All Activity

Can you tune the radio to a frequency they're not on?

Nah, no active FFB devices at all on my side. I've got racing wheel plugged in, but it's powered off by default and thus shouldn't interfere. Now that I think about it, don't remember if I've got FFB ticked in special options, though. Shouldn't have, 'cause I always un-select it but will double check if it got reset after recent update.

Do we have to do something with the fuze ?

Attach your Saved Games\DCS\Logs\dcs.log file (will just be a text document named "dcs" if your Windows is hiding file extensions). Was the previous card also an AMD? Recommend you use DDU to remove the drivers and reinstall fresh stable ones as well just in case.

они белые

Years ago I was wondering about the same at first, but later when I thought about it - if aft tank is supposed to provide extra long range fuel supply in that configuration for all flight including cruise, it wouldn't make any sense if it worked only at emergency power, would it? I didn't investigate the ins and outs of the system deeper, though, 'cause I usually don't use aft tank for fuel anyway.

Our czsk skin

Yes, track replay is indeed broken so no use of them ATM, however you can see in screenshot where I was shooting at, the cannon aim and where the tracers went... the cannon computation is completely off for the MiG-29 right now. I can't use aiming and firing at non-manoeuvring target as judgement for accuracy (not that on its own) and even then I find that aim is off a bit and cannon rounds overshoot over the target so I have to aim at the bottom of the target in order to get hits. The cannon should be accurate and not this bad (for example look at accuracy of aiming piper in the F-15C... that thing is like a sniper, compared to it MiG-29 is like shotting with a bow and arrow.

I like it how it is in VR. Allows me best especially in the backseat to command George CPG. just my personal opinion

I still think you didn't notice (for me 100% is present) but if possible, please repeat it and send me the track (or the other situation when it didn't happen, I'd be happy to confirm that this is not 100% the case ps. and I hope it's a production version, not a beta ;)). This may provide further detail on when and how the problem occurs.

I have done some cold spawns on Caucus and Syria. With Switch in WYPT (I align on Ramp coordinates in WYPT 1) and Nav/RSBN channel preset to a specific freq. Cold start and I taxy no stutter and both AD/WYPT switch remains in WYPT and manual Nav/RSBN channel remains as preselected.

После 90 секунд тоже можно. Но в РЛЭ написано "Включение позже 90 секунд и раньше 5 минут - не желательна, так как точность выставки ухудшается". Но по мнению эксплуатантов там итак погрешности больше чем "В книжке написано". И полная навигация от ускоренной в этом случае не сильно отличается, по этому нет смысла тратить ещё 7-8 минут)

Good to know, I will check the it, thx! Btw. Are you talking about the frequency programmed under the Beacon buttons or in the ARK receiver and channel 1, for example?

Update: Decided to double back and make some "eyeball" location comparisons, starting with the 'OEM x_trans = 0.120000'. And it was still slightly small, but only slightly, like your head is against the headrest, and fine generally if preferred. What surprised me was that moving forward a measly '0.005', to 'x_trans = 0.125000', made a big difference, without making the gunsight glass and windscreen overly large, like the previous setting. The gauges "pop", as does the canopy bow, so it feels like being inside. And the MIL Ring size is not affected by "eyeball" position, only zoom(FOV), so the further away, the bigger it is relative to the reduced reflector glass, which is affected. Went back-n-forth between the two, alternating a quickstart 6 v. 6 mission, including combat landing afterward. Both work very well, but the 'x_trans = 0.125000' just feels better. SnapViews["P-51D"] = { [1] = {-- player slot 1 [1] = {--LWin + Num0 : Snap View 0 viewAngle = 54.750000,--FOV Cockpit Zoom 54.750000, OEM 80.000000 "P-51D" viewAngleVertical= 0.000000,--VFOV hAngle = 0.000000,-- (Snap View)/(Cockpit panel view in)(-30°) vAngle = -30.00000,-- Cockpit View Angle -30.00000, OEM -9.500000 x_trans = 0.125000,-- Cockpit View In_Trans 0.125000, OEM 0.120000 y_trans = 0.060000,-- Cockpit View Up_Trans 0.060000, OEM 0.059000 z_trans = 0.000000,-- Cockpit View Rt_Trans 0.000000, OEM 0.000000 rollAngle = 0.000000, cockpit_version = 0, [13] = {--default view viewAngle = 40.000000,--FOV Cockpit Zoom 40.000000, OEM 80.000000 "P-51D" viewAngleVertical= 0.000000,--VFOV hAngle = 0.000000,-- (View Center)/(Cam View Dn-Slow)(-30°) vAngle = 0.000000,-- Cockpit View Angle 0.00000, OEM -9.500000 x_trans = 0.125000,-- Cockpit View In_Trans 0.125000, OEM 0.120000 y_trans = 0.060000,-- Cockpit View Up_Trans 0.060000, OEM 0.059000 z_trans = 0.000000,-- Cockpit View Rt_Trans 0.000000, OEM 0.000000 rollAngle = 0.000000, cockpit_version = 0, Enjoy. Bowie

