firefox121

It is due to a lines of code that puts simmapp pro in the export lua file, used to sincronize tje lights when you use a/a and a/g switch. Because you are in VR really don't need that, so close the aplication before enter DCS and search for the \Saved Games\DCS.openbeta\Scripts\Export.lua and then comment out those two lines like so -- local wwtlfs=require('lfs') -- dofile(wwtlfs.writedir()..'Scripts/wwt/wwtExport.lua') Or simply delete or rename the export.lua file and check

Yes, you shoud go to TRACKIR sofware, and in profiles , in the center option choose what yoy button wants to use (mine is button 5 in the lateral of mi orion hotas controller), then check the enable tick is selected and the exclusive tick too. Save the profile et voilá , you have the center key assigned to a button on your hotas.(or stick). Make sure you ALWAIS connect your devices in the same order, somerimes I Plugged my devices first (in my case) the hotas , then the stick and the TIR sofware seemed not to recognize the button.

If you are using a reverb G2, I use the voice recognition in WMR and saying "linterna activada" (in english see microsoft wmr voice recognition on your languaje) it shows me in a circle my pastrough video where I can see my MFD and my controls, when I reach them, saying "linterna desactivada" closes the passtrough. Hope it helps

Thanks, That's for the second question. What about the first question?

Dumb question : Question is, must I install the open composite 6.0 to all the pc first or, only installing "open-composite-acc-v0.6.2" via OvGME is enough? Question two, How must I launch DCS?, Must I add some line to the shorcut or just launch DCS? I have a Reverb G2 Thanks in advance for all your explanations and patience of all people here

Try this, terrain shadows off, clouds to medium and msaa off... and see what happens, also disable cockpit light or something like else. I have also preload radius to half and using VRPERF to 0.80 With this settings even in syria I get smooth as butter (Marianas is off the grid now) In Steam vr settings per in game app, I have DCS running to 80%, and in WMR retroprojection set in use "steam VR settings". Also in game video DCS I have force motion , It caps the sim to 45 fps but for me is enough , not blurr, etc, as I said smooth as silk

Yes of curse, I just jumped in a few minutes ago..... , only takeoff and fly......for me is stunning, great inmersion in pilots seat (not tryed copilot nor NVG yet) but it runs smooth as butter, all the mfds are readable running steam at 100%, ss 100% and vrperfkit_v0.2.2. with 0.8 , all cristal and clear in caucasus and nevada with stable 45FPS for me now is my best favorite module Just to say, HIND (in my case) demands more than this module.

How could I say.......in one world : BRUTAL Te inmersion is excelent, the mococule simply blast my mind, 45 stable FPS in caucasus on my rig (see my firm) , my new favorite helo (sorry huey ) A bit tricky to tearn at first the trim.....I will continue exploring the beast Whorths every euro wasted in my reverb g2, my 3080ti etc.....

- Day one : Bind axes and try to fly in a started engines mission. -Day Two to at least day twenty : trying to bind controls to feel comfortable with them * intering : trying to fly the beast , up down and land - Day twenty to the end of my life : fighting with keybinds and controls and loving the module I hope

please, can you be more specific, as I can imagine I must only bind 2 keys in the cronometer page or where, Is a bit confusing for me sorry, my mistake, I use the pilot's binds instead copilots.. Great effort, thanks in advance

hello , how can I "fire" rokets and hellfire in the first mission, I bind the keys in cronometer to hellfire and rockets, but the key "pilots ON else OFF" where is or what is ?

No, when you load a profile and push the run button, it stores on your input plane joystick folder, even if you close your simapp it will be there, if you make changes to this profile, be sure to rename it to your convenience, because if you run again the simapp and push the run button on the profile, it will overwrite yours, and all work done to suit it to you will be lost.

If you need more help (screenshots or something else) ask for them. Reverb G2, WMR and DCS are hard to config for a smooth use....most is try and retry.... As I said, this works for me with a reverb G2, I9-10850k, 32gb ram stored in a SSD and with a rtx 3080ti

Hello, ther is lots of guides over there, first you must see that in DCS the PD in the vr tab is in 1.0 then play with wmr settings and steam setting. For me , works fine steam at 100% resolution and in video mode for dcs 100% resolution and in retroprojection always on. this forces the fps to 45 but you will not see lag or blurriness In WMR, the video tab in retropojection use "steam settings" In game try terrain shadows off, shadows :i have them on medium , msaa off and ssaa x2 (msaa is a great frameseater, but with a 3090 you must try the opposite : msaa :x2 and ssaa :0) Water medium and with this I have 45 solid FPS with no blurr in almost all the terrains except marianas factor trees I have them on 50% and visibility to medium or far. I am using only the VRPERFKIT and all goes fine. Hope this help you

When you put your headset, and without removing it press windows+Y , make sure your windows key is not in game mode (some keyboards allow to pause this key) then hit LAlt+enter ro enter full screen mode, and make sure you have the VR mouse enabled in DCS. Hope this help.

