Jump to content


  • Posts

  • Joined

  • Last visited

Everything posted by eaglecash867

  1. Heh...I guess it all depends on how much ambient noise you have in the room and how much hearing loss you have. When I had the volume turned all the way up for the G2, I could barely hear it, and there was definitely no depth or dynamic range for me. Anyway, just putting that out there as a possible drawback to off-ear audio for people in similar circumstances.
  2. Off-ear audio was the main reason for my removing the off-ear speakers from my G2 and just using my Bose QC35s and a Avantree Bluetooth audio dongle. Don't know if its the same for the system in the link, but I couldn't deal with off-ear audio...I couldn't hear anything with it.
  3. To keep the Oculus app from running automatically, you can set the Oculus executable file to "Run as administrator". Once you have it set tht way, any time you do actually want to run the Oculus software, you just run it manually, and now it will pop up a window asking if you want to allow it to run. I read your other thread as well, and I feel your pain. I almost sent my Reverb back for the same reason. As it turns out, the main performance killer was the Pixel Density setting in DCS. With your Oculus, you were probably running a higher PD setting like I was with mine...I think I was running mine at 2.0. With my Reverb G2, I am currently running DCS PD at 0.7, with the SteamVR rendering factor set to 150% (I think...not home at the moment to confirm that). Checking those settings and getting them to something similar on your rig should take care of a major part of the problem. The other problem is that WMR headsets don't use ASW like Oculus headsets do. WMR headsets, through the SteamVR app, use Motion Reprojection. For dealing with that, have a look at my post here: Once you get those things squared away, you shouldn't have to ever mess with them again...except if you want to experiment with getting more eye candy. At that point, you'll find yourself much happier than you were initially. Mine runs great now.
  4. Thanks for the info, RackMonkey. I'm not using OpenXR at the moment, so I haven't seen what Motion Reprojection does with that. I just read in another thread, however, that it may be an issue with AMD cards.
  5. Performance and quality in VR are also very subjective things. Try not to get too wrapped up in what other guys are saying about their performance and quality with a Pimax versus what you're seeing with your G2. You say you're getting 40 FPS on your G2. Is there a reason you're not running Motion Reprojection on yours? You might try turning that on and seeing what that gets you for a performance gain. Your frame counter will lock at 45, but remember that Motion Reprojection's interpolated frames aren't visible to the counter, so the frame rate your eyes perceive will actually be between that 45 FPS and 90FPS.
  6. When you said the driver of the USB hub was installed, did you mean the driver that was on the disk that came with the card? If so, I wonder if that might be the problem. I know they tell you "You MUST install this driver" but I just looked at my rig's Device Manager, and it looks like mine is just using the standard Microsoft drivers for Windows 10. I think I remember hearing about other people having trouble with the drivers that come with the card. I never got as far as installing the driver that came with it because it worked right away, except for my mistake of not plugging in the power supply cable at first. Go to Device Manager and look at everything under Universal Serial Bus controllers (I would scroll down so the heading Universal Serial Bus Controllers is at the top of the window), then, plug in the power cord for your G2s power brick. You should see the Device Manager window reset itself within a few seconds as it responds to the headset. If it doesn't, it is probably not a USB issue. If it does, see if you can find what the new entry is under the Universal Serial Bus controllers. If you see an Inateck Controller or Hub show up, maybe you can try to update the driver to the generic driver on your computer. Also, you might have already tried this, but try unplugging all of your other USB devices and see if just the headset will run by itself. If it still doesn't, then you should talk to HP tech support like Edmuss suggested
  7. Komet, Do you have the internal connector on the card hooked up to your rig's power supply? It is set up to plug directly into a spare SATA power cable if you have one available. If not, it should have come with an adapter to let you make use of one of your other spare power supply connectors. It has to have that power supply connection to work properly with a VR headset. Not trying to over-simplify things. I had the same thing happen when I first got my card because I hadn't plugged in the power supply connector on it.
  8. Dodging missiles is one of the big advantages to VR. You have depth perception, as well as the 1:1 head movement that makes knowing how to maneuver instinctual. If you can see it, you can defeat it, often without using any countermeasures. As far as immersion breakers go, on the pancake, the immersion breakers are pretty much anything in the room for me. In VR, the only occasional immersion breaker is when an invisible cat paw comes through the side of the cockpit and touches my arm...or when the same invisible cat ends up in the rudder pedals while he's biting my feet.
  9. Yup. Normal for a G2, unfortunately. I ended up selling my G1 the other day, so I put it on briefly to make sure it still worked, and was a little reluctant to go through with the sale. The G1 had better edge-to-edge clarity. But, then I remembered all of the other issues the G1 inherently had...it definitely had much more noticeable screen-door effect, and I hated that short tow-rated cable it had.
  10. I have been flying DCS almost exclusively in VR since the days of the Oculus Rift CV1 and DCS 1.5. It took me a little while, experimenting with settings, mostly in DCS, to figure out what had the biggest impact on my individual experience. I found that there were a lot of things that some consider "essential" that were performance killers, and honestly, I found that I didn't miss any of those things after turning them off/down. Beyond that initial experimentation, and some occasional up-tweaking each time I built a new rig that could handle more, I haven't spent really any time on mods, tweaks, or chasing FPS dragons that the next guy said he was able to catch. It is what it is, and I'm happy with it. In my opinion, flying DCS on the pancake just doesn't do anything for me, no matter how much "better" things look. I was on a LONG hiatus from DCS until VR came along and gave it new life.