Sorry to keep bugging you guys, but now I have a weather issue. I'm only getting completely clear skies or rain it seems. For instance, the METAR says: METAR Mozdok 050630 33003MPS NSW BKN076 BKN216 FEW336 08/M11 510002 QNH749 BLU= But it's clear skies...and if you look at the MIZ in the editor, there's no weather preset loaded. Did I break something again? I'm creating a custom Campaign using the new MiG-29 (I added all the necessary stuff, so that part works fine). I've set the Weather to have more of a chance for a low pressure system. So I get either Rain...or completely clear skies.

Even more so, they have already done some work, for example for the Su-25 FF ;). However, the navigation system also had another purpose - not to give the pilot much freedom in this respect, it could always be an obstacle, for example in the case of a desire to escape .

Hi. No, Im sure, it exists all the time, 100% from cold and dark and on every map. I only take off from the ground and from C&D and I get this every time, I can even hear the buttons clicking in the cockpit. Maybe you didnt notice it but its not random case for me. I pay special attention to this, the rest of this momentary freeze is also noticeable, VR is more sensitive to any FPS drop, so it is very visible.

I'd like to see the NASA livery. Apparently, some kind of special radar is installed on such an aircraft.

Started flying the Apache again In VR, the George menu, when activated, is slaved to my headset. It moves when my head moves. I seem to recall in the past, the menu would be locked on the bottom right of my display. Is there any way to adjust this in VR?? Thanks in advance. HP Reverb G2/Windows 10 -Wraith

Bei der standalone muss man sich ja zwingend bei ED anmelden, wenn man über den Shop Module kaufen will. Bei Steam braucht man das ja nicht, deswegen hab ichs nie gemacht.

Interesting this does not always happen. I have seen it a number of times but its random imo.

I'm not seeing any accuracy problems - I just ran a quick test against a Mig-23 as a formal experiment and the only inaccuracy was from me. Pretty much ALL my seat time in the Mig has been 1v1 gunzo fights and I haven't noticed anything amiss. However .TRKs are broken. Here's Kuky's track... Makes no sense at all - after the merge he's shooting at thin air. So I recorded my own track from the Mig-23 test and had exactly the same issue; about halfway through the weirdness starts. Conclusion 1) Gun accuracy (for me) is fine. 2) TRKs are broken. busted.trk

Искал как увеличить яркость MFD WinWing и нашел ролик. В ролике рассказывают как решить вопрос с помощью ReShade. Скачал с официального сайта файл ReShade_Setup_6.6.0_Addon, положил его в папку ...DCS World\bin-mt, запустил его указал дайрект 10,11,12 после чего закрыл. Сделал как указано в видео файл сделал файл UIMask и поместил в папку ...DCS World\bin-mt\reshade-shaders\Textures. После чего запустил DCS. ReShade запустился и пошли вопросы: 1. В меню программы очень крупный шрифт и отсутствует бегунок прокрутки плагинов. Поэтому, кто знает, подскажите пожалуйста как включить "бегунок" как в виндовс. 2. Включил плагины, которые указаны на видео, посредством ввода названий этих плагинов в строке поиска. На видео видны бегунки, посредством которых можно менять яркость и т. д., однако у меня меню с этими бегунками не появляется. Подскажите пожалуйста, как эти бегунки включить. 3. После запуска DCS с ReShade он стал блеклым, хотя у автора видео ничего такого не происходит. Подскажите пожалуйста как следать так, чтобы цветовая палитра DCS не менялась. 4. На видео автор перетаскивает плагины вверх/вниз качество картинки меняется, потом он их ставит обратно. Не могу понять для чего он это делает, возможно для того, чтобы показать где именно среди плагинов должны находиться те, которые нужны, если кто-нибудь знает подскажите пожалуйста цель его действий и на самом деле так важен порядок расположения плагинов? 5.Выход из DCS при включенном reshade происходит с ошибкой. "лог" прилагаю.dcs.log-20251004-031753.zip

Thank you for this clarification. Well done for your work, it keeps the passion alive.