If it works like the orion, you will see in the simapp , when you select the device, a graphic of it, on the TDC there is a grey label saying "swich mode", if you click on it should see first only axes, second axes and buttons and third only buttons, choose the one you prefer, close the simapp and thats all

I´ve noticed that in the new version 1.1 The green and blue indicators showed in the indicators control panel does not exist anymore. Am I doing something wrong or just disapeared?. Great Mod by the way. Very fun, a bit tricky to stop the beast but fun. Also In the special tab on the main menu, what is for "unsprung cyclic mode" and must be enabled or disabled?

Use the su33 binding and with this base rebind the keys you are not comfortable with. Almost all the keys in the FC3 module are the same, as it is a basic flight model(avionics). I use the same for SU27/su 33 and mig (almost the same) and for f15, there are four or five aa modes than can be binded almost same as the su 33 module

just open your SimApp utility (download from winwing website), first plug your two devices and run it. You must login with an account created for you. Then setup the aplication to point to your DCS installations folders, main folder and savegames folder. In the utility once logged, go to the keybinding label and let the app search for your dcs modules. Select one of you devices (grip or hotas) , select the module you want to program and search in the right window for it, it should show at least one or more modules of bindings. Donwload it and it will show in the left side, then click the run button, It shoud create an winwing grip (or Hotas) lua in your savegames folder input joystick of the module selected Same with the other device. You can now exit simapp pro utility, and you should see in your users\[username]\saved games\DCS\(Dcs.openbeta)\config\input\[..module..]\joystick two new files WINWING JOYSTICK BASE and WINWING THROTLE BASE or something like that... to know all has worked Then in game go to input blah blah blah in you module, clear the inputs and load the new ones Dont forget to asign yor axes at your preference. just open your SimApp utility (download from winwing website), first plug your two devices and run it. You must login with an account created for you. Then setup the aplication to point to your DCS installations folders, main folder and savegames folder. In the utility once logged, go to the keybinding label and let the app search for your dcs modules. Select one of you devices (grip or hotas) , select the module you want to program and search in the right window for it, it should show at least one or more modules of bindings. Donwload it and it will show in the left side, then click the run button, It shoud create an winwing grip (or Hotas) lua in your savegames folder input joystick of the module selected Same with the other device. You can now exit simapp pro utility, and you should see in your users\[username]\saved games\DCS\(Dcs.openbeta)\config\input\[..module..]\joystick two new files WINWING JOYSTICK BASE and WINWING THROTLE BASE or something like that... to know all has worked Then in game go to input blah blah blah in you module, clear the inputs and load the new ones Dont forget to asign yor axes at your preference.

Hello, I migrated from a saitek x56 rhino and the upgrade is awsome, You can add the rotary dials an axis function (think only one) but you can choose what, but the base has enough axes (two up/down in the right , plus one up down axe and a knob axis on the right throttle), always can bind it like stroke keys . Hope this help you

check your email, FEDEX usually sends you the import of custom taxes, maybe it is in your spawn email. I tracked the post, and when it arrives at my country FEDEX sent me a mail with the taxes to pay. Hope this help

Hello, I just received my unit to spain, the shipment cost are showed in the final bill , but wen it arrives at spain you must pay (in my case f18 stick + hotas) almost 24€ import taxes to FEDEX, so the final cost for my unit was $468.96+24€. (70€ shipping the two units) Hope this Help you. Is a great unit, you wont regret.

Maybe you must pushed the 4x32 square that changes the throttle to be compatible with il2 and other sims (think elite dangerous too), try to see if shows you a lable that says disable 4x32 button blah blah. also check if you have your firmware updated. You don't need the app, DCS recognizes all the buttons

there are two ways, the easiest is when you are in steam vr with your headset on, if you press in your right control yje key with tree horizontal stripes will bring you the steam menu, in the left bottm you must see the wmr icon, point at it and pres grab or tigger(dont remenber) and bring you a menu with options, in the graphics options, think is the segond dont' enable force directx button and in the retroprojection motion params , right ahead, select the first one , use steam vr blah blah... just like the photo atached. Don´t give up, reverb g2 is more demanding than oculus rift s (I upgraded from this one) and even with a RTX 3080 ti, you must downgrade some things.(shados ,etc), but when it runs smooth is fantastic....

I use almost the same configuration (only a 3080ti instead od 2080) for me to get a smooth experience, in DCS terrain textures to low (no great diference and great inpact on performance, also water in medium) od course no MSAA (nor x2 or x4) shadows on or off depends on your preferences (shadows has a huge impact on FPS) put them to flat or none. In steam VR settings motion smoothing off(it works well for me) and per aplicarion settings forced (It gives you stable 45fps and no sutter no ghost efect) In windows mixed portal, "use steam vr motion" Hope this helps you. P.D. is good in 1.0