vctpil

Thanks for the explanations. That's why is called 'command steering'.

Hi, When I select and activate a TACAN (TCN boxed on HSI), the command steering appears on HUD. But when I select a course (with the CRS switch), the command steering disappear. Anybody's know if it's a bug or a normal behaviour? Track and picture attached. Thanks. Vincent FA18 Carret CRS.trk

Here you are! Thanks. Afghanistan Valley.miz

Another one here, but maybe beyond the limit of the current map : N33-42-31.19 E65-32-42.59. Screenshot in attached. Not sure I will survive in low level and high speed!

Hi, Any chance to have more nickname for the drone as JTAC? (as for ground units). Thanks, Vincent

Thank you very much.

Hi, After several tests and a full re-install of the script and apps, that does not works. On the A-10C II radio, when I pusht a rotary switch on the tablet, nothing happen on the app, but the button turn 90° to the left and stuck in this position. That's happening for all button. I have updated the app, the script, check the correct IP, network set to private. Do I have to install the scripts-extended? Thanks, Vincent

I will check h tomorrow, thanks Edit : That was that, thanks. I usually don't use this option, so I probably click on it inadvertently.

Hi, Some units does not appear in ME when I try to select them. It happen to armor vehicles, and the screenshots in attached show submarines disappears as well. It happen with all maps. I try a normal and a slow repairs without success. Thanks, Vincent

Hi, Just tested a JTAC with F-16 in Nellis in same conditions (hot start, same loading, sema JTAC, same frequency). The JTAC work perfectly. So, can the JTAC not answering be related to the map? Vincent

almost overhead. I notice another "bug" that why I am thinking that there is a problem with the F-16. When I start on ramp with the F-16, there is no message from the ATC. When I start with the F/A-18C, the ATC gives me the cleared for start-up. If I call the JTAC from ground with the F/A-18C, he answer.

Hi, Just setup a drone JTAC with Chevy as callsign. When I call from the F-16 (didn't try with other modules), he try to call Enfield! See screenshot in attached. WHY YOU DON'T TAKE CARE ABOUT THIS F**** JTAC? Please.

The JTAC from the target? 2nm maximum.

Hi Lord Vader, Tests made : 1. My mission with mod - JTAC ATGM HMMWV name change to Darknight : a. The JTAC answer to the leader on the ground, but not in the air (after a mission re-start) b. The JTAC answer to wingmans on the ground and in the air. 2. Same mission with all mods removed : a. very strange : the JTAC answer to the leader on the ground. After a re-start, I was able to contact him in the air, but he stop speaking in the middle of his message, and I was not able to contact him again. Seems like the JTAC disappear at a certain point. b. Same as the point 1. 3. Your mission JTACtest.miz : work perfectly with F-16 and F/A-18C. I notice you were using the "FAC - Engage group". In my mission, it was "FAC - Assign Group". So, I edited my mission and use "FAC - Engage Group", and the result is the same as point 2. Vincent Edit : I fly a full mission to how it works, but the JTAC does not answer to the wingman aircraft as well. This bug seems to be inconsistent.

I made a test with a drone instead of a armored vehicle, and all aircrafts was able to contact the JTAC. So, it seems that the problem is coming from the ground vehicles. Vincent

Hi Lord Vader, Thanks for your reply. Are you using the comm switch to contact JTAC? I am using the HOTAS switch set on "Transmit Switch - UHF (call radio menu)" Are you choosing the correct radio to do so? Yes, the UHF. Selecting the channel or entering manually the frequency have the same result. Also, are you using the "Easy Communication" option for this mission? No. Vincent.

To make it more difficult to understand : I able to contact the JTAC from wingman 2, 3 and 4 on the ground, but once in the air (after re-starting the mission), the JTAC does not answer!

Hi, Mission : Kola map - 4 F-16CM - Massun92 and SAMSitesAssetPack (objects only) - tracks attached JTAC From Leader.trk : 1. Leader contact the JTAC - no answer 2. Leader contact AWACS - the JTAC respond 3. Leader contact JTAC - no answer JTAC From Wingman.trk : Wingman contact the JTAC - the JTAC respond Personnal remark : I made the same test with the F/A-18C and the JTAC answer to leader and wingmans, so I suppose those mods have no influence on this bug (?). Thanks to have a look, Vincent JTAC From Leader.trk JTAC From Wingman.trk

Hi, I notice that the right brake does not work when the aircraft taxi to the right. The problem does not exist during a left turn. Track in attached. I checked and double-checked my flight controls, but everything works perfectly. The problem occurs only on the F--16. Thanks, Vincent F16 right Brake.trk

https://www.google.com/maps/place/Control+Tower+Setermoen+Range/@68.7541076,18.2504764,15z/data=!4m6!3m5!1s0x45db07f0ada0fafd:0xc70451358e681411!8m2!3d68.7541076!4d18.2504764!16s%2Fg%2F11h59ymg3_?entry=ttu

This map should be useful too : https://airportmap.de/airport/NO-0037/nearby There is also a helipad over the Bodo Nordland Hospital, but may be decommissioned in real world : 67°16'59.93"N 14°23'49.29"E

Hi, I try to make a mission in which Silkworm missile are fired against tanker and its escort. The AWACS does not detect the missile either by using 'request bogey dope' or request picture'. But If I lock the missile on the radar (with the F/A-18C) and select 'declare', the AWACS confirm it's a hostile. Track attached. Thanks, Vincent AWACS vs Silkworm.trk

Hi, https://en.m.wikipedia.org/wiki/Bas_60 Most of them are in the South, and I am not sure Vidsel will be available (limit of the map). So, the only possibility would be Jokkmokk?

Hi, Find something that can be useful : If I use Playboy, the JTAC is not recognized. If I use Axeman, it works!

Hi, I was working on a mission with multiple target and JTAC appearing randomly, but it seems that I am unable to contact the JTAC since the 2.9.4.53627 Hot fix. In the meantime, I start the mission from zero, but I am still not able to contact the JTAC! If I try the ATC, it works. I made a repair without success. Anybody have the same problem or have an explanation ? Mission and track in attached (Syria - F/A-18C - no mod). Thanks, Vincent EDIT 1 : I tried "Perform task" and "Start Enroute Task", but no change. EDIT 2 : The UAV is still working as JTAC, but infantery or vehicles cannot be called. JTAC - Afrin v0.1b.miz JTAC No Coms.trk