3A%2F%2Fdrive.google.com%2Fdrive%2Fmobile%2Ffolders%2F1g7op9YxNbWi8fogam0tK0yer1rRCLe7A%3Fusp%3Ddrive_open ). I still have to memorize all the button configs, so that will take a while, haha. Thank you all again for helping me out, I truly appreciate the help! One step at a time. Happy flying!

I'd like to ask how exactly you guys are using it. Single player, multiplayer? Is anyone using the SRS-STTS features (e.g. having the sounds play from dedicated server)?

Yeah. With a high value FOV, any hour near noon is quite harsh on the eyes inside the Apache to the point that any mission that features a midday or close mission start time becomes unattractive. Gamma on my end is at 2.0 (-0.2 from default). Black levels are low on my monitor for taste and there is no washed out colors look on my image (calibrated monitor for work). Still is pretty harsh on the eyes.

Aaaah, there she is! Is not the Interface menu but is 'Avionics Language' drop down menu.

nope, never did and I recommend no one to do that, because... aviation things. There is no need to be anything in ye ole deutsche sprache. Beside your english is not the yellow from the egg and you use the tutorials a lot. So, thats not the reason for having german Bettyin Mig-29G(!)

Looks awesomo - are we stil OK to use the SH-70B Seahawk Folded mod?

by the use of umlaut letter I presume that your entire interface is in German so... Tschüss

Those Iskras will come in handy too, specially If they add the proper weapons to it.

BUMP. Added some Youtube videos in the OP Early next week two Standard Editions will become available.

Hi Calvin, done that yesterday... Best regards.

Mig-29G from FC3 has German Betty, tried yesterday. Achtung Höhe, Treibstoff 1500, Maximale Geschwindigkeit. oderso If there was any settings to change, I do not rember, if so, I did decades before.

One ide I have from you point out the situation is that the flight enters big enough trigger area where if - whole group enters the area is continues as part of the coalition else only part of the group enters - is a fail/deviation. I bet we are the same generation where not once played a single player campaign due to the lack of MMORPG and Multiplayer at all so there was many missions where you must take a position or jump off an area in order to proceed with the mission, otherwise is a failure.