  11. You can prevent Oculus from starting automatically by going to the shortcut and selecting "Run as administrator".
  12. Follow this path on whatever drive you have Steam installed on: \Steam\steamapps\common\MixedRealityVRDriver\bin\win64\OpenVRSettingsUX.exe When you run that, a little black window will come up on your desktop screen. Click on the "Graphics" tab on the left, and that will show graphics settings for WMR, including the current Motion Reprojection status highlighted cyan. Just make sure yours is set for either "Auto" or "Motion Vector" It will stay set the way you set it until you go back in and change it. No DCS keypresses to remember, and no need for the hand controllers.
  13. In addition to Tom Kazansky's advice, SteamVR also has a habit of putting its little window right in the middle of your screen, so if you click something near the center of the DCS menu in VR, your mouse will become stuck in the SteamVR window and the pointer will no longer show in the DCS menu. In that case, you'll have to lift the G2 so you can see your monitor, fight the mouse to get it to minimize the SteamVR window, and then you should be good in DCS with a mouse pointer.
  14. Yup. That's exactly when I installed mine, and it was that exact card that Oculus recommended to everybody back in the day. Been using the same one ever since. Good to hear! Hope it solves all of your issues.
  15. Komet_82, it is a PCIe card, so it will plug into your PCIe X4 slot on the motherboard. There is a connector on the inboard side of the card that plugs into a SATA power cable from your rig's power supply. Then you just plug your G2's USB-C adapter into one of the USB ports on the card and you should be good.
  16. Komet_82, please have a look at my posts in this thread: There's a possibility that you're coming up short on USB power. Flying in DCS usually aggravates that problem because of all of the HOTAS stuff you plug in with that, as opposed to non-flight sim applications that may work fine. I can't run my G2 on a MB USB port, so I have it plugged into the card that I have listed in the thread. Works like a champ with that and the G2s USB-C adapter.
  17. BusPilot, I was running a G2 on an 8700K and GTX2080Ti before I started doing any serious upgrades and DCS ran really well for me. But, I don't do any flying on multi-player servers. How does it run with single player? If it also runs poorly on single player, try browsing the forum for some threads about tweaking performance. I'm thinking that with the way you have things configured currently, you'll end up dumping a bunch of money into upgrading, and its still not going to run all that well for you and end up being a huge disappointment. Lots of guys here with similar rigs to your current one that are getting good results. Once you get it tweaked and running well on what you have, any hardware upgrades you do will just be a bonus.
  18. I can't speak for the 5800X3D, but I'm loving the 12900KS rig that I just built with DDR5 memory. Check around on this forum and others about the RTX3090Ti, however. I recently tried helping someone with a 3090Ti who was having compatibility issues with his G2, and apparently that's an issue that has been reported elsewhere. I have the non-Ti RTX3090, and it runs great with my G2.
  19. That's kinda my point though. If your USB card doesn't have those connections, its not going to do anything to help, because its still using bus power from the motherboard. If your motherboard's bus power can't deliver enough current through that PCIEX4 slot, one card/headset combination may work while another combination doesn't. But, as long as you were able to return the 3090ti for a full refund, I guess the other thing doesn't matter at this point. Its a shame that MSI didn't provide you with better service, considering how much money you spent with them.
  20. If the USB card you plugged into your PCIE slot doesn't have a connector on the inboard side to let you plug into a spare power supply cable inside your machine, its not going to give you any more power than what any of your motherboard USB ports can provide. That won't do anything for you except compound the problem. Not sure why they even sell non-powered PCIE USB cards. LOL. This is what I have in my machine that solved my "Connect Cable" issues on my G2 when I went from the 2080ti to 3090. This or another brand with an internal power supply connection is what you need. Some here have had trouble with the Inatek card, but mine has always been solid. Note the extra connectors on the inboard side of the card in the pic, and the cables that are included for connecting it to your machine's power supply. https://www.amazon.com/gp/product/B00FPIMJEW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
  21. Just to check that you didn't make the same mistake I did when installing the USB card, did you plug the power connector on top of the card into a spare power supply cable in your machine? When I put mine in, I assumed the power receptacle on it was some sort of expansion port or something, so it didn't help anything on the first go.
  22. I had a similar issue when I upgraded from a GTX2080Ti to the RTX3090 because the 3090 didn't have an on-board USB C connector like my 2080Ti did. I used the USB C to USB A adapter that came with my G2, and that fixed the problem for me. But, the reason that worked is because I have an Inatek powered USB card plugged into the PCI Express X4 slot on my motherboard which is getting power from a connector that goes straight to my rig's power supply. The USB C port on my motherboard, as well as the USB A ports on the motherboard just didn't have enough juice to run the headset reliably. I started using that Inatek card way back in the days when I got my first VR headset, which was an Oculus Rift CV1, for the same reasons. Motherboard USB power may not be enough, depending on how many other USB devices you have plugged in. I have 3 external USB hard drives for file backup and audio/video server use which are on all the time, so my situation made the powered USB card necessary. I'm pretty sure your issue is from coming up short on USB power.
  23. Just get an Iron Flask cooler bottle. You can drink from it without lifting the HMD, and at worst you spill a drop or two if you happen to knock it over when the spout is open.
  24. Not $3500.00+ like the scalpers were trying to get.
  • Create New...